INCREASING RESISTANCE OF WELDING JOINTS OF ALUMINUM ALLOYS
Article Sidebar
Main Article Content
Abstract
Some approaches to increase the resistance to corrosion of welding joints of wrought aluminum alloys, for example the resistance to stress corrosion have been considered. It has been researched the resistance to corrosion of butt welding joints obtained by argon shielded welding. It has been proposed to increase the resistance to stress corrosion by using the hard carbon dioxide for forced cooling of metal and fitting the subsequent heat treatment conditions. It has been established the values of resistance to stress corrosion of welding joints obtained as usual conditions as with the use of hard carbon dioxide. It was evaluated the functional connections between tempering conditions and strength of welding joints, that permitted to define the optimal heat treatment conditions to reach the high resistance to stress corrosion.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Технология электрической сварки металлов и сплавов плавлением ; под ред. Б.Е. Патона. – М. : Машиностроение, 1974. – 768 с.
Parmar, K.S. Welding engineering and Technology / K.S. Parmar. – Khanna Publishers, 2005. – 270 p.
Фридляндер, И.Н. Алюминиевые деформируемые конструкционные сплавы / И.Н. Фридляндер. – М. : Металлургия, 1978. – 208 с.
Мондольфо, Л.Ф. Структура и свойства алюминиевых сплавов / Л.Ф. Мондольфо. – М. : Металлургия, 1979. –640 с.
Металловедение алюминия и его сплавов / А.И. Беляев [и др.]. – М. : Металлургия, 1983. – 280 с.
Куликов, В.П. Технология сварки плавлением / В.П. Куликов. – Минcк : Дизайн ПРО, 2001. – 256 с.
Feng, Z. Processes and Mechanisms of Welding Residual Stress and Distortion / Z. Feng. – Woodhead Publishers, 2005. – 343 p.
Пантелеенко, Ф.И. Снижение поверхностных деформаций путем термической обработки в процессе стыковой сварки / Ф.И. Пантелеенко, А. Хейдари Монфаред // Вестник Полоцкого государственного университетаю. Сер. В, Промышленность. Прикладные науки. – 2011. – № 3. – С. 19–26.
Герчикова, Н.С. Тонкая структура и коррозионное растрескивание алюминиевых сплавов / Н.С. Герчикова. – М. : Металлургия, 1982. – 160 с.
Кимкина, С.И. Сопротивление разрушению алюминиевых сплавов / С.И. Кимкина. – М. : Металлургия, 1981. – 280 с.
Most read articles by the same author(s)
- F. PANTELEENKO, M. KARPETS, M. BELOTSERKOVSKY, A. SOSNOVSKY, INFLUENCE OF HYPERSONIC METALLIZATION MODES ON THE ADHESION STRENGTH OF METAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- F. PANTELEENKO, О. В. ШУМОВ, INCREASING QUALITY OF WELDING JOINTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- F. PANTELEENKO, А. SHUMАV, DECREASING DEFORMATION OF WELDING JOINTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- F. PANTELEENKO, O. SHUMАV, SIMULATING DEFORMATION OF WELDING JOINTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- F. PANTELEENKO, A. SHUMAV, INCREASING STRENGTH OF ARC WELDING JOINTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)