EFFECTIVENESS OF APPLICATION OF CONTACT-INITIATED MACHINING OF THE SURFACE OF WIRE INSTRUMENT TO GIVE IT CUTTING
Article Sidebar
Main Article Content
Abstract
Experimental estimation of the effectiveness of usage of contact-initiated machining of the initial surface of wire instrument to give it cutting capacity is considered. It is stated, that as the result of such machining hollows typical for electroerosive machining are formed on the surface of wire, having dissolves of metal on the edges, which come out of the circuit of wire. It is shown, that these dissolves of metal are peculiar cutting elements (shaped cutters in miniature), able to cut the material of a workpiece, the hardness of which is lower than the hardness of wire instrument. Results of experimental studies are presented, which prove the effectiveness of application of contact-initiated machining of the initial surface of wire instrument to give it cutting capacity.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Модификация исходной поверхности проволочного инструмента с целью придания ей режущей способности путем применения электроконтактной обработки / М.Г. Киселев [и др.] // Вестн. Белорусско-Российского ун-та. 2012. – № 1(34).
Влияние способа выполнения электроконтактной обработки исходной поверхности проволочного инструмента на его режущую способность / М.Г. Киселев [и др.] Вестн. ГГТУ им. П.О. Сухого. – 2012. – № 3(50).
Методика и оборудование для оценки режущей способности проволочного инструмента / М.Г. Киселев [и др.] // Метрология и приборостроение. – 2012. – № 1.
Most read articles by the same author(s)
- M. KISELEV, A DROZDOV, V. GABETS, D. YAMNАYA, THEORETICAL ESTIMATE OF THE EFFECT OF THE PARAMETERS OF THE CIRCULATING MOVEMENT OF THE WORKPIECE ON THE INTENSITY OF ITS CUTTING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2014)
- M. KISELEV, A. DROZDOV, THEORETICAL RESEARCH OF THE ROLLING BODY SPEED CHANGE UNDER ITS VIBROIMPACT SLANTING INTERACTION WITH THE ELASTIC BASIS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2013)
- M. KISELEV, A. DROZDOV, D. YAMNAJA, RESEARCH OF TIME AND FREQUENCY PARAMETERS OF THE CONTACT INTERACTION OF A BLANK PART WITH THE SAWING DISK IN THE TIME OF IMPOSITION OF TWO-DIMENSIONAL PERIODIC CIRCULATING MOTION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2012)