A DEFORMATION APPROACH TO CALCULATING THE CALCULATED VALUES OF THE COMPRESSION RESISTANCE OF STONE AND REINFORCED STONE ELEMENTS IN THE FRAMEWORK OF CHECKS OF THE LIMITING STATE OF THE BEARING CAPACITY
Article Sidebar
Main Article Content
Abstract
The article is devoted to the method of calculating the calculated values of compression resistance in the framework of checks of the limiting state of the bearing capacity of short stone and reinforced stone elements, taking into account the physical nonlinearity of their materials. The proposals for graphic representation and analytical description of the calculated deformation diagrams of non-reinforced masonry and masonry with transverse reinforcement in horizontal mortar joints are presented.
On the example of short non-reinforced, reinforced stone elements with transverse and longitudinal reinforcement, taking into account the proposals for deformation diagrams, calculations of the calculated values of compression resistance were carried out. The calculated values are compared with similar values determined according to the current design standards. The results of the calculations and comparison confirmed the possibility of using the proposed approximations of diagrams and calculation methods that take into account the physical nonlinearity of deformation of materials to calculate the calculated values of compression resistance of short stone and reinforced stone elements.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
A. KHATKEVICH, Euphrosyne Polotskaya State University of Polotsk
канд. техн. наук
D. LAZOUSKI, Euphrosyne Polotskaya State University of Polotsk
д-р техн. наук, проф.
D. GLUKHOV, LLC «SoftClub», Minsk
канд. техн. наук, доц.
References
Blokhina, N.S. (2011). Problema ucheta fizicheskoi nelineinosti pri raschete stroitel'nykh konstruktsii [The problem of physical nonlinearity accounting in the building structures calculation]. Vestn. MGSU [Vestnik MGSU], (6), 384–387. (In Russ., abstr. in Engl.).
Blokhina, N.S. (2012). Raschet konstruktsii iz anizotropnykh materialov s primeneniem fizicheskoi nelineinosti. Stroitel'naya mekhanika i raschet sooruzheni, 1(240), 3–5. (In Russ.).
Granovskii, A.V. (2019). Kamennaya kladka: khrupkii ili plastichnyi material? Promyshlennoe i grazhdanskoe stroitel'stvo, (3), 22–28. (In. Russ.). DOI: 10.33622/0869-7019.2019.03.22-28.
Karpenko, N.I., Sokolov, B.S. & Radaikin, O.V. (2019). Proektirovanie betonnykh, zhelezobetonnykh, kamennykh i armokamennykh elementov i konstruktsii s primeneniem diagrammnykh metodov rascheta. Moscow: ASV. (In Russ.).
Sokolov, B.S. & Antakov, A.B. (2019). Analiticheskaya otsenka napryazhenno-deformirovannogo sostoyaniya kamennykh kladok pri szhatii na osnove avtorskoi teorii. Stroitel'nye materialy, (9), 51–55. (In Russ.). DOI: 10.31659/0585-430X-2019-774-9-51-55.
Kabantsev, O.V. (2015). Diskretnaya model' kamennoi kladki v usloviyakh dvukhosnogo napryazhennogo sostoyaniya [Discrete model of masonry under biaxial stresses]. Vestn. Tomskogo gos. arkhitekturno-stroit. un-ta [J. of Construction and Architecture], 4(51), 113–134. (In Russ., abstr. in Engl.).
Lazovskii, D.N. & Khatkevich, A.M. (2022). Deformatsionnyi podkhod k raschetu soprotivleniya szhatiyu armokamennykh elementov [Deformation approach to the calculation of compression resistance of reinforced stone elements]. Vestn. MGSU [Vestnik MGSU], 17(12), 1638–1652. (In. Russ., abstr. in Engl.). DOI: 10.22227/1997-0935.2022.12.1638-1652.
Most read articles by the same author(s)
- D. LAZOUSKI, D. GLUHAU, Y. LAZOUSKI, GENERAL METHOD BASED ON A NONLINEAR DEFORMATION MODELFOR STRENGTH AND DEFORMATIONS ANALYSIS OF ECCENTRICAL COMPRESSED CONCRETE COLUMNS, STRENGTHENED WITH A REINFORCED CONCRETE SECTION ENLARGEMENT, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2021)
- D. LAZOUSKI, E. CHAPARANGANDA, EXPERIMENTAL AND THEORETICAL STUDY OF BENDING REINFORCED CONCRETE ELEMENTS RESTORED AFTER DESTRUCTION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 1 (2023)
- D. LAZOUSKI, D. GLUHAU, Y. LAZOUSKI, MODELING OF THE BEHAVIOR OF REINFORCED CONCRETE ELEMENTS, STRENGTHENED IN THE TENSIONED ZONE, UNDER THE ACTION OF A LONG-TERM LOAD, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2022)
- D. LAZOUSKI, D. GLUHAU, Y. LAZOUSKI, A. HIL, COMPUTATIONAL MODEL OF THE STRESS-STRAIN STATE OF STATICALLY INDETERMINATE REINFORCED CONCRETE STRUCTURES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 14 (2022)
- D. LAZOVSKI, A. KHATKEVICH, INFLUENCE OF THE GRIDS TYPE FOR TRANSVERSE REINFORCEMENT IN HORIZONTAL MORTAR JOINTS ON THE STRESSED-DEFORMED STATE OF SHORT REINFORCED STONE ELEMENTS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2019)
- R. BOHUSH, D. GLUKHOV, A. YAGUBKIN, E. SKRIPELYOV, INTEGRATED VIDEO MONITORING SYSTEM TO TEST STRENGTH AND DEFORMABILITY OF BUILDING MATERIALS AND STRUCTURES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2020)
- D. GLUKHOV, Т. GLUKHOVA, A. ANDRIEVSKY, A. YANUSHONOK, THE ALGORITHM OF CALCULATION OF THE COMMODITY-TRANSPORT WORK THE MAIN GAS PIPELINE IN THE FRAMEWORK OF NON-ISOTHERMAL STEAD, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2018)
- D. GLUKHOV, R. BOGUSH, Е. LAZOVSKY, T. GLUKHOVA, PROBABILITY ANALYSIS OF THE STRUCTURAL REINFORCED CONCRETE ELEMENT, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- D. LAZOVSKI, A. KHATKEVICH, CALCULATION OF RESISTANCE TO COMPRESSION OF MASONRY AND REINFORCED MASONRY ELEMENTS TAKING INTO ACCOUNT PHYSICAL NON-LINEARITY, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- A. KHATKEVICH, D. LAZOUSKI, D. GLUKHOV, A DEFORMATION APPROACH TO MODELING THE STRESS-STRAIN STATE OF COMPRESSED BRICKWORK ELEMENTS REINFORCED UNDER LOAD WITH A REINFORCED CONCRETE CAGE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 3 (2023)