ASSESSMENT OF SUCCINIMIDE ADDITIVES FOR LUBRICATING OILS DISPERCING ACTIVITY
Article Sidebar
Main Article Content
Abstract
The succinimide type additives synthesis stages and methods for evaluating their dispersing properties are considered. The mechanism of dispersant additives action is shown. The optimization of material balances as well as the optimal succinimide additives synthesis components selection was implemented as a result of the research carried out.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Специальные технологии переработки природных энергоносителей. Производство присадок и пакетов присадок к маслам : учеб.-метод. комплекс / С.В. Покровская [и др.]. – Новополоцк : ПГУ, 2014. – 132 с.
Золотов, А.В. Композиция гетероорганических соединений как антиокислительная и трибологически активная присадка к моторным маслам с улучшенными экологическими свойствами : дис. … канд. хим. наук : 02.00.13 / А.В. Золотов. – М., 2014. – 115 л.
Смазочные материалы и проблемы экологии / А.Ю. Евдокимов [и др.]. – М. : Нефть и газ, 2000. – 423 с.
Чудиновских, А.Л. Разработка научных основ химмотологической оценки автомобильных моторных масел : дис. … д-ра техн. наук : 05.17.07 / А.Л. Чудиновских. – М., 2016. – 239 л.
Данилов, А.М. Применение присадок в топливах / А.М. Данилов. – СПб. : Химиздат, 2010. – 307 с.
Кулиев, А.М. Химия и технология присадок к маслам и топливам / А.М. Кулиев. – М. : Химия, 1972. – 211 с.
Рудник, Л.Р. Присадки к смазочным материалам. Свойства и применение / Л.Р. Рудник ; пер. с англ. под ред. А.М. Данилова. – 2-е изд. – СПб. : Профессия, 2013. – 928 с.
Промышленный технологический регламент цеха № 2 (ТР-2020-02).
Манг, Т. Смазки. Производство, применение, свойства / Т. Манг, У. Дрезель. – СПб. : Профессия. 2010. – 925 с.
Хицман, Д.О. Качество моторных и реактивных топлив, масел и присадок (по материалам VII Мирового нефтяного конгресса) / Д.О. Хицман, Р.Е. Лимард ; под ред. К.С. Папок и А.Б. Виппера. – М. : Химия, 1970, – 300 с.
ASTM D7899-19 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method.
ASTM D7216-20a Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers.
Most read articles by the same author(s)
- D. YUKHNO, А. YERMAK, METHODS OF DESULFURIZATION OF PETROLEUM COKE (OVERVIEW), Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- D. YUKHNO, А. YERMAK, E. SYUBAREVA, STUDY OF PROPERTIES OF CALCINED PETROLEUM COKE OBTAINED FROM DISTILLATE AND RESIDUAL RAW MATERIALS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- V. LENCHIKOV, D. DABRAVOLSKI, A. UTKIN, I. BURAYA, A. YERMAK, INFLUENCE OF CARBOXYLIC ACIDS ON FILTERABILITY AND QUALITY LEVEL OF SYNTHETIC LOW ALKALINE CALCIUM SULFONATE (DETERGENT-DISPERSANT MOTOR OIL ADDITIVE), Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2021)
- А. YERMAK, I. BURAYA, A. SPIRIDONOV, Е. SYUBAREVA, I. KOVALYOVA, METHODS OF REGULATING THE CLOUD POINT OF DIESEL FUELS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DOSHCHONOK, K. MAYOROVA, I. BURAYA, INFLUENCE OF THE STRUCTURE OF HIGHER AMINES ON THE PROPERTIES OF SUCCINIMIDE TYPE ADDITIVES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- K. MAYOROVA, V. BAKUNIN, IR SPECTROSCOPY AS A METHOD FOR INVESTIGATION OF THE STRUCTURE OF SUCCINIMIDE TYPE ADDITIVES ACTIVITY, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- A. FAKEYEU, S. POKROVSKAYA, I. BURAYA, K. ANTUH, D. NIKOLIN, SYNTHESIS AND INVESTIGATION OF THE FUNCTIONAL PROPERTIES OF HIGH-QUALITY ABSOLUTELY SUFFICIENT SUKCINIMIDE ADDITIVES FOR THE LOW-SAPS MOTOR OILS PRODUCTION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- А. YERMAK, А. SVETLITSKIY, THE ALGORITHM FOR CALCULATING THE CONSUMPTION OF STEAM IN THE RAW MATERIAL PROCESS STEAM REFORMING OF HYDROCARBON GASES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2016)
- А. YERMAK, S. POKROVSKAYA, I. BURAYA, Е. SYUBAREVA, A. ZAVADSKIY, THE PROPERTIES AND PROMISING AREAS OF PROCESSING RESIDUAL PRODUCT OF THE PROCESS “UNICRACKING”, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- А. YERMAK, О. BUGAEVICH, THE CHANGE IN HYDROCARBON COMPOSITION OF GASOLINE CATALYTIC CRACKING MSCC AS A RESULT OF HIS POSTTREATMENT THROUGH THE PRIME G+ PROCESS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)