DESIGN WORK BASES OF ECCENTRIC GEAR DRIVES WITH INCREASED TECHNICAL LEVEL

Article Sidebar

Abstract views: 2
PDF Downloads: 1
pdf (rus) (Русский)
Published: Feb 24, 2012
Issue
No. 3 (2012)
Section
Машиностроение

Main Article Content

O. PECHKOVSKAYA
Belarusian-Russian University, Mogilev
M. PASHKEVICH
Belarusian-Russian University, Mogilev
Y. MASHIN
Belarusian-Russian University, Mogilev

Abstract

Ways of kinematic opportunities expansion and load-carrying capacity increase of eccentric gear drives by the engagement modification are considered. Methods of calculation and design of eccentric gear drives with the difference of internal involute engagement teeth numbers equal to one, distinguished by high values of transmission ratios in one stage, minimal dimensions and increased loading capacity in comparison with other existing gear drives are presented. On the basis of 3D-modelling, the most technological way of engagement modification with reference to one of hooked gearwheel is shown. Internal gear drive from a position of multipaired relationship of engagement is considered. Methods of mechanical calculation of eccentric gear drives with modified engagement and results of experimental investigation of kinematic accuracy and work smoothness of a small-sized reducer pre-production model are stated.

Article Details

How to Cite
PECHKOVSKAYA, O., PASHKEVICH, M., & MASHIN, Y. (2012). DESIGN WORK BASES OF ECCENTRIC GEAR DRIVES WITH INCREASED TECHNICAL LEVEL. Vestnik of Polotsk State University. Part B. Industry. Applied Sciences, (3), 65-70. Retrieved from https://journals.psu.by/industry/article/view/9669
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Author Biographies

O. PECHKOVSKAYA, Belarusian-Russian University, Mogilev

канд. техн. наук

M. PASHKEVICH, Belarusian-Russian University, Mogilev

д-р техн. наук, проф.

Y. MASHIN, Belarusian-Russian University, Mogilev

канд. техн. наук

References

Кудрявцев, В.Н. Планетарные передачи / В.Н. Кудрявцев. – 2-е изд., перераб. и доп. – М.-Л.: Машиностроение, 1966. – 307 с.

Планетарная передача: пат. 5092 С2 РБ, МПК7 F 16 H1/28 / А.М. Пашкевич, В.М. Пашкевич, В.В. Геращенко, М.Ф. Пашкевич; заявитель и патентообладатель Могилев. гос. техн. ун-т. – № 19981087; заяв-лено 30.11.98; опубл. 30.03.03, Бюл. № 1(36). – 161 с.

Планетарные передачи: справ. / под ред. В.Н. Кудрявцева, Ю.Н. Кирдяшева. – Л.: Машиностроение, 1977. – 535 с.

Пашкевич, М.Ф. Планетарные шариковые и роликовые редукторы и их испытания / М.Ф. Пашкевич, В.В. Геращенко. – Минск: БелНИИНТИ, 1992. – 248 с.