FEATURES OF COATINGS OF PSEUDOPLANES METHOD OF HYPERSONIC METALLIZATION
Article Sidebar
Main Article Content
Abstract
The features of the formation of pseudo-alloy coatings by hypersonic metallization are investigated. The structure and properties of coatings obtained by simultaneous spraying of wires from martensitic and austenitic steels are studied. The connection between the quality of coatings formed by wires with different melting temperatures, and the ratio of their diameters, as well as the polarity of the wires to the welding current source is established.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Восстановление валов нанесением комбинированных покрытий гиперзвуковой металлизацией / М.А. Белоцерковский [и др.] // Вестник Полоцкого государственного университета. Сер. В, Промышленность. Прикладные науки. – 2017. – № 11. – С. 79–83.
Леонов, В.В. Материаловедение и технология композиционных материалов / В.В. Леонов, О.А. Артемьева, Е.Д. Кравцова ; СГОУВПО «Сибирский федеральный университет». – Красноярск, 2007. – 238 с.
Вигилянская, Н.В. Газотермическое напыление псевдосплавных покрытий / Н.В. Вигилянская, Ю.С. Борисов, И.А. Демьянов // Автоматическая сварка. – 2012. – № 1. – С. 48–55.
Белоцерковский, М.А. Перспективные материалы и технологии : в 2-х т. ; под ред. В.В. Клубовича. Т. 1. Гл. 9 / М.А. Белоцерковский, А.В. Сосновский, Д.И. Трусов // Исследование процесса гиперзвуковой металлизации стальных износо- и коррозионностойких покрытий. – Витебск : УО «ВГТУ», 2017. – С. 127–143.
О природе формирования метастабильной аустенитной структуры при газотермическом напылении высокохромистой стали мартенситного класса 95Х18 / В.А. Кукареко [и др.] // Упрочняющие технологии и покрытия. – 2017. – Т. 13, № 7 (151). – С. 318–322.
Влияние ионно-лучевого азотирования на структурно-фазовое состояние и триботехнические свойства экономичных газотермических покрытий из проволочных сталей различных классов / В.А. Кукареко [и др.] // Трение и износ. – 2013 (34). – № 6. – С. 621–627.
Мотяхов, М.Ф. Электродуговая сварка металлов / М.Ф. Мотяхов. – М. : Высш. шк., 1975. – 232 с.
Most read articles by the same author(s)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- V. ZHORNIK, S. KOVALEVA, M. BELOTSERKOVSKY, P. VITYAZ, T. GRIGORYEVA, A. DUDAN, INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DUDAN, A. RUTKOVSKY, M. AHIEIEV, V. MIRNENKO, Т. SMYRNOVА, O. RADKO, INCREASING THE STRENGTH PROPERTIES OF SURFACES OF STEEL PARTS VACUUM THERMOCYCLIC NITROGENIZATION IN PLASMA OF PULSATING GREAT DISCHARGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- A. DUDAN, V. LOPATA, V. KALINICHENKO, A. LOPATA, T. IVCHENKO, A. GRISHENKO, USE OF WORKING BODIES WITH DISCRETE COVERINGS TO INCREASE THE EFFICIENCY OF GRAIN CRUSHING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- M. BELOTSERKOVSKY, V. ZHORNIK, A. YALOVIK, A. DUDAN, RESTORATION OF SHAFTS BY COVERING WITH COMBINED COATINGS BY THE MEANS OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. ZHORNIK, M. BELOTSERKOVSKY, A. YALOVIK, A. DUDAN, SELECTING THE COMPOSITION OF THE APPLICATION COMPOSITION AND DETERMINING THE REGIMES OF TRIBOMECHANICAL PROCESSING OF STEEL GAS-THERMAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. ZHORNIK, A. IVAKHNIK, A. DUDAN, A. HUSHCHA, STRUCTURE AND PROPERTIES OF THE CALCIUM SULFONATE BASED GREASE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- V. KOSTRITSKI, A. LISOVSKI, A. DUDAN, CREATING MICRORELIEF ON THE INNER SURFACE OF THE CYLINDER LINER BY LASER RADIATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- О. MIKOSYANCHIK, В. LYASHENKO, N. KUZІN, A. DUDAN, SELECTION OF THE OPTIMAL PARAMETERS OF THE SURFACE LAYERS OF THE STRUCTURE TRIBOSYSTEMS TAKING INTO ACCOUNT THE MECHANICAL PROPERTIES OF THE GRADIENT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- A. GRIGORCHIK, V. KUKAREKO, M. BELOTSERKOVSKY, A. BELY, THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF SPUTTERING AND ION NITRIDING ON MICROSTRUCTURE AND WEAR RESISTANCE OF GAS-THERMAL COATING OF HIGH CHROMIUM STEEL 95X18, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)