THE STUDY OF THE FORMATION OF COATINGS OF PSEUDOPLANES HYPERSONIC METALLIZATION
Article Sidebar
Main Article Content
Abstract
The method of hypersonic metallization aimed at the formation of coatings by simultaneous spraying of dissimilar metals with the formation of pseudo-alloys with high tribotechnical properties is considered. The conditions under which the high quality of pseudo-alloy coatings is ensured are determined.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Инженерия поверхности деталей / под ред. А.Г. Суслова. – М. : Машиностроение, 2008. – 320 с.
Handbook of Thermal Spray Technology ; ed. Joseph R. Davis. – ASM. N.Y, 2004. – 413 p.
Spray forming [Электронный ресурс]. – Режим доступа: https://en.wikipedia.org/wiki/Spray_forming. – Дата доступа: 10.04.2014.
Вигилянская, Н.В. Газотермическое напыление псевдосплавных покрытий / Н.В. Вигилянская, Ю.С. Борисов, И.А. Демьянов // Автоматическая сварка. – 2012. – № 1.– С. 48–55.
Способ получения газотермических покрытий : пат. RU 2063470 / А.Е. Титлянов, А.Г. Радюк, С.И. Педос. – Опубл. 10.07.1996.
Оптимизация методов, материалов и технологий поверхностного упрочнения с использованием способов газотермического напыления / М.А. Белоцерковский [и др.] // Вестн. РГУПС. – Ростов н/Д, 2017. – № 4. – С. 8–15.
Оценка возможности использования гиперзвуковой металлизации при восстановлении элементов гидросистем / М.А. Белоцерковский [и др.] // Вестник Полоцкого государственного университета, Сер. В, Промышленность. Прикладные науки. – 2015. – № 11. – С. 36–42.
Мотяхов, М.Ф. Электродуговая сварка металлов / М.Ф. Мотяхов. – М. : Высш. шк., 1975. – 232 с.
Most read articles by the same author(s)
- F. PANTELEENKO, M. KARPETS, M. BELOTSERKOVSKY, A. SOSNOVSKY, INFLUENCE OF HYPERSONIC METALLIZATION MODES ON THE ADHESION STRENGTH OF METAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- M. BELOTSERKOVSKY, I. TARAN, P. KOT, A. DUDAN, TECHNOLOGY FOR OBTAINING AND TRIBOTECHNICAL CHARACTERISTICS OF OXIDIZED ALUMINUM COATINGS APPLIED TO POLYMERS , Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- M. BELOTSERKOVSKY, ANALYTICAL ASSESSMENT OF NECESSARY PARAMETERS FLAME JET DURING DEPOSITION OF POLYMER COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- V. ZHORNIK, S. KOVALEVA, M. BELOTSERKOVSKY, P. VITYAZ, T. GRIGORYEVA, A. DUDAN, INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- M. BELOTSERKOVSKY, V. ZHORNIK, A. YALOVIK, A. DUDAN, RESTORATION OF SHAFTS BY COVERING WITH COMBINED COATINGS BY THE MEANS OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. ZHORNIK, M. BELOTSERKOVSKY, A. YALOVIK, A. DUDAN, SELECTING THE COMPOSITION OF THE APPLICATION COMPOSITION AND DETERMINING THE REGIMES OF TRIBOMECHANICAL PROCESSING OF STEEL GAS-THERMAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- A. GRIGORCHIK, V. KUKAREKO, M. BELOTSERKOVSKY, A. BELY, THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF SPUTTERING AND ION NITRIDING ON MICROSTRUCTURE AND WEAR RESISTANCE OF GAS-THERMAL COATING OF HIGH CHROMIUM STEEL 95X18, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- M. BELOTSERKOVSKY, А. SOSNOVSKY, D. TRUSOV, A. YALOVIK, A. DUDAN, PECULIARITIES OF RESTORING DETAILS BY METHODS OF METALIZATION USING COMPOSITE POWDER WIRE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- M. BELOTSERKOVSKY, I. SOSNOVSKY, A. KURILYONOK, O. KUZNECHIK, MODELING OF THE PROCESS OF INDUCTION WELDING POWDER SURFACES CONTAINING NANODIMENTIONAL MODIFIERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- M. BELOTSERKOVSKY, A. SOSNOVSKY, D. TRUSSOV, A. YALOVIK, ASSESSMENT OF ALLOWED HEATING TEMPERATURES OF CYLINDRICAL PARTS DURING DEPOSITION OF THE METAL COATING BY HYPERSONIC METALLIZATION USING MAF GAS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)