ORGANIZATIONAL AND TECHNOLOGICAL SOLUTIONS FOR THE DEVELOPMENT OF THE PRODUCTION BASE OF INDUSTRIAL HOUSING CONSTRUCTION
Article Sidebar
Main Article Content
Abstract
The article proposes an approach to improve the technological level of production on the basis of systematization of the main tasks and solutions of technical re-equipment of precast construction plants. The principle of realization of the proposed system approach is presented in the form of a flowchart. The proposed algorithm demonstrates the practical importance of taking into account the interrelation of construction and production processes for technical re-equipment without stopping the main production and reducing the duration of construction and installation works. Solutions for increasing the production capacity of lines pallet circulation and compensating for the increasing demand for concrete mix while increasing the productivity of the lines are presented. For technological lines circulation of pallet the efficiency of the organization of processes exceeding the directive schedule at the posts not connected with the main flow and with the individual schedule of work is substantiated. The functionality of local mortar-concrete unit of block-modular layout in the span is shown to increase productivity and rhythmicity of work of molding stations.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Gurinovich, V.Yu., Leonovich, S.N. & Pozdnyakov, D.A. (2023). Proizvodstvennyi potentsial bazy industrial'nogo domostroeniya Respubliki Belarus' [Production Potential of the Prefabricated Construction Base in the Republic of Belarus]. Vestn. BrGTU [Vestnik of Brest State Technical University], 1(130), 3–6. DOI: 10.36773/1818-1112-2023-130-1-3-6. (In Russ., abstr. in Engl.).
Li, X., Li, Z. & Wu, G. (2018). Lean precast production system based on the CONWIP method. KSCE Journal of Civil Engineering, (22), 2167–2177. DOI: 10.1007/s12205-017-2009-4.
Yuan, Z., Qiao, Y., Guo, Y., Wang, Y., Chen, C. & Wang, W. (2020). Research on Lean Planning and Optimization for Precast Component Production Based on Discrete Event Simulation. Advances in Civil Engineering, 2020(2). DOI: 10.1155/2020/8814914.
Wang, Z., Hu, H. & Zhou, W. (2017). RFID enabled knowledge-based precast construction supply chain, computer-aided civil and infrastructure, Engineering. Computer-Aided Civil and Infrastructure Engineering, (32), 499–514. DOI: 10.1111/mice.12254.
Liu, Z., Liu, Zh., Liu, M. & Wang, J. (2021). Optimization of Flow Shop Scheduling in Precast Concrete Component Production via Mixed-Integer Linear Programming. Advances in Civil Engineering, 2021(1). DOI: 10.1155/2021/6637248.
Liu, Zh., Zhang, Y. & Li, M. (2014). Integrated scheduling of ready-mixed concrete production and delivery. Automation in Construction, (48), 31–43. DOI: 10.1016/j.autcon.2014.08.004.
Hong, W.-К., Lee, G., Lee, S. & Kim, S. (2014). Algorithms for in-situ production layout of composite precast concrete members. Automation in Construction, (41), 50–59. DOI: 10.1016/j.autcon.2014.02.005.
Granik, Yu.G. & Poltavtsev, S.I. (1989). Rekonstruktsiya i tekhnicheskoe perevooruzhenie predpriyatii polnosbornogo domostroeniya. Moscow: Stroiizdat. (In Russ.).
Shveiko, N.V. (1989). Ekonomicheskoe obosnovanie rekonstruktsii i tekhnicheskogo perevooruzheniya deistvuyushchikh predpriyatii. Moscow: Stroiizdat. (In Russ.).
Gusev, B.V. (2015). Avtomatizirovannye tekhnologicheskie linii po proizvodstvu sbornogo zhelezobetona. Izhevsk: KIT. (In Russ.).
Leonovich, S.N. & Gurinovich, V.Yu. (2019). Tekhnologicheskoe proektirovanie rekonstruktsii deistvuyushchikh zavodov KPD: problemy i resheniya. In V.F. Zverev (Eds.) & S.M. Koleda (Eds.) Problemy sovremennogo stroitel'stva: materialy Mezhdunar. nauch-tekhn konf, Minsk, 28 maya 2019 g. (379–395). Minsk: BNTU. (In Russ.).
Ishchenko, A.S., Donenko, V.I. & Marchenko, M.P. (2019). Osoblivostі formuvannya viboru organіzatsіino-tekhnologіchnikh rіshen' rekonstruktsіi dіyuchikh promislovikh pіdpriemstv [Peculiarities of the formation of the selection for reconstruction of operating industrial enterprises]. Vіsn. Pridnіpr. derzh. akad. budіvnitstva ta arkhіtekturi [Bulletin of the Dnieper State Academy of Construction and Architecture], (5), 257–258. DOI: 10.308.38/J.BPSACEA.2312.221019.38.520. (In Ukrainian, abstr. in Russ. and Engl.).
Khalili, A. & Chua, D.K. (2014). Integrated prefabrication configuration and component grouping for resource optimization of precast production. Journal of Construction Engineering and Management, 140(2). DOI: 10.1061/(ASCE)CO.1943-7862.0000798.
Stefanov, B.V. & Antonenko, G.Ya. (1965). Organizatsiya tekhnologicheskikh protsessov na zavodakh sbornogo zhelezobetona. Kiev: Budivel'nik. (In Russ.).
Most read articles by the same author(s)
- E. SADOVSKAYA, S. LEONOVICH, N. BUDREVICH, PRACTICAL TESTING OF A MULTIPARAMETER METHOD FOR ASSESSING THE QUALITY OF FIBER CONCRETE ON A CONSTRUCTION SITE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2022)
- E. SADOVSKAYA, S. LEONOVICH, RELATIONSHIP OF THE STRESS-INTENSITY COEFFICIENT AT NORMAL SEPARATION AND THE STRENGTH IN TENSION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2022)
- V. GURINOVICH, S. LEONOVICH, D. POZDNYAKOV, TRENDS AND DIRECTIONS OF DEVELOPMENT OF PREFABRICATED CONSTRUCTION IN THE WORLD AND DOMESTIC PRACTICE OF CIVIL CONSTRUCTION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 1 (2023)
- V. MALYUK, V. MALYUK, S. LEONOVICH, A. KOLODEY, DESIGN AND TECHNOLOGY OF DURABLE CONCRETE FOR SEA PORT AND TRANSPORT STRUCTURES IN CONDITIONS OF FROST EXPOSURE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 1 (2023)
- S. LEONOVICH, E. SHALY, D. LITVINOVSKY, A. STEPANOVA, A. ZHURAVSKAYA, V. MALYUK, PENETRATION OF CHLORIDES INTO CONCRETE: ANALYSIS OF EXPERIMENTAL STUDIES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 14 (2022)
- X. WANG, H. YU, E. SADOVSKAYA, S. KOVSHAR, S. LEONOVICH, COMPARATIVE STUDY ON THE APPLICABILITY OF NON-METALLIC NANOFIBERS AND REED FIBERS IN CONCRETE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 1 (2024)
- S. LEONOVICH, I. PEREDKOV, THE IMPROVED CROSS-REVERSING SYSTEM OF MONOLITHIC REINFORCED CONCRETE PLATES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2017)