INCREASED WEAR RESISTANCE OF PARTS HEAVY-LOADED FRICTION ASSEMBLY OF VEHICLES
Article Sidebar
Main Article Content
Abstract
The paper shows that in order to increase the service life of parts of heavily loaded friction units of cars, it is recommended to use complex lubricants: lithium grease using a structuring and pre-processing additive in the form of a package of nanoscale diamonds and calcium sulfate with fluoroplast additives and a viscous additive. The tests are modeled on the basis of the operating conditions of the axle – bushing balancer friction pairs operated with contact pressure 1.5–6.0 MPa. It is established that for the bronze–steel friction pair under conditions of boundary friction at the specified contact pressure, the maximum wear resistance of the samples at the stages of run-in and established friction is achieved by using a complex calcium sulfate grease with fluoroplast additives and a viscous additive. The use of a complex lithium lubricant with nanoscale diamonds reduces the run-in period in all these modes and is effective at a specific load not exceeding 3 MPa.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Leontʹyev, L.B., Leontʹyev, A.L. & Makarov, V.N. (2014). Sistemnyy analiz tekhnologii formirovaniya iznosostoykikh pokrytiy na poverkhnostyakh treniya detaley [System analysis of technology for the formation of wear-resistant coatings on friction surfaces of parts]. Fundamentalʹnyye issledovaniya [Fundamental research], (12, part 4), 729–734. (In Russ., abstr. in Engl.).
Vityazʹ, P.A., Zhornik, V.I., Kukareko, V.A., Komarov, A.I. & Senyutʹ, V.T. (2011). Modifitsirovaniye materialov pokrytiy nanorazmernymi almazosoderzhashchimi dobavkami [Modification of coating materials with nanosized diamond-containing additives]. Minsk: Minsk: Bielaruskaja Navuka. (In Russ.).
Vityazʹ, P.A., Ilʹyushchenko, A.F. & Zhornik, V.I. (2013). Nanoalmazy detonatsionnogo sinteza: polucheniye i primeneniye [Nanodiamonds of detonation synthesis: production and application]. In Р.А. Vityazʹ (Eds.). Minsk: Minsk: Bielaruskaja Navuka. (In Russ.).
Most read articles by the same author(s)
- V. ZHORNIK, M. BELOTSERKOVSKY, A. YALOVIK, A. DUDAN, SELECTING THE COMPOSITION OF THE APPLICATION COMPOSITION AND DETERMINING THE REGIMES OF TRIBOMECHANICAL PROCESSING OF STEEL GAS-THERMAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. FRUCKI, T. VIGERINA, V. KOSTRITSKI, RESTORATION OF TYPE “SHAFT” PARTS BY THE COMBINED EFFECTS OF THE COATING MATERIAL, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. ZHORNIK, A. IVAKHNIK, A. DUDAN, A. HUSHCHA, STRUCTURE AND PROPERTIES OF THE CALCIUM SULFONATE BASED GREASE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- О. MIKOSYANCHIK, В. LYASHENKO, N. KUZІN, A. DUDAN, SELECTION OF THE OPTIMAL PARAMETERS OF THE SURFACE LAYERS OF THE STRUCTURE TRIBOSYSTEMS TAKING INTO ACCOUNT THE MECHANICAL PROPERTIES OF THE GRADIENT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. KOSTRITSKI, A. LISOVSKI, A. DUDAN, CREATING MICRORELIEF ON THE INNER SURFACE OF THE CYLINDER LINER BY LASER RADIATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- T. VIGERINA, О. SHTEMPEL, V. FRUCKI, DESIGNING OF COMPOSITE MATERIAL ON THE BASIS OF METALWASTE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- M. AGEEV, T. VIGERINA, K. DANKO, S. DOVZHUK, S. CHEGRAY, A. LOPATA, ASSESSMENT OF INFLUENCE OF PARAMETERS OF PROCESS GAS-THERMAL DUSTING OF COVERINGS ON THEIR PROPERTIES BY USING METHODS OF MATHEMATICAL PLANNING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. ZHORNIK, S. KOVALIOVA, N. KHOMICH, T. GRIGORIEVA, A. DUDAN, S. GRIGORIEV, FORMATION OF COMPOSITE POWDERS OF SYSTEMS Fe–SiC AND Fe–B4C BY MECHANICAL SYNTHESIS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- D. KAPSKIJ, E. KOT, O. SHCHERBAK, T. VIGERINA, STUDIES OF PARTICIPATION FEATURES IN THE TRAFFIC OF PEDESTRIANS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- M. BELOTSERKOVSKY, А. SOSNOVSKY, D. TRUSOV, A. YALOVIK, A. DUDAN, PECULIARITIES OF RESTORING DETAILS BY METHODS OF METALIZATION USING COMPOSITE POWDER WIRE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)