TECHNOLOGY FOR DESIGNING BLOCK-MODULAR CUTTING TOOLS USING 3D-PRINTING OF MODELS PLASTIC MATERIALS
Article Sidebar
Main Article Content
Abstract
Тhe designs formation of modular cutting tools using a unified cutting block is considered, mathematical dependences are given for determining the geometric parameters of tools chip and flow-removing grooves, the results of computer and physical operation modeling of face mills and boring heads in liquid-free-flowing media, the advantages of technologies for designing and manufacturing cutting tools using 3D printing models compared to traditional technologies.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Modular systems – a new standard. Machinery and production engineering. – 1987. – № 3725. – P. 31–35.
Vasil'ev, A.L. (1989). Modul'nyi printsip formirovaniya tekhniki. M.: Izd-vo standartov. (In Russ.)
Popok, N.N. (2012). Analiz tendentsii proektirovaniya instrumental'nykh sistem. Chast' 1. Terminy i sistema oboznacheniya rezhushchikh plastin, derzhavok i modulei [Analysis of trends in the design of instrumental systems. Part 1. Terms and designation system for cutting inserts, holders and modules]. Vestnik Polotskogo gosudarstvennogo universitetata. Seriya V, Promyshlennost'. Prikladnye nauki [Bulletin of the Polotsk State University. Series B, Industry. Applied Science], (3), 71–81. (In Russ., abstr. in Engl.)
Popok, N.N. (2012). Analiz tendentsii proektirovaniya instrumental'nykh sistem. Chast' 2. Mekhanizmy krepleniya modulei. Vestnik Polotskogo gosudarstvennogo universitetata. Seriya V, Promyshlennost'. Prikladnye nauki [Bulletin of the Polotsk State University. Series B, Industry. Applied Science], (11), 11–19. (In Russ., abstr. in Engl.)
Popok, N.N. (2013). Analiz tendentsii proektirovaniya instrumental'nykh sistem. Chast' 3. Instrumental'nye sistemy dlya mnogotselevoi obrabotki [Analysis of trends in the design of instrumental systems. Part 3. Tool systems for multi-purpose processing]. Vestnik Polotskogo gosudarstvennogo universitetata. Seriya V, Promyshlennost'. Prikladnye nauki [Bulletin of the Polotsk State University. Series B, Industry. Applied Science], (3), 19–37. (In Russ., abstr. in Engl.)
Rusetskii, A.M., Vityaz', P.A., Kheifets, M.L., Danilov, V.A., Kiselev, R.A., Krut'ko, V.S. … Klimenko, S.A. (2014). Konstruirovanie i osnashchenie tekhnologicheskikh kompleksov. Minsk: Belarus. Navuka. (In Russ.)
Popok, N.N. & Portyanko, S.A. Podgotovka proizvodstva blochno-modul'nykh frez s ispol'zovaniem 3D-prototipirovaniya [Preparing the production of block-modular cutters using 3D prototyping]. Vestnik Vitebskogo gosudarstvennogo tekhnologicheskogo universitetata [Bulletin of the Vitebsk State Technological University], 1 (40), 94–106. (In Russ., abstr. in Engl.)
Popok, N.N. Portyanko, S.A. Tikhon, E.M. & Anisimov V.S. (2021). Modelirovanie i regulirovanie struzhkoobrazovaniya i potokov smazochno-okhlazhdayushchei tekhnologicheskoi sredy pri frezerovanii [Modeling and regulation of chip formation and flows of the lubricating-cooling technological medium during milling]. Vestnik BarGU. Seriya Tekhnicheskie nauki [Bulletin of the BarSU. Series Technical sciences], 1 (9), 27–36. (In Russ., abstr. in Engl.)
Most read articles by the same author(s)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, G. GVOZDZ, V. KUKAREKO, KINEMATIC AND TECHNOLOGICAL SUPPORT FOR FORMING THE REGULAR MICRORELIEF OF SPHERICAL SURFACES OF PARTS BY COMBINED CUTTING WITH CUTTING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- N. POPOK, R. HMELNITSKI, S. PORTYANKO, CONTROL OF HEAT AND COOLING FLOWS IN RAPID MACHINING OF INCOMPLETE SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- N. POPOK, N. BELYAKOV, S. SELEZNEV, B. BAZROV, CLASSIFIER OF STRUCTURAL AND TECHNOLOGICAL ELEMENTS WITH BOUNDARIES OF TRANSITION ZONES FOR PROCESSING PROGRAMMING ORIGINAL NON-ROUND PARTS ON CNC MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2025)
- N. POPOK, I. KUNTSEVICH, R. HMELNICKY, V. ANISIMOV, G. GVOZDZ, INFLUENCE OF TOOL CUTTING EDGE ANGLES AT ROUGHNESS OF THE PROCESSED SURFACE OF THE SPHERE , Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, PROCESSING TECHNOLOGY FOR PARTIAL SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- N. POPOK, A. GERASIMOV, E. TIKHON, IMPROVING THE ACCURACY OF BLOCK-MODULAR BORING CUTTING TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- N. POPOK, S. PORTSIANKO, METHODOLOGY FOR STUDYING THE PERFORMANCE OF AXIAL MILLING AND CUTTING TOOLS BASED ON 3D-PROTOTYPING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- N. POPOK, A. MAKSIMCHUK, S. PORTYANKO, IMPROVING OF FIXING SYSTEM OF CUTTING INSERTS AND CUTTING BLOCKS IN BLOCK-MODULAR CUTTING TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- N. POPOK, S. PORTSIANKO, A. MAKSIMCHUK, IMPROVING THE DESIGN OF BLOCK-MODULAR FACE MILLS BASED ON THE RESEARCH OF CUTTING PROCESS CHARACTERISTICS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- N. POPOK, I. KUNCEVICH, R. HMELNICKY, V. ANISIMOV, MODELLING OF INFLUENCE OF ROUGHNESS OF THE SPHERICAL SURFACE OF THE PART ON FEED SPEED SELECTION OF THE ROTATING CUTTING TOOL, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)