KINEMATIC AND TECHNOLOGICAL SUPPORT FOR FORMING THE REGULAR MICRORELIEF OF SPHERICAL SURFACES OF PARTS BY COMBINED CUTTING WITH CUTTING
Article Sidebar
Main Article Content
Abstract
The kinematic features of the processing of spherical surfaces by a rotating tool at a high cutting speed, the formation of a cutting surface and a cut layer, and the angles of the blade in the cutting process are analyzed. The results of experimental studies of the physical characteristics of the cut sheet, microrelief and microhardness of the resulting surface of the component are presented, including after coating with TiN by the ion-plasma method, confirming a decrease in the height of irregularities and an increase in microhardness in comparison with the traditional methods of obtaining spherical surfaces.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Справочник по триботехнике : в 3 т. / под общ. ред. М. Хебды, А.В. Чичинадзе. – М. : Машиностроение, 1989. – Т. 1 : Теоретические основы. – 400 с.
Шнейдер, Ю.Г. Эксплуатационные свойства деталей с регулярным микрорельефом / Ю.Г. Шнейдер. – 2-е изд. перераб. и доп. – Л. : Машиностроение, Ленингр. отд-ние, 1982. – 248 с.
Чистосердов, П.С. Комбинированные инструменты для отделочно-упрочняющей обработки / П.С. Чис-тосердов. – Минск : Беларусь, 1977. – 127 с.
Анализ способов обработки сферических поверхностей / Н.Н. Попок [и др.] // Вестн. Полоц. гос. ун-та. Сер. В, Прикладные науки. Промышленность. – 2006. – № 12. – С. 42–45.
Попок, Н.Н. Ионно-лучевая обработка материалов азотом / Н.Н. Попок, С.В. Дербуш // Оборудова-ние и инструмент для профессионалов : междунар. информ.-техн. журн. – 2009. – № 6. – С. 18–19.
Металлорежущие вращающиеся инструменты и оснастка : каталог Sandvik Coromant, 2015.
Попок, Н.Н. Шероховатость поверхности детали при обработке ротационным инструментом с преры-вистой режущей кромкой / Н.Н. Попок // Машиностроение : сб. – Минск, 1990. – Вып. 15. – С. 18–22.
Most read articles by the same author(s)
- N. POPOK, A. FRIK, ANALYSIS OF THERMOCOUPLES FOR MEASURING TEMPERATURE IN RUBBER MIXERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, M. CHERNEVICH, G. GVOZD, MODEL AND ALGORITHM FOR DESIGNING OF BLOCK-MODULAR CUTTING TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- A. GRIGORCHIK, V. KUKAREKO, M. BELOTSERKOVSKY, A. BELY, THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF SPUTTERING AND ION NITRIDING ON MICROSTRUCTURE AND WEAR RESISTANCE OF GAS-THERMAL COATING OF HIGH CHROMIUM STEEL 95X18, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- N. POPOK, D. LATUSHKIN, Y. MAHAKINSKY, N. PUTEEV, MODELING OF THE TECHNOLOGICAL FACTORS INFLUENCE ON THE PRECISION OF GEARS IN THE TOOTH REGRINDING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- N. POPOK, A. BALYSH, NON-WELDED SEALED FITTINGS FOR SMALL DIAMETER PIPELINES AND TUBING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, I. KUNCEVICH, R. HMELNICKY, V. ANISIMOV, MODELLING OF INFLUENCE OF ROUGHNESS OF THE SPHERICAL SURFACE OF THE PART ON FEED SPEED SELECTION OF THE ROTATING CUTTING TOOL, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- N. POPOK, A. MAKSIMCHUK, S. PORTYANKO, IMPROVING OF FIXING SYSTEM OF CUTTING INSERTS AND CUTTING BLOCKS IN BLOCK-MODULAR CUTTING TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- N. POPOK, I. KUNCEVICH, R. HMELNICKY, V. ANISIMOV, G. GVOZDZ, THE RELATIONSHIP OF ROTATION SPEEDS OF THE TOOL AND WORKPIECE WHEN MACHINING SPHERICAL SURFACES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2016)