WORK FEATURES OF HOLLOW SLABS OF FORMLESS MOLDING WITH PLATFORM SEAMS

Main Article Content

А. LAZOUSKI

Abstract

The paper gives the experimental results of strength intermediate floors made of the prestressed hollow core slabs with platform seams and with longitudinal reinforcement of high-strength wire with the diameter of 5 mm, produced by continuous formless molding method, which imposes peculiarities of their reinforcement in the form of transverse reinforcement near the seams and the risk of their destruction by cut of pillars. The scheme of destruction of the platform seams, depending on the amount of force pressing by the walls of the upper floors is experimen-tally established. It was experimentally confirmed that the work load of the intermediate floors of prestressed hollow core slabs with platform seams are characterized by the presence in the points of their bearing and jamming in the walls of the negative bending moment. The results of this study suggest the influence of the vertical pressing of the upper floors on the value of the negative bending moment, while the increasing of vertical pressing reduces compliance of node interface of floor slabs with the wall.

Article Details

How to Cite
LAZOUSKI А. (2013). WORK FEATURES OF HOLLOW SLABS OF FORMLESS MOLDING WITH PLATFORM SEAMS. Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences, (16), 45-50. Retrieved from https://journals.psu.by/constructions/article/view/8474

References

Прочность узлов сопряжения преднапряженных многопустотных панелей перекрытий со стенами / В.Г. Крамарь [и др.]. – М., 1982. – 19 с.

Расчет и проектирование дисков перекрытий с применением плит безопалубочного формования: Р 1.03.055.09 / Ин-т НИПТИС им. Атаева С.С. – Минск, 2009. – 25 с.

Плиты железобетонные многопустотные предварительно напряженные безопалубочного формования на оборудовании «Weiler» (Италия) для перекрытий и покрытий жилых, общественных и производственных зданий: Серия Б1.041.1-4.10. Вып. 3 / Ин-т НИПТИС им. Атаева С.С. – Минск

Плиты железобетонные многопустотные предварительно напряженные безопалубочного формования на оборудовании «Вибропресс» (Россия) для перекрытий и покрытий жилых, общественных и производственных зданий: Серия Б1.041.1-5.10 / Ин-т НИПТИС им. Атаева С.С.