INTEGRATED VIDEO MONITORING SYSTEM TO TEST STRENGTH AND DEFORMABILITY OF BUILDING MATERIALS AND STRUCTURES
Article Sidebar
Main Article Content
Abstract
The paper proposes the architecture of a video monitoring system for the state and ongoing physical processes in a building material or structure during stress testing. It is based on the use of video cameras and an algorithm for image sequence processing for reading, recognizing and writing to a personal computer the readings of digital devices in real time. An algorithm for processing video data has been developed, which includes frameby- frame capture of video streams, digital display area segmentation, improving the image quality of the selected area, digital data recognition, obtained values post-processing. The results are displayed online on the monitor screen and can be saved to a file, which provides an opportunity for further analysis. The proposed system has been tested in the testing and research center of Polotsk State University and is promising for testing elements of building structures using digital measuring instruments.
Article Details

This work is licensed under a Creative Commons Attribution 4.0 International License.
R. BOHUSH, Полоцкий государственный университет
канд. техн. наук, доц.
D. GLUKHOV, Полоцкий государственный университет
канд. техн. наук, доц.
References
Qi Liang. Fundamental Tests on a Structural Health Monitoring System for Building Structures Using a Single-board Microcontroller / Qi Liang, Akinori Tani, Yuichiro Yamabe // Journal of Asian Architecture and Building Engineering. – 2015. – Vol. 14, iss. 3 – P. 663–670.
Методика сопровождения развития структурных дефектов в цементных системах / Д.Н. Шабанов [и др.] // Вестн. Полоц. гос. ун-та. Сер. F, Строительство. Прикладные науки. – 2018. – № 16. – С. 67–71.
Kongshaug, S. Experimental investigation of ASR-affected concrete – The influence of uniaxial loading on the evolution of mechanical properties, expansion and damage indices / S. Kongshaug [et al.] // Construction and Building Materials. – 2020. – Vol. 245.
Malekia, M. On the effect of ITZ thickness in meso-scale models of concrete / M. Malekia [et al.] // Construction and Building Materials. – 2020. – Vol. 258.
Ahmadi, M. New empirical approach for determining nominal shear capacity of steel fiber reinforced concrete beams / M. Ahmadi [et al.] // Construction and Building Materials. – 2020. – Vol. 234.
Zalegowski, K. Relation between microstructure, technical properties and neutron radiation shielding efficiency of concrete / K. Zalegowski [et al.] // Construction and Building Materials. – 2020. – Vol. 235.
Li, P.P. Optimization and characterization of high-volume limestone powder in sustainable ultra-high performance concrete / P.P. Li [et al.] // Construction and Building Materials. – 2020. – Vol. 242.
Tesseract: an Open-Source Optical Character Recognition Engine [Электронный ресурс]. – Режим доступа: https://www.linuxjournal.com/article/9676. – Дата доступа: 13.02.2019.
Гонсалес, Р. Цифровая обработка изображений / Р. Гонсалес, Р. Вудс. – Изд. 3-е, исправл. и доп. – М. : Техносфера, 2012. – 1104 с.
Most read articles by the same author(s)
- D. SHABANOV, A. YAGUBKIN, V. HVATYNETS, E. TRAMBITSKY, TECHNIQUE OF SUPPORTING THE DEVELOPMENT OF STRUCTURAL DEFECTS IN CEMENT SYSTEMS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2018)
- A. LAZOVSKY, D. GLUKHOV, T. GLUKHOVA, ALGORITHM OF CALCULATION OF RESISTANCE TO BENDING OF PRECAST PRESTRESSED HOLLOW-CORE SLABS IN PLATFORM JOINTS OF BUILDINGS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2017)
- D. SHABANOV, A. YAGUBKIN, E. BOROVKOVA, E. TRAMBITSKY, METHOD OF ACOUSTIC-EMISSION STUDY OF THE INTERNAL STATE OF CEMENT STONE DURING ITS CHLORIDE CORROSION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2019)
- D. SHABANOV, E. BRIANTSEV, A. YAGUBKIN, I. KRUPENCHIK, S. ZMITROVICH, INSULATION MATERIAL AND THEIR CONVECTIVE PROPERTIES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2019)
- A. YAGUBKIN, M. GUONA, H. WANG, SHOTCRETES AND MORTARS FOR 3D PRINTERS USING CHINESE INDUSTRIAL WASTE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 3 (2023)
- D. GLUKHOV, R. BOGUSH, Е. LAZOVSKY, T. GLUKHOVA, PROBABILITY ANALYSIS OF THE STRUCTURAL REINFORCED CONCRETE ELEMENT, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- D. GLUKHOV, Т. GLUKHOVA, A. ANDRIEVSKY, A. YANUSHONOK, THE ALGORITHM OF CALCULATION OF THE COMMODITY-TRANSPORT WORK THE MAIN GAS PIPELINE IN THE FRAMEWORK OF NON-ISOTHERMAL STEAD, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2018)
- D. GLUKHOV, Т. GLUKHOVA, A. ANDRIEVSKY, A. YANUSHONOK, THE GAS BALANCE IN THE SYSTEM OF INTERCONNECTED GAS PIPELINES UNDER NON-ISOTHERMAL STEADY STATE MODEL OF GAS TRANSPORTATION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2018)
- D. SHABANOV, A. YAGUBKIN, E. BOROVKOVA, E. TRAMBITSKY, MONITORING THE STRUCTURAL STATE OF CEMENT SYSTEMS BY ACOUSTIC EMISSION AND TENZOMETRY SIGNAL PARAMETERS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2019)
- A. YAGUBKIN, Z. ZHIXU, METHODS FOR REMOTE QUALITY CONTROL OF COMPOSITES WITH ORGANIC AGGREGATES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 14 (2022)