METHODS FOR REMOTE QUALITY CONTROL OF COMPOSITES WITH ORGANIC AGGREGATES
Article Sidebar
Main Article Content
Abstract
The Chinese construction industry has been using the Internet of Things (IoT) to monitor building materials and structures for many years. The achievements of the Chinese construction industry in IoT applications can be used to study and monitor the performance of building materials, including green buildings (energy-efficient building materials).
The aim of research: study and optimization methods for remote quality control of composites with organic aggregates.
With the help of the developed methods, the following dependencies were obtained: dependences of stresses inside composites with organic aggregates on external influences obtained using a sensor Keyes brick thin film pressure sensor, dependences of deformations inside composites with organic aggregates on external influences obtained using a sensor ultrasonic ranging sensor, dependences of humidity inside composites with organic aggregates on external influences obtained using a sensor Soil moisture sensor, dependences of rheology (cement paste setting time) obtained using a sensor Ph-sensor module.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Xiu, J., Yazhi, J. & Huanchun, Z. (2001). Realization of frequency measurement of vibrating wire sensor by equal-precision frequency measurement method. Sensor Technology, 06, 53–55.
Dongliang, Z. (2018). Design and implementation of wifi-based IoT intelligent building control system. Nanjing University of Posts and Telecommunications, 19, 23–25.
Zhijun, G. (2014). Research on building safety monitoring technology based on wireless sensor network. Dalian University of Technology, 01, 122–128.
Xiaomeng, S., Xin, F. & Jing, Z. (2005). Sensor optimization method based on damage identifiability. Journal of Dalian University of Technology, 50 (02), 264–270.
Xu, W. (2005). “75·8” event of Shimantan Reservoir. China Flood Control and Drought Relief, (03), 27–37.
Liangming, M., Weisheng, W. & Shengsan, S. (2002). Application of vibrating wire sensor and automatic network measurement system in bridge safety monitoring system. Journal of Sensing Technology, (01), 73–76.
Taili, B., Ling, H., Caiyun, H. & Tieliu, D. (2017). Multifunctional intelligent detector based on vibrating wire sensor. Sensor Technology, (03), 60–62.
Jinkai, W. (2007). Research on IoT Node Information Collection and Credibility Measurement Method. University of Electronic Science and Technology of China, 08, 47–51.
Gutkowski, R., Brown, K., Shigidi, A. & Natterer, J. (2008). Laboratory tests of composite wood-concrete beams. Construction and Building Materials, (22), 1059–1066. DOI: 10.1016/j.conbuildmat.2007.03.013.
LeBorgne, M.R. & Gutkowski, R. (2010). Effects of various admixtures and shear keys in wood-concrete composite beams. Construction and Building Materials, (24), 1730–1738. DOI: 10.1016/j.conbuildmat.2010.02.016.
Kevern, T.T., Biddle, D. & Cao, Q. (2015). Effects of macrosynthetic fibers on pervious concrete properties. Journal of Materials in Civil Engineering, 27 (9), 06014031-1–06014031-6. DOI: 10.1061/(ASCE)MT.1943-5533.0001213.
Katkar, P.M., Patil, C.A., Khude, P.A., Jain, A.M. & Chougule, S.S. (2012). Coir-cement composite. Melliand International, 18 (2), 132–134. URL: https://www.researchgate.net/publication/287047716_Coir-cement_composite.
Kayali, O., Haque, M.N. & Zhu, B. (1999). Drying shrinkage of fibre-reinforced lightweight aggregate concrete containing fly ash. Cement and Concrete Research, (29), 1835–1840. DOI: 10.1016/S0008-8846(99)00179-9.
Bederina, M., Laidoudi, B., Goullieux, A., Khenfer, M.M., Bali, A. & Quéneudec, M. (2009). Effect of the treatment of wood shavings on the physico-mechanical characteristics of wood sand concretes. Construction and Building Materials, (23), 1311–1315. DOI: 10.1016/j.conbuildmat.2008.07.029.
Mungwa, M.S., Jullien, J.-F., Foudjet, A. & Hentges, G. (1999). Experimental study of a composite wood-concrete beam with the INSA-Hilti new flexible shear connector. Construction and Building Materials, (13), 371–382. DOI: 10.1016/S0950-0618(99)00034-3.
Olorunnisola, A.O. (2009). Effects of husk particle size and calcium chloride on strength and sorption properties of coconut husk-cement composites. Industrial crops and products, (29), 495–501. DOI: 10.1016/j.indcrop.2008.09.009.
Taoukil, D., El Bouardi, A., Sick, F., Mimet, A., Ezbakhe, H. & Ajzoul, T. (2013). Moisture content influence on the thermal conductivity and diffusivity of wood-concrete composite. Construction and Building Materials, (48), 104–115. DOI: 10.1016/j.conbuildmat.2013.06.067.
Fu, Q., Yan, L., Ning, T., Wang, B. & Kasal, B. (2020). Interfacial bond behavior between wood chip concrete and engineered timber glued by various adhesives. Construction and Building Materials, (238), 117743. DOI: 10.1016/j.conbuildmat.2019.117743.
Khorami, M. & Ganjian, E. (2011). Comparing flexural behaviour of fibre-cement composites reinforced bagasse: Wheat and eucalyptus. Construction and Building Materials, (25), 3661–3667. DOI: 10.1016/j.conbuildmat.2011.03.052.
Salem, T., Fois, M., Omikrine-Metalssi, O., Manuel, R. & Fen-Chong, T. (2020). Thermal and mechanical performances of cement-based mortars reinforced with vegetable synthetic sponge wastes and silica fume. Construction and Building Materials, (264), 120213. DOI: 10.1016/j.conbuildmat.2020.120213.
Lacoste, C., Bergeret, A., Corn, S. & Lacroix, P. (2018). Sodium alginate adhesives as binders in wood fibers/textile waste fibers biocomposites for building insulation. Carbohydrate Polymers, (184), 1–8. DOI: 10.1016/j.carbpol.2017.12.019.
Subbotina, N., Gorlenko, N., Sarkisov, Y., Naumova, L. & Minakova, T. (2016). Control of Structurization Processes in Wood-Cement Systems at Fixed pH. AIP Conference Proceedings, (1698), 060003-1–060003-6. DOI: 10.1063/1.4937858.
Yagubkin, A.N. (2017). Innovatsionnyi konstruktsionno-teploizolyatsionnyi arbolit s zadannymi svoistvami. BST: byulleten' stroitel'noi tekhniki, 10 (998), 42–43. URL: http://bstmag.ru/article?id=1506.
Bozylev, V.V. & Yagubkin, A.N. (2017). Innovatsionnyi arbolit s zadannymi svoistvami. Problemy sovremennogo betona i zhelezobetona: sb. nauch. tr., (9), 96–112. DOI: 10.23746/2017-9-7.
Bozylev, V.V. & Yagubkin, A.N. (2011). Izuchenie mekhanizma deistviya dobavki Arbel na protsessy nabora prochnosti tsementnoi sostavlyayushchei arbolita. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F, Stroitel'stvo. Prikladnye nauki, (16), 89–96. URL: https://elib.psu.by/bitstream/123456789/711/5/89-96.pdf.
Bozylev, V.V. & Yagubkin, A.N. (2009). K voprosu razrabotki metodiki ekspress-analiza otsenki vliyaniya dobavok na prochnost' arbolita. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F, Stroitel'stvo. Prikladnye nauki, (6), 71–76. URL: https://elib.psu.by/bitstream/123456789/2243/5/71-76.pdf.
Most read articles by the same author(s)
- A. YAGUBKIN, Y., RESEARCH AND APPLICATION OF WOOD-CONCRETE IN WORLD PRACTICE: AN OVERVIEW, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2021)
- A. YAGUBKIN, D. SHABANOV, Y. JINBIN, INFLUENCE OF TEMPERATURE ON THE THERMO-HUMIDITY CONDITIONS OF WALL MATERIALS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2021)
- O. LAZARENKO, A. YAGUBKIN, IMPLEMENTATION OF BIM TECHNOLOGIES IN THE INDUSTRY BUILDING COMPLEX OF THE REPUBLIC OF BELARUS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2020)
- SHABANOV SHABANOV, A. YAGUBKIN, S. VABISHCHVICH, E. BOROVKOVA, E. TRAMBICKIJ, PARAMETERS OF ACOUSTIC EMISSION SIGNALS AND THEIR APPLICATION IN MONITORING THE STATE OF THE CONCRETE STRUCTURE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2019)
- R. BOHUSH, D. GLUKHOV, A. YAGUBKIN, E. SKRIPELYOV, INTEGRATED VIDEO MONITORING SYSTEM TO TEST STRENGTH AND DEFORMABILITY OF BUILDING MATERIALS AND STRUCTURES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2020)
- D. SHABANOV, E. BRIANTSEV, A. YAGUBKIN, I. KRUPENCHIK, S. ZMITROVICH, INSULATION MATERIAL AND THEIR CONVECTIVE PROPERTIES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2019)
- D. SHABANOV, A. YAGUBKIN, V. HVATYNETS, E. TRAMBITSKY, TECHNIQUE OF SUPPORTING THE DEVELOPMENT OF STRUCTURAL DEFECTS IN CEMENT SYSTEMS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2018)
- D. SHABANOV, A. YAGUBKIN, E. BOROVKOVA, E. TRAMBITSKY, METHOD OF ACOUSTIC-EMISSION STUDY OF THE INTERNAL STATE OF CEMENT STONE DURING ITS CHLORIDE CORROSION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2019)
- A. YAGUBKIN, M. GUONA, H. WANG, SHOTCRETES AND MORTARS FOR 3D PRINTERS USING CHINESE INDUSTRIAL WASTE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 3 (2023)
- D. SHABANOV, A. YAGUBKIN, E. BOROVKOVA, E. TRAMBITSKY, MONITORING THE STRUCTURAL STATE OF CEMENT SYSTEMS BY ACOUSTIC EMISSION AND TENZOMETRY SIGNAL PARAMETERS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2019)