POROUS WALL CERAMICS WITH BURNOUT ADDITIVE FROM FLAX BOON
Article Sidebar
Main Article Content
Abstract
Advantages and technologies of porous ceramics production are considered. The experience of using burnout additives of different origin for wall ceramics is analyzed. In the work it is proposed to use a flax boon fraction of not more than 2 mm as a burnout additive. Density and strength of ceramic samples were determined. The dependence of the average density and strength of the ceramic shard on the consumption of flax boon, including the use of superplasticizer S-3. The positive effect of the use of superplasticizer S-3 on the compressive strength of porous ceramic samples was established. The data on frost resistance and thermal conductivity of porous wall ceramics samples obtained by using flax boon as a burnout additive are presented.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Akberov, A.A. Tekhnologiya i svoystva vysokoporistogo keramicheskogo materiala : avtoref. dis. … kand. tekhn. nauk : 05.23.05 / A.A. Akberov ; Sankt-Peterburgskiy arkhitekturno-stroitelnyy universitet. – Sankt-Peterburg, 2005. – 21 s.
Tammov, M.Ch. Energoeffektivnyye poristokeramicheskiye materialy i izdeliya : avtoref. dis. … doktora tekhn. nauk : 05.23.05 / M.Ch. Tammov ; Nauchno-issledovatelskiy proyektno-konstruktorskiy i tekhnologicheskiy institut betona i zhelezobetona. – Moskva, 2006. – 39 s.
Rogovoy, M.I. Tekhnologiya iskusstvennykh poristykh zapolniteley i keramiki / M.I. Rogovoy. – M. : Stroyizdat, 1974. – 315 s.
Revva, I.B. Stroitelnaya keramika na osnove kompozitsiy legkoplavkikh glin s neplastichnymi prirodnymi i tekhnogennymi komponentami : avtoref. dis. … kand. tekhn. nauk : 05.17.11 / I.B. Revva ; Tomskiy politekhnicheskiy universitet. – Tomsk, 2005. – 23 s.
Kornilov, A.V. Netraditsionnyye vidy nerudnogo syria dlya proizvodstva stroitelnoy keramiki / A.V. Kornilov // Stroitelnyye materialy. – 2005. – № 2. – S. 50–51.
Putro, N.B. Porizovannaya stroitelnaya keramika (sostav, tekhnologiya, svoystva) : avtoref. dis. … kand. tekhn. nauk : 05.23.05 / N.B. Putro ; Novosibirskiy gosudarstvennyy arkhitekturno-stroitelnyy universitet (Sibstrin). – Novosibirsk, 2004. – 24 s.
Kotlyar, V.D. Opoki – perspektivnoye syrye dlya stenovoy keramiki / V.D. Kotlyar, B.V. Talpa // Stroitelnyye materialy. – 2007. – № 2. – S. 31–33.
Zolotarskiy, A.Z. Proizvodstvo stroitelnogo kirpicha / A.Z. Zolotarskiy. – M. : Stroyizdat, 1989. – 264 s.
Gabidullin, M.G. Nauchnyye i tekhnologicheskiye osnovy upravleniya strukturoy i svoystvami energoi resursosberegayushchey stroitelnoy keramiki : avtoref. dis. … doktora tekhn. nauk : 05.23.05 / M.G. Gabidullin ; Kazanskiy arkhitekturno-stroitelnyy universtitet. – Kazan, 2006. – 51 s.
Dmitriyev, K.S. Poristaya keramika: sovremennoye sostoyaniye i perspektivy / K.S. Dmitriyev // Mezhdunarodnyy zhurnal eksperimentalnogo obrazovaniya. – 2016. – № 7. – S. 152–154.
Prospects for using industrial waste in production of ceramic building materials / D.V. Makarov [et. al.] // Gornyy informatsionno-analiticheskiy byulleten’. – 2016. – No. 5. – P. 254–281.
Raut, S.P. Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks / S.P. Raut, R.V. Ralegaonkar, S.A. Mandavgane // Construction and Building Materials. – 2011. – V. 25. – P. 4037–4042.
Fired clay bricks manufactured by adding wastes as sustainable construction material – A review / P. Muñoz [et. al.] // Construction and Building Materials. – 2014. – V. 63. – P. 97–107.
Monteiro, S.N. On the production of fired clay bricks from waste materials: A critical update / S.N. Monteiro, C.M. Fontes Vieira // Construction and Building Materials. – 2014. – V. 68. – P. 599–610.
Halil, M.A. Cotton and limestone powder waste as brick material / M.A. Halil, P. Turgut // Construction and Building Materials. – 2008. – V. 22. – P. 1074–1080.
Demir, I. An investigation on the production of construction brick with processed waste tea // Building and Environment. – 2006. – V. 41. – P. 1274–1278.
Assessment of olive mill solid residue (pomace) as an additive in lightweight brick production / M. Dolores La Rubia-Garcнa [et. al.] // Construction and Building Materials. – 2012. – V. 36. – P. 395–500.
De la Casab, J.A. Recycling of washed olive pomace ash for fired clay brick manufacturing / J.A. De la Casab, E. Castro // Construction and Building Materials. – 2014. – V. 61. – P. 320–326.
Replacement of the mixing fresh water by wastewater olive oil extraction in the extrusion of ceramic bricks / D. Eliche-Quesada [et. al.] // Construction and Building Materials. – 2014. – V. 68. – P. 659–666.
Eliche-Quesada, D. Effect of sludge from oil refining industry or sludge from pomace oil extraction industry addition to clay ceramics / D. Eliche-Quesada, R. Azevedo-Da Cunha, F.A. Corpas-Iglesias // Applied Clay Science. – 2015. – V. 114. – P. 202–211.
Properties of fired clay bricks with incorporated biomasses: cases of olive stone flour and wheat straw residues / L. Aouba [et. al.] // Construction and Building Materials. – 2016. – V. 102. – P. 7–13.
Cvoystva keramicheskikh stenovykh materialov pri vvedenii razlichnykh vygorayushchikh komponentov / I.V. Pishch [et. al.] // Steklo i keramika. – 2015. – № 2. – S. 19–23.
Rusak, G. Keramika dlya teplykh sten. Perspektivy proizvodstva i primeneniya porizovannoy keramiki v respublike Belarus / G. Rusak // Masterskaya. – 2007. – № 1–2. – S. 84–89.
Ivanenko, A.M. Svoystva stenovykh keramicheskikh materialov, poluchayemykh s ispolzovaniyem vygorayushchikh dobavok na osnove mestnogo Syria / A.M. Ivanenko, V.V. Bozylev, A.A. Bakatovich // Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F, Prikladnyye nauki. – 2005. – № 9. – S. 121–127.
Most read articles by the same author(s)
- A. BAKATOVICH, N. BAKATOVICH, R. OBROMPALSKY, F. GASPAR, PROSPECTS FOR THE USE OF EUCALYPTUS BARK AS A STRUCTURE-FORMING MATERIAL FOR THERMAL INSULATION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 2 (2023)
- A. YAGUBKIN, D. SHABANOV, Y. JINBIN, INFLUENCE OF TEMPERATURE ON THE THERMO-HUMIDITY CONDITIONS OF WALL MATERIALS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2021)
- A. DALZHONAK, A. BAKATOVICH, THE RESEARCH OF THERMOPHYSICAL CHARACTERISTICS OF WALL MATERIALS IN THE CONDITIONS OF USE OF A BUILDING, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2018)
- D. SHABANOV, I. ILMYRADOV, S. MATNIYAZOV, INFLUENCE OF SUPERPLASTICIZER ON STRUCTURE FORMATION OF CEMENT STONE IN SALT MEDIUM, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2019)
- E. BRYANTSEV, D. SHABANOV, YAGUBKIN YAGUBKIN, TO THE QUESTION OF THE CHOICE OF OPTIONS OF VOLUME-PLANNING AND CONSTRUCTION DECISIONS WHEN DESIGNING LARGE PANEL RESIDENTIAL BUILDINGS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2018)
- E. BOROVKOVA, D. SHABANOV, PHYSICAL PROPERTIES OF STRUCTURAL CHANGES IN CONCRETE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2021)
- A. BAKATOVICH, N. DAVYDENKO, M. ROZYYEV, INSULATING MATERIAL ON A FILLER FROM COTTON FIBER PROCESSING WASTE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2019)
- D. SHABANOV, Е. ZIABKIN, E. TRAMBITSKIY, COMPUTER SIMULATION FIBERGLASS REINFORCEMENT WITH PERIODIC PROFILE AND COMPUTER EXPERIMENT EVALUATING ITS PERFORMANCE PROPERTIES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2016)
- D. SHABANOV, E. BRIANTSEV, I. KRUPENCHIK, RECOVERY IN ENCLOSING STRUCTURES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2020)
- A. BAKATOVICH, MICROSTRUCTURE AS A BASIC CRITERION DETERMINING THE USE OF SPHAGNUM MOSS AS A FILLER FOR EFFECTIVE PLATE THERMAL INSULATING MATERIAL, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2017)