DURABILITY EVALUATION OF SULFUR CONCRETE OF VARIOUS COMPOSITION
Article Sidebar
Main Article Content
Abstract
With an increase in volume and an increase in the depth of oil refining, the amount of produced by-products, in particular sulfur, increases. One of the ways to diversify the sulfur market is to use it in non-standard industries, in particular, in construction. Sulfur concrete is a new building material based on sulfur binder. The study of the properties of sulfur concrete is relevant in connection with an increase in depth and an increase in oil refining volumes. In this article, the authors consider the influence of the type of filler used on the strength of sulfur concrete with short-term compression. In addition, the influence of the percentage of sulfur as a binder for the production of sulfur concrete on compressive strength was analyzed.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Невельский, А. Добыча нефти в мире впервые достигла 100 млн. баррелей в день [Электронный ресурс] / А. Невельский // Ведомости (Бизнес/ТЭК). – 2018 (13.09). – Режим доступа: https://www.vedomosti.ru. –Дата доступа: 18.06.2019.
Волгушев, А.Н. Применение серы в строительстве [Электронный ресурс] / А.Н. Волгушев // Аналитический портал химической промышленности Newchemistry.ru. – Режим доступа: http://www. newchemistry.ru/letter.php?n_id=4348. – Дата доступа: 18.06.2019.
Сера техническая. Технические условия : ГОСТ 127.1-93. – Введ. 1997-01-01.
Мука известняковая (доломитовая). Технические условия : ГОСТ 14050-93. – Введ. 1995-01-01.
Щебень и гравий из плотных горных пород для строительных работ. Технические условия : ГОСТ 8237-93 (с изм. № 1–4). – Введ. 1995-01-01.
Песок для строительных работ. Методы испытаний : ГОСТ 8735-88 (с изм. № 1, 2, испр.). – Введ. 1989-07-01.
Реактивы. Йод. Технические условия : ГОСТ 4159-79. – Введ. 1980-07-01.
Бетоны. Методы определения прочности по контрольным образцам : ГОСТ 10180-2012. – Введ. 2013-07-01.
Most read articles by the same author(s)
- A. VARABEI, V. TUR, EXPERIMENTAL STUDIES OF THE RESISTANCE SHEAR OF SELF-STRESSED CONCRETE BEAMS UN-DER DIFFERENT LOADING CONDITIONS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2021)
- V. TUR, A. LAZOUSKI, COMPUTATIONAL MODEL OF BENDING STRENGTH OF HOLLOW CORE SLAB FLOORS AS PARTS OF PLATFORM JOINTS OF BUILDINGS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2016)
- V. TUR, V. SANNIKAVA, A DESIGN MODEL FOR RESTRAINED STRAINS ESTIMATION AT EXPANSION STAGE OF CONCRETE IN TWO-WAY RESTRAINT CONDITIONS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2016)
- V. SANNIKAVA, V. TUR, THE VERIFICATION OF “STRUT-AND-TIES” MODEL FOR THE SINGLE REINFORCED CONCRETE BEAMS WITH THE CONCENTRATED LOAD, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2018)
- V. TUR, T. PETCOLDT, N. RAK, A NEW APPROACH TO THE CONCRETE STRUCTURES DESIGN: SECOND GENERATION OF EUROCODES AND NATIONAL CODES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2018)
- N. RYABENKO, V. TUR, SETTING TO DETERMINE THE LENGTH OF THE ZONE OF TRANSMISSION OF STRESS IN THE PRE-STRESSED REINFORCEMENT CONCRETE ELEMENTS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- А. TUR, V. TUR, ON THE APPLICATION OF NONLINEAR ANALYSIS IN THE DESIGN OF STRUCTURAL SYSTEMS OF REINFORCED CONCRETE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- V. TUR, V. NADOLSKI, F. VEREVKA, PRINCIPLES OF CALCULATION OF DESIGN COMBINATIONS IN ACCORDANCE WITH TCP EN 1990, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2018)
- V. TUR, A. PIKULA, EXPERIMENTAL STUDIES OF ECOLOGICALLY-CLEAN THERMAL INSULATION NON-AUTOCLAVE COMPOSITES BASED ON FLAX SHIVE AND DIFFERENT KINDS OF LIME CONTAINING BINDERS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2015)