MODIFICATION OF OIL BITUMEN WITH POLYETHYLENE PRODUCTS
Article Sidebar
Main Article Content
Abstract
The article presents the results of studies on the use of polyolephilic polymers such as high-density polyethylene film, PV-200 polyethylene wax, low-molecular-weight polyethylene, and polyethylene foam in the production of bitumen materials. It was found that the use of polyolefin polymers such as polyethylene foam and polyethylene wax dissolved in waste industrial oil improves the heat and frost resistance of bitumen while expanding its plasticity range. The studies confirmed the potential for recycling polyethylene products in the production of bitumen materials for non-critical construction projects.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Герман А.М., Ширкунов А.С., Рябов В.Г. Применение полиэтилена и стирол-бутадиенстирольных модификаторов для производства дорожных полимерно-битумных вяжущих на базе неокисленных высококипящих нефтепродуктов // Вестник ПНИПУ. Химическая технология и биотехнология. – 2021. – № 4. – С. 55–69.
A comparative life cycle assessment of hot mixes asphalt containing bituminous binder modified with waste and virgin pol-ymers / J. Santos, V. Cerezo, K. Soudani et al. // Procedia CIRP. – 2018. – № 69. – P. 194–199. DOI: 10.1016/j.procir.2017.11.046
A review of the fundamentals of polymer-modified asphalts: Asphalt /polymer interactions and principles of compatibility / G. Polacco, S. Filippi, F. Merusi et al. // Advances in Colloid and Interface Science. – 2015. – № 224 – P. 72–112. DOI: 10.1016/j.cis.2015.07.010
Phase field simulation and microscopic observation of phase separation and thermal stability of polymer modified asphalt / M. Liang, X. Xin, W. Fan et al. // Construction and Building Materials. – 2019. – № 204. – P. 132–143. DOI: 10.1016/j.conbuildmat.2019.01.180
Phase behavior and hot storage characteristics of asphalt modified with various polyethylene: Experimental and numerical characterizations / M. Liang, X. Xin, W. Fan et al. // Construction and Building Materials. – 2019. – № 203. – P. 608–620. DOI: 10.1016/j.conbuildmat.2019.01.095
Nouali М., Ghorbel Е., Derriche Z. Phase separation and thermal degradation of plastic bag waste modified bitumen during high temperature storage // Construction and Building Materials. – 2020. – № 239. – 117872. DOI: 10.1016/j.conbuildmat.2019.117872
Evaluation of the effect of processed plastic additives on the properties of paving grade bitumen / M. Gajewski, R. Horodecka, W. Bañkowski et al. // Roads and Bridges. – 2023. – № 22(03). – Р. 287–307. DOI: 10.7409/rabdim.023.015
Коваленко П.В. Исследование свойств битумно-полимерных композиций // Вестник Полоцкого государственного университета. Серия B, Прикладные науки. Промышленность. – 2008. – № 2. –С. 128–133.
Модифицирование битумных вяжущих отходами нефтехимии / Ю.А. Булавка, К.А. Гришанин, В.С. Слепенков и др. // Вестник Полоцкого государственного университета. Серия В, Промышленность. Прикладные науки. – 2023. – № 2(48). – С. 75–79. DOI: 10.52928/2070-1616-2023-48-2-75-79
Lebedzeva T.I., Bulauka Y.A. Polymer-modifier for the road bitumen manufacture of the fourth generation // Topical Issues of Rational Use of Natural Resources. – 2020. – Vol. 2. – P. 546-552. DOI: 10.1201/9781003014638-10
Нефтяные композиции на основе низкомолекулярного полиэтилена / Ю.А. Булавка, С.В. Покровская, В.И. Сыцевич и др. // Наука и инновации. – 2017. – Т. 6, № 172. – С. 31–33.
Булавка Ю.А., Петровская Ю.С., Ширабордина В.С. Современные альтернативные направления промышленного использования низкомолекулярного полиэтилена // Вестник Полоцкого государственного университета. Серия B, Промышленность. Прикладные науки. – 2017. – № 11. – С. 103–110.
Most read articles by the same author(s)
- Y. BULAUKA, D. ADAMOVITCH, IMPROVEMENT OF THE PROCEDURE OF PROFESSIONAL SELECTION OF PERSONNEL FOR WORK AT HAZARDOUS PRODUCTION FACILITIES OF THE OIL REFINING INDUSTRY, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- Y. BULAUKA, K. GRISHANIN, V. SLEPENKOV, E. STELMAKH, MODIFICATION OF BITUMINOUS BINDERS WITH PETROCHEMISTRY WASTE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2023)
- K. KOZHEMYATOV, Y. BULAUKA, DIRECTIONS TO IMPROVE INDUSTRIAL SAFETY OF EQUIPMENT OPERATING UNDER EXCESSIVE PRESSURE ON OIL REFINING ENTERPRISE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- Y. BULAUKA, Y. VISHNYAKOVA, V. LIAKHOVICH, H. MASKALENKA, PRODUCTION OF BITUMINOUS MATERIALS ON THE BASIS OF NEUTRALIZED ACID TARS OF PETROCHEMICAL ENTERPRISES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- V. IVANOV, Y. BULAUKA, P. PLISKIN, MODELING OF THE CHEMICAL-TECHNOLOGICAL PROCESS OF EXTRACTION OF DIMETHYL DISULPHIDE FROM BY-PRODUCTS OF SECONDARY PROCESSES OF OIL REFINING OF BELARUSIAN OIL REFINERY, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2026)
- LI QI, Y. BULAUKA, OIL POLLUTION CONTROL TECHNOLOGIES IN THE PEOPLE'S REPUBLIC OF CHINA, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2026)
- S. JAKUBOWSKI, Y. BULAUKA, А. SHVEDOV, M. NESTEROVICH, THE TECHNOLOGY OF RECYCLING ACID TAR OF PRODUCTION OF SULFONATE ADDITIVES INTO BITUMINOUS MATERIALS BY THERMOOXIDATION METHOD, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- I. KUZMENOK, Y. BULAUKA, DRIVERS' LACK OF AWARENESS OF SAFETY MEASURES AS A RISK FACTOR TO LIFE AND HEALTH WHEN HANDLING PETROLEUM PRODUCTS AT GAS STATIONS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2026)
- P. KOVALЕNKO, Y. BULAUKA, MODERN TECHNOLOGIES FOR PACKAGING AND TRANSPORTING OIL BITUMEN, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2026)
- S. VELIKOV, S. POKROVSKAYA, Y. BULAUKA, KINETIC REGULARITIES OF HYDRODESULFURIZATION OF DIESEL FUEL ATTHE L-24/6, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2014)