DEFORMATION AND CHIP FORMATION WHEN PROCESSING FLAT AND CURVED SURFACES OF PARTS WITH A ROTATING CUTTING TOOL ON CNC LATHES AND MILLING MACHINES
Article Sidebar
Main Article Content
Abstract
Diagrams of processing and formulas for calculation of factors of thickening, shortening and widening of the chip, normal forces and friction, work of deformation and friction, the analysis of these diagrams and formulas and the dependence of the characteristics of the cutting process of changing the angle of inclination of the tool cutting edge.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Бобров, В.Ф. Влияние угла наклона главной режущей кромки инструмента на процесс резания металлов / В.Ф. Бобров – М. : Машгиз, 1962. – 152 с.
Попок, Н.Н. Кинематика обработки поверхностей деталей вращающимся режущим инструментом с касательным движением режущей кромки / Н.Н. Попок, В.С. Анисимов // Вестн. Полоц. гос. ун-та. Сер. В, Промышленность. Прикладные науки. – 2019. – № 11. – С. 31–38.
Брикс, А.А. Резание металлов (строгание) / А.А. Брикс. – СПб. : Тип. М.М. Стасюлевича, 1896. – 163 с.
Merchant, М.Е. Basic Mechanics of the Metal Cutting Process / М.Е. Merchant // Transactions of the ASME. – 1944. – Vol. 66.
Справочник технолога-машиностроителя : в 2 т. / под ред. А.М. Дальского [и др.]. – 5-е изд., перераб. и доп. – М. : Машиностроение-1, 2001. – Т. 2. – 912 с.
Most read articles by the same author(s)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, PROCESSING TECHNOLOGY FOR PARTIAL SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- А. DOLGIKH, A. ANDRUKOVICH, L. KOSYAK, V. ANISIMOV, THE EFFECT OF THE PERCENTAGE OF THE ACTIVATOR TYPE AND THE BALLAST ADDITIVE Al2O3 ON THE SURFACE ROUGHNESS OF DIFFUSION CHROME AND VANADED LAYERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- N. POPOK, R. HMELNITSKI, S. PORTYANKO, CONTROL OF HEAT AND COOLING FLOWS IN RAPID MACHINING OF INCOMPLETE SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- N. POPOK, I. KUNTSEVICH, R. HMELNICKY, V. ANISIMOV, G. GVOZDZ, INFLUENCE OF TOOL CUTTING EDGE ANGLES AT ROUGHNESS OF THE PROCESSED SURFACE OF THE SPHERE , Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- N. POPOK, V. ANISIMOV, DYNAMICS OF MECHANICAL MACHINING WITH END MILLS ON CNC MACHINE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- N. POPOK, A. FRIK, ANALYSIS OF THERMOCOUPLES FOR MEASURING TEMPERATURE IN RUBBER MIXERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, G. GVOZDZ, V. KUKAREKO, KINEMATIC AND TECHNOLOGICAL SUPPORT FOR FORMING THE REGULAR MICRORELIEF OF SPHERICAL SURFACES OF PARTS BY COMBINED CUTTING WITH CUTTING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- N. POPOK, S. PORTSIANKO, A. MAKSIMCHUK, IMPROVING THE DESIGN OF BLOCK-MODULAR FACE MILLS BASED ON THE RESEARCH OF CUTTING PROCESS CHARACTERISTICS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- N. POPOK, M. CHERNEVICH, G. GVOZD, MODEL AND ALGORITHM FOR DESIGNING OF BLOCK-MODULAR CUTTING TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- N. POPOK, A. BALYSH, NON-WELDED SEALED FITTINGS FOR SMALL DIAMETER PIPELINES AND TUBING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)