INCREASED WEAR RESISTANCE OF PARTS HEAVY-LOADED FRICTION ASSEMBLY OF VEHICLES
Article Sidebar
Main Article Content
Abstract
The paper shows that in order to increase the service life of parts of heavily loaded friction units of cars, it is recommended to use complex lubricants: lithium grease using a structuring and pre-processing additive in the form of a package of nanoscale diamonds and calcium sulfate with fluoroplast additives and a viscous additive. The tests are modeled on the basis of the operating conditions of the axle – bushing balancer friction pairs operated with contact pressure 1.5–6.0 MPa. It is established that for the bronze–steel friction pair under conditions of boundary friction at the specified contact pressure, the maximum wear resistance of the samples at the stages of run-in and established friction is achieved by using a complex calcium sulfate grease with fluoroplast additives and a viscous additive. The use of a complex lithium lubricant with nanoscale diamonds reduces the run-in period in all these modes and is effective at a specific load not exceeding 3 MPa.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Leontʹyev, L.B., Leontʹyev, A.L. & Makarov, V.N. (2014). Sistemnyy analiz tekhnologii formirovaniya iznosostoykikh pokrytiy na poverkhnostyakh treniya detaley [System analysis of technology for the formation of wear-resistant coatings on friction surfaces of parts]. Fundamentalʹnyye issledovaniya [Fundamental research], (12, part 4), 729–734. (In Russ., abstr. in Engl.).
Vityazʹ, P.A., Zhornik, V.I., Kukareko, V.A., Komarov, A.I. & Senyutʹ, V.T. (2011). Modifitsirovaniye materialov pokrytiy nanorazmernymi almazosoderzhashchimi dobavkami [Modification of coating materials with nanosized diamond-containing additives]. Minsk: Minsk: Bielaruskaja Navuka. (In Russ.).
Vityazʹ, P.A., Ilʹyushchenko, A.F. & Zhornik, V.I. (2013). Nanoalmazy detonatsionnogo sinteza: polucheniye i primeneniye [Nanodiamonds of detonation synthesis: production and application]. In Р.А. Vityazʹ (Eds.). Minsk: Minsk: Bielaruskaja Navuka. (In Russ.).
Most read articles by the same author(s)
- Y. VOLKOV, V. LOPATA, T. VIGERINA, M. AGEEV, RESTORATION OF TREES DIESEL-GENERATORS ELECTROCONTACT SINTERING DISCRETE COATING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- D. KAPSKIJ, E. KOT, O. SHCHERBAK, T. VIGERINA, STUDIES OF PARTICIPATION FEATURES IN THE TRAFFIC OF PEDESTRIANS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. SENYUT, V. ZHORNIK, A. PARNITSKY, E. MOSUNOV, A. DUDAN, THERMOBARIC SINTERING OF DIAMOND MICROPOWDERS MODIFIED BY SILICON AND TITANIUM, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- A. KASTRUK, A. DUDAN, T. VIGERINA, IMPROVEMENT OF TECHNOLOGY TRAINING OF RECONSTRUCTION OF DETAILS DUE TO THEIR CLASSIFICATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- M. BELOTSERKOVSKY, A. SOSNOVSKY, A. YALOVIK, A. DUDAN, ESTIMATION OF USE THE HYPERSONIC METALLIZATION TO RESTORATION OF HYDRAULIC SYSTEMS ELEMENTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- A. DUDAN, A. HUSHCHA, METHODS AND MEANS TRIBOMODIFITSIROVANIYA FRICTION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- V. NICOLAICHUK, A. DUDAN, E. KOZHEVNIKOVA, L. LOPATA, DETERMINING THE OPTIMAL TIMING OF THE ELECTROCONTACT SINTERING PROCESS FOR POWDER COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- A. KASTRUK, A. DUDAN, T. VIGERINA, RESTORATION OF DETAILS OF CARS TAKING INTO ACCOUNT INFLUENCE OF HEATPHYSICAL AND MECHANICAL PROPERTIES OF MATERIALS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)