INCREASING THE ANTIFRICTION PROPERTIES OF PLASTIC LUBRICANT BY MODIFYING WITH MICROSIZED ADDITIVES
Article Sidebar
Main Article Content
Abstract
The article presents studies of wear resistance of a sliding friction pair operated with a general-purpose complex lithium grease with the addition of micro-sized components in the form of boron nitride (ITMOL-150N+3% BN). The coefficients of the fourth-degree polynomial are calculated, allowing to calculate the value of mass wear and the friction coefficient at any friction section. It is established that the wear intensity of the sliding friction pair decreases with modification of the plastic complex lithium grease ITMOL-150N with boron nitride particles, and is 4-5 times lower than the traditionally used grease Litol-24.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Vityaz', P.A., Zhornik, V.I., Il'yushchenko, A.F. & Senyut', V.T. (2013). Nanoalmazy detonatsionnogo sinteza: poluchenie i primenenie. Minsk: Belarus. navuka. (In Russ.).
Alimova, Z.Kh. & Makhamadzhanov, M.I. (2021). Ekologicheskaya bezopasnost' pri ispol'zovanii goryuche-smazochnykh materialov [Environmental safety in use flammable lubricants]. Teoriya i praktika sovremennoi nauki, 11(77), 12–16. (In Russ., abstr. in Engl.).
Alimova, Z.Kh. (2020). Puti uluchsheniya svoistv smazochnykh materialov, primenyaemykh v transportnykh sredstvakh. Tashkent: Vneshinvestprom. (In Russ.).
Krizhevskaya, E.T., Sentyurikhina, M.I., Bartko, R.V. & Danilov, A.M. (2020). Plastichnye smazki, modifitsirovannye grafenom [Graphene-modified plastic lubricants]. Mir nefteproduktov [World of Petroleum Products], (6), 62–63. (In Russ., abstr. in Engl.).
Ivanov, V.P., Dudan, A.V. & Vigerina, T.V. (2021). Tribotekhnicheskoe modifitsirovanie poverkhnostei uzlov treniya v tekhnike. In: Aktual'nye problemy razvitiya ekonomiki i upravleniya v sovremennykh usloviyakh: sb. materialov IV Mezhdunar. nauch.-prakt. konf., Moskva, 10 noyab. 2021 g. (328–336). Moscow: MEI. (In Russ.).
Zhornik, V.I., Ivakhnik, A.V., Ivakhnik, V.P. & Zapol'skii, A.V. (2018). Struktura i svoistva kompleksnoi sul'fonatkal'tsievoi smazki [Structure and Properties of Complex Sulfonate Calcium Greases]. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and materials], 1(42), 44–50. (In Russ., abstr. in Engl.).
Zhornik, V.I. (2014). Plastichnye smazochnye materialy s binarnoi dispersnoi fazoi dlya tyazhelonagruzhennykh uzlov treniya. In: Nauka – obrazovaniyu, proizvodstvu, ekonomike: materialy 12-i Mezhdunar. nauch.-tekhn. konf.: in 4 vol. Vol. 1 (358). Minsk: BNTU. (In Russ.).
Senyut', V.T., Kovaleva, S.A., Gamzeleva, T.V. & Grigor'eva, T.F. (2016). Issledovanie strukturnykh osobennostei nitrida bora posle mekhanoaktivatsii v attritore i planetarnoi mel'nitse. Khimiya v interesakh ustoichivogo razvitiya, 24(2), 169–175. (In Russ.).
Most read articles by the same author(s)
- S. PILIPENKO, PARAMETERS OF THE DEFORMATION CONTAINMENT VOLUME AT THE BACKWARD STROKE OF COLD-DIE-PILGERING AND COLD-ROLLER-PILGERING MILLS WHEN FEEDING THE BILLET IN EITHER POSITIONS OF THE STAND, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- T. VIGERINA, О. SHTEMPEL, V. FRUCKI, DESIGNING OF COMPOSITE MATERIAL ON THE BASIS OF METALWASTE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- M. AGEEV, T. VIGERINA, K. DANKO, S. DOVZHUK, S. CHEGRAY, A. LOPATA, ASSESSMENT OF INFLUENCE OF PARAMETERS OF PROCESS GAS-THERMAL DUSTING OF COVERINGS ON THEIR PROPERTIES BY USING METHODS OF MATHEMATICAL PLANNING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- E. KOT, V. YAROSHEVICH, A. GOLOVNICH, V. IVANOV, ENGINEERING EQUIPMENT AND OPERATING MODES OF LIGHT-FILM OBJECTS ON REGULATED PEDESTRIAN TRANSITIONS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- M. BELOTSERKOVSKY, A. SOSNOVSKY, A. YALOVIK, A. DUDAN, ESTIMATION OF USE THE HYPERSONIC METALLIZATION TO RESTORATION OF HYDRAULIC SYSTEMS ELEMENTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- V. IVANOV, V. DRONCHЕNKО, MODELLING OF A SHOCK WAVE DEVELOPMENT PROCESS ARISING AT OPERATION OF PNEUMATIC EMITTER, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- V. ZHORNIK, S. KOVALIOVA, N. KHOMICH, T. GRIGORIEVA, A. DUDAN, S. GRIGORIEV, FORMATION OF COMPOSITE POWDERS OF SYSTEMS Fe–SiC AND Fe–B4C BY MECHANICAL SYNTHESIS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- S. PILIPENKO, ANALYSIS OF THE INFLUENCE OF SEPARATE CALIBRATION PARAMETERS OF THE WORKING TOOL OF THE COLD ROLLING PIPES MILLS ON THE Q-FACTOR DISTRIBUTION ALONG THE DEFORMATION CONE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- V. NICOLAICHUK, A. DUDAN, E. KOZHEVNIKOVA, L. LOPATA, DETERMINING THE OPTIMAL TIMING OF THE ELECTROCONTACT SINTERING PROCESS FOR POWDER COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- Y. VOLKOV, V. LOPATA, T. VIGERINA, M. AGEEV, RESTORATION OF TREES DIESEL-GENERATORS ELECTROCONTACT SINTERING DISCRETE COATING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)