WEAR RESISTANCE OF GAS-THERMAL COATINGS FROM COPPER-ALLOYS ON THE BASIS OF COPPER OBTAINED BY HIGH-SPEED METALLIZATION METHOD
Article Sidebar
Main Article Content
Abstract
The structural phase state and tribotechnical properties of gas-thermal coatings from 08G2S, 40Cr13, 95Cr18 steels, as well as coatings from pseudo-alloys 08G2S + BrKMC3-1, 40Cr13 + BrKMC3-1, 95Cr18 + L63, were investigated. It is shown that sprayed pseudo-alloys contain a reduced amount of iron oxides FeO and Fe3O4, which is associated with the enveloping of steel particles by more easily fusible particles of copper alloys during gas thermal spraying. It has been established that coatings from pseudo-alloys 08G2S + BrKMC3-1 and 40Cr13 + BrKMC3-1 have higher wear resistance during friction paired with steel counterbody compared to steel coatings from 08G2S and 40Cr13 steels. In turn, gas-thermal coatings from 08G2S, 40Cr13 and 95Cr18 steels are characterized by higher wear resistance during friction on the counterbody made of brass L63 compared to coatings from pseudo-alloys 08G2S + BrKMC3-1, 40Cr13 + BrKMC3-1, 95Cr18 + L63.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Белоцерковский, М.А. Технологии активированного газопламенного напыления антифрикционных покрытий / М.А. Белоцерковский. – Минск : УП «Технопринт», 2004. – 200 с.
Замена гальванического хромирования на технологию гиперзвуковой металлизации при ремонте деталей узлов трения скольжения / П.А. Витязь [и др.] // Ремонт, восстановление, модернизация. – 2010. – № 10. – С. 2–5.
Калюкова, Е.Н. Свойства металлов и их соединений : учеб. пособие / Е.Н. Калюкова. – Ульяновск : УлГТУ, 2009. – 156 с.
О природе формирования метастабильной аустенитной структуры при газотермическом напылении высокохромистой стали мартенситного класса 95Х18 / В.А. Кукареко [и др.] // Упрочняющие технологии и покрытия. – М., 2017. – Т.13. – №7(151). – С. 318–322.
Кукареко, В.А. Деформационно-активированное мартенситное превращение в газотермических покрытиях из высокохромистых сталей при сухом трении / В.А. Кукареко, М.А. Белоцерковский, А.Н. Григорчик // ПОЛИКОМТРИБ-2015 : междунар. науч.-техн. конф. : тез. докл. ; редкол.: В.Н. Адериха [и др.]. – Гомель, 2015. – С. 75.
Most read articles by the same author(s)
- M. M., A. SOSNOVSKIY, A. GRIGORCHIK, A. ELOVIC, A. DUDAN, FEATURES OF COATINGS OF PSEUDOPLANES METHOD OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- V. ZHORNIK, S. KOVALEVA, M. BELOTSERKOVSKY, P. VITYAZ, T. GRIGORYEVA, A. DUDAN, INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DUDAN, A. RUTKOVSKY, M. AHIEIEV, V. MIRNENKO, Т. SMYRNOVА, O. RADKO, INCREASING THE STRENGTH PROPERTIES OF SURFACES OF STEEL PARTS VACUUM THERMOCYCLIC NITROGENIZATION IN PLASMA OF PULSATING GREAT DISCHARGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- A. DUDAN, V. LOPATA, V. KALINICHENKO, A. LOPATA, T. IVCHENKO, A. GRISHENKO, USE OF WORKING BODIES WITH DISCRETE COVERINGS TO INCREASE THE EFFICIENCY OF GRAIN CRUSHING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- M. BELOTSERKOVSKY, V. ZHORNIK, A. YALOVIK, A. DUDAN, RESTORATION OF SHAFTS BY COVERING WITH COMBINED COATINGS BY THE MEANS OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. ZHORNIK, M. BELOTSERKOVSKY, A. YALOVIK, A. DUDAN, SELECTING THE COMPOSITION OF THE APPLICATION COMPOSITION AND DETERMINING THE REGIMES OF TRIBOMECHANICAL PROCESSING OF STEEL GAS-THERMAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, G. GVOZDZ, V. KUKAREKO, KINEMATIC AND TECHNOLOGICAL SUPPORT FOR FORMING THE REGULAR MICRORELIEF OF SPHERICAL SURFACES OF PARTS BY COMBINED CUTTING WITH CUTTING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. ZHORNIK, A. IVAKHNIK, A. DUDAN, A. HUSHCHA, STRUCTURE AND PROPERTIES OF THE CALCIUM SULFONATE BASED GREASE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- V. KOSTRITSKI, A. LISOVSKI, A. DUDAN, CREATING MICRORELIEF ON THE INNER SURFACE OF THE CYLINDER LINER BY LASER RADIATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)