THE INFLUENCE OF CHANGES IN THE SPECIFIC HEAT CAPACITY AND THERMAL CONDUCTIVITY OF CONCRETE ON THE ACCURACY OF THE DEVELOPMENT OF MATHEMATICAL MODELS OF ITS HARDENING IN THERMAL TECHNOLOGY INSTALLATIONS
Article Sidebar
Main Article Content
Abstract
Based on the analysis of literary sources and our own research, the limits of changes in the specific heat capacity and thermal conductivity of concrete during their heat treatment in thermal technology installations have been determined. The influence of the temperature maintained during the heat treatment and the degree of hydration achieved as a result of heating on the values of these thermophysical parameters has been established. The conclusion is made about the determining effect of changes in the thermal conductivity of concrete during its heat treatment (compared with the specific heat capacity) on the results of analytical and numerical calculations of heat treatment modes.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Fedosov, S.V., Bobylev, V.I., Ibragimov, A.M., Kozlova, V.K. & Sokolov, A.M. (2011). Modelirovanie nabora prochnosti betonom pri gidratatsii tsementa. Stroitel'nye materialy, (11), 38–41. (In Russ.).
Babitskii, V.V., Semenyuk, S.D. & Bibik, M.S. (2009). Prognozirovanie kharakteristik tverdeyushchego tyazhelogo betona. In Resursoekonomnii materiali, konstruktsii, budivli ta sporudi: zbirnik naukovikh prats'. Vip. 18, (3–12). Rivne: NUVGP. (In Russ., abstr. in Engl.).
Gromov, Yu.Yu., Ivanova, O.G., Lagutin, A.V. & Lutkhon, Т. (2001). Matematicheskaya model' tverdeniya betona v usloviyakh teplovoi obrabotki zavodov ZhBI. Vestn. TGU, 6(3), 344–345. (In Russ.).
Ge, Zh. (2005). Predicting temperature and strength development of the field concrete. Iowa State University Digital Repository. Civil, Construction and Environmental Engineering. DOI: 10.31274/rtd-180813-15373.
Mar'yamov, N.B. (1970). Teplovaya obrabotka izdelii na zavodakh sbornogo zhelezobetona (protsessy i ustanovki). Moscow: Stroiizdat. (In Russ.).
Sukhodeev, N.V. & Babitskii, V.V. (2009). Metodika proektirovaniya sostava betona [Technique of concrete structure designing]. Vestn. Belorus.-Ros. un-ta, 2(23), 167–176. (In Russ., abstr. in Engl.).
Bibik, M.S. & Babitskii, V.V. (2009). Raschet energosberegayushchikh rezhimov teplovoi obrabotki betonnykh i zhelezobetonnykh izdelii. Keramika: nauka i zhizn', (3), 17–26. (In Russ.).
Bibik, M.S., Sukhodoeva, N.V. & Babitskii, V.V. (2009). K vozmozhnosti proektirovaniya rezhima teplovoi obrabotki betona v yamnykh proparochnykh kamerakh. Stroit. nauka i tekhnika, (2), 58–63. (In Russ.).
Bibik, M.S. & Babitskii, V.V. (2010). Ob energosberegayushchikh rezhimakh teplovoi obrabotki betonnykh i zhelezobetonnykh izdelii. Stroitel'naya nauka i tekhnika, (4), 55–59. (In Russ.).
Dvorkin, O.L. (2003). Proektirovanie sostavov betona (osnovy teorii i metodologii). Rovno: UDUVGP. (In Russ.).
Mchedlov-Petrosyan, O.P. (1971). Khimiya neorganicheskikh stroitel'nykh materialov. Moscow: Stroiizdat. (In Russ.).
Zasedatelev, I.B. & Shifrin, S.A. (1976). K inetika gidratatsii tsementa pri temperaturnom vozdeistvii na beton. Beton i zhelezobeton, (12), 25–26. (In Russ.).
Brunauer, S. & Kantro, D.L. (1969). Gidratatsiya trekhkal'tsievogo silikata i β-dvukhkal'tsievogo silikata v temperaturnom intervale 5–50 °C. In Khimiya tsementov (214–232). Moscow: Izd. lit. po stroitel'stvu. (In Russ.).
Zaporozhets, I.D. Okorokov, S.D. & Pariiskii, A.A. Teplovydelenie betona. Leningrad: Stroiizdat. (In Russ.).
Khan, A.A., Cook, W.D. & Mitchell, D. (2002). Thermal properties and transient analysis of structural members during hydration. ACI Materials Journal, 95(3), 293–302.
Kim, K.H., Jeon, S.E., Kim, J.K. & Yang, S. (2003). An experimental study on thermal conductivity of concrete. Cement and Concrete Research, 33(3), 363–371. DOI: 10.1016/S0008-8846(02)00965-1.
De Schutter, G. & Taerwe, L. (1995). General hydration model for Portland cement and blast furnace slag cement. Cement and Concrete Research, 25(3), 593–604.
Adamtsevich, A.O., Pashkevich, S.A. & Pustovgar, A.P. (2013). Ispol'zovanie kalorimetrii dlya prognozirovaniya rosta prochnosti tsementnykh sistem uskorennogo tverdeniya [Application of calorimetry forprognosticating strength increase of fast-curing cement systems]. Inzhener.-stroit. zhurn. [Magazine of Civil Engineering], (3), 36–42. (In Russ., abstr. in Engl.).
Oh, B.H. & Cha, S.W. (2002). Nonlinear analysis of temperature and moisture distributions in early-age concrete structures based on degree of hydration. ACI Materials Journal, 100(5), 361–370.
Schindler, A.K. & Folliard, K.J. (2005). Heat of hydration models for cementitious materials. ACI Materials Journal, 102(1), 24–33.
Bleshchik, N.P., Prat'ko, N.S. & Ryskin, M.N. (1997). Matematicheskie modeli kinetiki gidratatsii tsementa. In Inzhenernye problemy sovremennogo betona i zhelezobetona: Materialy III Mezhdunar. konf. T. 2 (25–36). Minsk. (In Russ.).
Pane, I. & Hansen, W. (2002). Concrete hydration and mechanical properties under nonisothermal conditions. ACI Materials Journal, 99(6), 534–542.
Riding, K.A., Poole, J.L., Folliard, K.J., Juenger, M.C.G. & Schindler, A.K. (2012). Modeling Hydration of Cementitious Systems. ACI Materials Journal, 102(1), 24–33.
Schindler, A.K. & Folliard, K.J. (2006). Heat of Hydration Models for Cementitious Materials. ACI Materials Journal, 102(1), 24–33.
De Schutter, G. & Taerwe, L. (1996). Degree of Hydration-Based Description of Mechanical Properties of Early-Age Concrete. Materials and Structures, 29(7), 335–344.
Sizov, V.P. (1979). Proektirovanie sostavov tyazhelogo betona. Moscow: Stroiizdat.
Niyakovskii, A.M. (2018). Razrabotka matematicheskoi modeli protsessa tverdeniya betona na osnove trekhmernogo uravneniya teploprovodnosti [Development of a Concrete Hardening Process Mathematical Model Based on a Three-dimensional Heat Equation]. Vestn. Polots. gos. un-ta. Ser. F, Str-vo. Priklad. nauki [Vestnik of Polotsk State University. Part F. Constructions. Applied sciences], (16), 72–79. (In Russ., abstr. in Engl.).
Niyakovskii, A.M., Romanyuk, V.N., Chichko, A.N. & Yatskevich, Yu.V. (2019). Verifikatsiya nestatsionarnoi matematicheskoi modeli tverdeniya betona v teplotekhnologicheskikh ustanovkakh [Verification оf Non-Stationary Mathematical Model оf Concrete Hardening in Thermal Technological Installations]. Nauka i tekhnika, 18(2), 137–145. DOI: 10.21122/2227-1031-2019-18-2-137-145 (In Russ.).
Niyakovskii, A.M., Romanyuk, V.N., Chichko, A.N. & Yatskevich, Yu.V. (2019). Nestatsionarnaya model' protsessa gidratatsii zhelezobetonnogo izdeliya, nakhodyashchegosya v programmno-nagrevaemoi srede [Unsteady Model of the Hydration Process of a Reinforced Concrete Product at Software-Controlled Heating]. Dokl. Nats. akad. nauk Belarusi, 63(4), 496–505. DOI: 10.29235/1561-8323-2019-63-4-496-505 (In Russ.).
Most read articles by the same author(s)
- V. YAKAULEVA, A. NIYAKOVSKII, E. DOROFEEV, A. NIYAKOVSKI, INVESTIGATION OF THE INFLUENCE OF THE STANDARD HOURLY WATER CONSUMPTION ON THE FINANCIAL COSTS OF CREATING THE SUPPLY PIPELINES OF THE HOT WATER SUPPLY SYSTEM OF AN APARTMENT BUILDING, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2021)
- A. NIYAKOVSKII, D. LARINA, A. BATENKOVA, THE CHOICE OF A SOURCE OF THERMAL ENERGY IN HEAT SUPPLY SYSTEMS, TAKING INTO ACCOUNT THE REQUIREMENTS OF DECARBONIZATION AND ENERGY CONSERVATION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 1 (2023)
- V. ROMANIUK, A. NIYAKOVSKII, N. STRUTSKY, PREDICTIVE ANALYTICS OF THE OBJECTS OF THE GAS DISTRIBUTION SYSTEM OF THE REPUBLIC OF BELARUS: CURRENT STATUS AND PROSPECTS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 3 (2024)