ANALYSIS AND REALIZATION OF CONTROL METHOD OF COMPLEX MULTI-FACETED SURFACE MACROGEOMETRY IN METAL-CUTTING TECHNOLOGY

Article Sidebar

Abstract views: 37
PDF Downloads: 14
pdf (rus) (Русский)
Published: Aug 27, 2015

Main Article Content

V. DANILOV
Polotsk State University
A. DANILOV
Polotsk State University

Abstract

The object of research is the diagrams of the kinematic profiling of complex multi-faceted surfaces by the trace method with continuous motion of pressure. Kinematic, geometry and combined control methods of macrogeometry of the mentioned surfaces with congruent and different shaped faces in the processing of cutting heads according to counter and climb cutting schemes are analyzed. The effect of the kinematic, constructive and configuration factors on macrogeometry of multi-faceted surfaces and the number of formed facets during the combining of the processes of formation and division is established. Kinematic structure and layout of the machine for the processing of cylindrical and conical multi-faceted surfaces and also multi-faceted surfaces with screw faces are considered. The possibility of complete machining of products with multi-faceted, circular and other surfaces on this machine are shown.

Article Details

How to Cite
DANILOV, V., & DANILOV, A. (2015). ANALYSIS AND REALIZATION OF CONTROL METHOD OF COMPLEX MULTI-FACETED SURFACE MACROGEOMETRY IN METAL-CUTTING TECHNOLOGY. Vestnik of Polotsk State University. Part B. Industry. Applied Sciences, (11), 2-9. Retrieved from https://journals.psu.by/industry/article/view/5551
Issue
No. 11 (2015)
Section
Machine-building and theoretical engineering
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Author Biography

V. DANILOV, Polotsk State University

д-р техн. наук, проф.

References

Данилов, В.А. Общие принципы управления формообразованием при обработке резанием / В.А. Данилов, В.А. Терентьев // Машиностроение: республ. межведомств. сб. науч. тр.: в 2-х т.; под ред. И.П. Филонова. – Минск: УП «Технопринт», 2004. – Т. 1, вып. 20. – С. 21–26.

Данилов, В.А. Управление топологией некруглых поверхностей, обработанных по схемам неполного формообразования / В.А. Данилов, А.А. Данилов // Вестн. Полоц. гос. ун-та. Серия В. Промышленность. Прикладные науки. – 2015. – № 4. – С. 2–9.

Грановский, Г.И. Кинематика резания / Г.И. Грановский. – М.: Машгаз, 1948. – 200 с.

Карелин Н.М. Бескопирная обработка цилиндрических деталей / Н.М. Карелин. – М.: Машиностроение, 1966. – 187 с.

Данилов, В.А. Новые технологии формообразования профильных и прерывистых поверхностей резанием / В.А. Данилов // Инженер-механик. – 2003. – № 3(20). – С. 26–31.

Данилов, В.А. Формообразующая обработка сложных поверхностей резанием / В.А. Данилов. – Минск: Наука и техника, 1995. – 264 с.

Федотенок, А.А. Кинематическая структура металлорежущих станков / А.А. Федотенок. – М.: Машиностроение, 1970. – 403 с.