DETERMINING THE OPTIMAL TIMING OF THE ELECTROCONTACT SINTERING PROCESS FOR POWDER COATINGS
Article Sidebar
Main Article Content
Abstract
On the basis of experimental studies and using mathematical modeling comprehensive assessment of the impact of major technological parameters (pressure, current, speed of sintering) of the electrocontact sintering process of powders on physical and mechanical properties of the coatings (adhesion strength and durability) is given. Multivariate experiment with a certain variation of these parameters allowed us to estimate the impact of each of them on the properties of the coatings and to identify the effects of the interaction. It is concluded that in order to improve the physical and mechanical properties of the resulting coatings is advisable to use all three complex technological parameters of the process.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Предпосылки управления качеством формируемого покрытия и соединения его с деталью при электроконтактном припекании / В.Н. Корж [и др.] // Техніка в сільськогосподарському виробництві, галузеве машинобудування, автоматизація: зб. наукових праць Кіровоградського нац. техн. ун-ту. Вип. 23, Кіровоград, 2010. – С. 339–344.
Радченко, С.Г. Математичне моделювання та оптимізація технологічних систем / С.Г. Радченко // Навчальний посібник. – К.: ІВЦ «Політехніка», 2001. – 88 с.
Математичне моделювання та оптимізація технологічних систем: метод. вказівки до лаборатор.-комп’ют. практикуму для студ. спец. «Технологія машинобудування» усіх форм навчання / уклад.: С.М. Лапач, С.Г. Радченко, Р.В. Галайда. – К.: НТУУ “КПІ”, 2007. – 116 с.
Most read articles by the same author(s)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- V. ZHORNIK, S. KOVALEVA, M. BELOTSERKOVSKY, P. VITYAZ, T. GRIGORYEVA, A. DUDAN, INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DUDAN, A. RUTKOVSKY, M. AHIEIEV, V. MIRNENKO, Т. SMYRNOVА, O. RADKO, INCREASING THE STRENGTH PROPERTIES OF SURFACES OF STEEL PARTS VACUUM THERMOCYCLIC NITROGENIZATION IN PLASMA OF PULSATING GREAT DISCHARGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- A. DUDAN, V. LOPATA, V. KALINICHENKO, A. LOPATA, T. IVCHENKO, A. GRISHENKO, USE OF WORKING BODIES WITH DISCRETE COVERINGS TO INCREASE THE EFFICIENCY OF GRAIN CRUSHING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- M. BELOTSERKOVSKY, V. ZHORNIK, A. YALOVIK, A. DUDAN, RESTORATION OF SHAFTS BY COVERING WITH COMBINED COATINGS BY THE MEANS OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. ZHORNIK, M. BELOTSERKOVSKY, A. YALOVIK, A. DUDAN, SELECTING THE COMPOSITION OF THE APPLICATION COMPOSITION AND DETERMINING THE REGIMES OF TRIBOMECHANICAL PROCESSING OF STEEL GAS-THERMAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. ZHORNIK, A. IVAKHNIK, A. DUDAN, A. HUSHCHA, STRUCTURE AND PROPERTIES OF THE CALCIUM SULFONATE BASED GREASE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- V. KOSTRITSKI, A. LISOVSKI, A. DUDAN, CREATING MICRORELIEF ON THE INNER SURFACE OF THE CYLINDER LINER BY LASER RADIATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- О. MIKOSYANCHIK, В. LYASHENKO, N. KUZІN, A. DUDAN, SELECTION OF THE OPTIMAL PARAMETERS OF THE SURFACE LAYERS OF THE STRUCTURE TRIBOSYSTEMS TAKING INTO ACCOUNT THE MECHANICAL PROPERTIES OF THE GRADIENT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. ZHORNIK, S. KOVALIOVA, N. KHOMICH, T. GRIGORIEVA, A. DUDAN, S. GRIGORIEV, FORMATION OF COMPOSITE POWDERS OF SYSTEMS Fe–SiC AND Fe–B4C BY MECHANICAL SYNTHESIS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)