ANALYSIS OF THERMOCOUPLES FOR MEASURING TEMPERATURE IN RUBBER MIXERS
Article Sidebar
Main Article Content
Abstract
The article analyzes domestic and foreign thermoelectric converters (thermocouples) for measuring the temperature of the rubber in rubber mixers. The advantages and disadvantages of existing thermocouple designs are considered, and the thermocouple design developed by Point LLC is presented. A comparative analysis of the influence of the material of thermocouple tips, the coating material of the tips and the diameter of the thermocouple wires on the strength characteristics of the finished product, as well as on the indicators of the thermal lag index, is presented. The results of tests for temperature inertia of the developed thermocouples and its analogue are shown. Recommendations are given for conducting pilot-industrial operation during the development and research of new designs of thermocouples for rubber mixers. The results of a joint test of a thermocouple from Point LLC and a foreign analogue are shown in the form of a temperature trend.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Andrashnikov, B.I., Antonov, L.M., Barskov, D.M., Gershman, B.G., Kepersha, L.M., Pinegin, V.A., … Tsyganok, I.P. (1975). Mashiny i apparaty rezinovogo proizvodstva. Moscow: Khimiya. (In Russ.)
Most read articles by the same author(s)
- N. POPOK, R. HMELNITSKI, S. PORTYANKO, CONTROL OF HEAT AND COOLING FLOWS IN RAPID MACHINING OF INCOMPLETE SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- N. POPOK, N. BELYAKOV, S. SELEZNEV, B. BAZROV, CLASSIFIER OF STRUCTURAL AND TECHNOLOGICAL ELEMENTS WITH BOUNDARIES OF TRANSITION ZONES FOR PROCESSING PROGRAMMING ORIGINAL NON-ROUND PARTS ON CNC MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2025)
- N. POPOK, I. KUNTSEVICH, R. HMELNICKY, V. ANISIMOV, G. GVOZDZ, INFLUENCE OF TOOL CUTTING EDGE ANGLES AT ROUGHNESS OF THE PROCESSED SURFACE OF THE SPHERE , Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, PROCESSING TECHNOLOGY FOR PARTIAL SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- N. POPOK, A. GERASIMOV, E. TIKHON, IMPROVING THE ACCURACY OF BLOCK-MODULAR BORING CUTTING TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- N. POPOK, S. PORTYANKO, E. TIKHON, TECHNOLOGY FOR DESIGNING BLOCK-MODULAR CUTTING TOOLS USING 3D-PRINTING OF MODELS PLASTIC MATERIALS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- N. POPOK, S. PORTSIANKO, METHODOLOGY FOR STUDYING THE PERFORMANCE OF AXIAL MILLING AND CUTTING TOOLS BASED ON 3D-PROTOTYPING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- N. POPOK, A. MAKSIMCHUK, S. PORTYANKO, IMPROVING OF FIXING SYSTEM OF CUTTING INSERTS AND CUTTING BLOCKS IN BLOCK-MODULAR CUTTING TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- N. POPOK, S. PORTSIANKO, A. MAKSIMCHUK, IMPROVING THE DESIGN OF BLOCK-MODULAR FACE MILLS BASED ON THE RESEARCH OF CUTTING PROCESS CHARACTERISTICS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- N. POPOK, I. KUNCEVICH, R. HMELNICKY, V. ANISIMOV, MODELLING OF INFLUENCE OF ROUGHNESS OF THE SPHERICAL SURFACE OF THE PART ON FEED SPEED SELECTION OF THE ROTATING CUTTING TOOL, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)