A NEW APPROACH TO THE CONCRETE STRUCTURES DESIGN: SECOND GENERATION OF EUROCODES AND NATIONAL CODES
Article Sidebar
Main Article Content
Abstract
The article presents a brief analysis of the experience of application of European standards for the design of reinforced concrete structures EN 1992-1 in both international and national practice. The advantages and disadvantages of internalization in the development of normative documents of different countries are shown. The basic principles underlying the development of Eurocodes of the second generation, as well as the main directions of improvement of normative documents on the design of reinforced concrete structures are considered. It is shown that one of the main tasks in the near future should be considered the preservation and improvement, taking into account the international achievements of national standards.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Warlaven, J. Codes of Practice: Burden or Inspiration? / J. Warlaven «High Tech concrete : Where technology and Engineering meet» : fib Symposium in Maastricht, June 2017. – P. XIII–XXIV.
Eurocode 2 – analysis of National Annex / A. Ignatiadis [et al.] // Structural Concrete. – 2015. – № 1.
Пецольд, Т.М. Особенности перехода в Республике Беларусь на проектирование железобетонных конструкций по европейским нормативным документам / Т.М. Пецольд, Н.А. Рак, В.В. Тур // Техническое регулирование в строительной отрасли в современных условиях : материалы междунар. науч.-практ. конф., Минск, 21 мая 2015 г. – Минск : СтройМедиаПроект, 2015. – С. 18–25.
Goodchild, Ch. Eurocodes revision – an update / Ch. Goodchild // Concrete. – 2016. – April. – P. 53–54.
Здания и сооружения, строительные материалы и изделия. Безопасность : техн. регламент Респ. Беларусь (ТР 2009/013/BY). – Минск : Госстандарт Респ. Беларусь, 2012. – 26 с.
Walraven, J. (Ed.) «fib Model Code for Concrete Structures 2010», September 2013 (fib Bulletin 65 and 66).
Бетонные и железобетонные конструкции : СНБ 5.03.01-02, 2003. – Минск : Изд. офиц. ; М-во архитектуры и стр-ва Респ. Беларусь, 2003. – 139 с.
Проектирование конструкций из бетона. Общие правила для зданий : ТКП EN 1992-1-1 (EC2) (IDT: EN 1992-1-1:2004: Design of Concrete Structures. General rules and rules for buildings). – 276 p.
Железобетонные конструкции. Основы теории расчета и конструирования : учеб. пособие ; под ред. Т.М. Пецольда и В.В. Тура. – Брест : БГТУ, 2003. – 380 с.
Тур, В.В. Прочность и деформации бетона в расчетных конструкциях / В.В. Тур, Н.А. Рак. – Брест : БрГТУ, 2003. – 252 с.
Основы проектирования строительных конструкций: ТКП EN 1990 (IDT: EN 1990: 2002 Basis of Structural Design). – Минск : ЦИТП, 2012 – 126 с.
Бетонные и железобетонные конструкции : СНБ 5.03.01-02. – Введ. 01.07.2003. – Минск : М-во стр-ва и архитектуры Респ. Беларусь, 2003. – 144 с.
Пецольд, Т.М. Опыт внедрения в Республике Беларусь европейских нормативных документов по проектированию железобетонных конструкций / Т.М. Пецольд, Н.А. Рак, В.В. Тур // Строительная наука и техника. – 2012. – № 2 – С. 94–96.
Перельмутер, В.А. Готовы ли мы перейти к нелинейному анализу при проектировании? / В.А. Перельмутер, В.В. Тур // International Journal for Computational Civil and Structural Engineering. – 2017. – № 13(3). – Р. 86–102.
Tur, V. Control of the transmission length in the prestressed hollow-core slabs using values of the strand end slip / V. Tur, S. Fic // Budownictwo i Architektura. – 2013. – № 12 (1). – P. 171–178.
Einheitliches Bemessungsmodell gegen Durchstanzen in Flachdecken und Fundamenten / D. Kueres [u. a.] // Beton und Stahlbeton. – 2016. – H. 1.
EN 1168-2005+A2:2009 Precast concrete products – Hollow core slabs.
SIA 262:2003, Swiss Standard : Concrete Structures.
Tur, V. Safety format for non-linear pseudo-static response of the RC-structural systems in accidental design situations / V. Tur, A. Tur // Modern Engineering. – 2017. – № 1. – P. 3–14.
Fibre Reinforced Polymer Reinforcement Enters fib Model Code 2010. Structural Concrete, 14.
ISO 13822. Basis for design of structures – Assessment of existing structures.
Gotdyn, M. O propozycji zmian dotyczących cych obcych їenia fundamentуw na przebicie, wynikaj cej z prac nad drugą generacją norm europejskich / M. Gotdyn // Inїynieryja i Budownictwo. – 2018. – № 25. – S. 237–243.
Cervenka, V. Global safety formats in fib Model Code 2010 for design of Concrete Structures / V. Cervenka // Proceeding of the 11th International Probabilistic Workshop, Brno, 2013. – P. 27–31.
Cervenka, V. Reliability – based non-linear analysis according to fib Model Code 2010 / V. Cervenka // Structures Concrete, diurnal of fib. – 2013. – Vol. 14, March. – P. 19–28.
Safety format for the non-linear analysis of Concrete Structures / G. Bertagnoli [et al.] // Studies and Researches. – 2004. – Vol. 25 ; Polytechnico di Milano, Italy.
Cervenka, V. (ed.): SARA – Structural Analysis and Reliability Assessment : User’s manual / V. Cervenka consulting, Prague, 2003. – 128 p.
Safety Format for the non-linear analysis of Concrete Structures / H. Schlune [et al.] // Engineering Structures ; Elsevier. – 2011. – Vol. 33, № 8, August.
Siburg, C. Zum einheitlichen Bemessung gegen Durchstanzen in Flachdecken und Fundamenten : Dissertation RWTH Aachen / C. Siburg ; Institut für Massivbau, 2014.
New European Technical Rules for the Assessment and Retrofitting of Existing Structures (Prospect for CEN Guidance) / P. Luechinger, J. Fischer : JRC, 2015. – 137 p.
Background of the fib Model Code 2010 Shear Provisions. – Part II. Punching Shear. Structural Concrete.
Most read articles by the same author(s)
- A. VARABEI, V. TUR, EXPERIMENTAL STUDIES OF THE RESISTANCE SHEAR OF SELF-STRESSED CONCRETE BEAMS UN-DER DIFFERENT LOADING CONDITIONS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2021)
- V. TUR, A. LAZOUSKI, COMPUTATIONAL MODEL OF BENDING STRENGTH OF HOLLOW CORE SLAB FLOORS AS PARTS OF PLATFORM JOINTS OF BUILDINGS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2016)
- V. TUR, V. SANNIKAVA, A DESIGN MODEL FOR RESTRAINED STRAINS ESTIMATION AT EXPANSION STAGE OF CONCRETE IN TWO-WAY RESTRAINT CONDITIONS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2016)
- I. LAZOUSKAYA, R. ANDREEVA, V. TUR, DURABILITY EVALUATION OF SULFUR CONCRETE OF VARIOUS COMPOSITION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2019)
- V. SANNIKAVA, V. TUR, THE VERIFICATION OF “STRUT-AND-TIES” MODEL FOR THE SINGLE REINFORCED CONCRETE BEAMS WITH THE CONCENTRATED LOAD, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2018)
- А. TUR, V. TUR, ON THE APPLICATION OF NONLINEAR ANALYSIS IN THE DESIGN OF STRUCTURAL SYSTEMS OF REINFORCED CONCRETE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- N. RYABENKO, V. TUR, SETTING TO DETERMINE THE LENGTH OF THE ZONE OF TRANSMISSION OF STRESS IN THE PRE-STRESSED REINFORCEMENT CONCRETE ELEMENTS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- V. TUR, V. NADOLSKI, F. VEREVKA, PRINCIPLES OF CALCULATION OF DESIGN COMBINATIONS IN ACCORDANCE WITH TCP EN 1990, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2018)
- V. TUR, A. PIKULA, EXPERIMENTAL STUDIES OF ECOLOGICALLY-CLEAN THERMAL INSULATION NON-AUTOCLAVE COMPOSITES BASED ON FLAX SHIVE AND DIFFERENT KINDS OF LIME CONTAINING BINDERS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2015)