PLANE SECTION HYPOTHESIS IN MODELING REINFORCED CONCRETE ELEMENTS BASED ON A NONLINEAR DEFORMATION COMPUTATION MODEL
Article Sidebar
Main Article Content
Abstract
The use of a nonlinear deformation calculation model for reinforced concrete elements requires consideration of the specifics of applying the flat-section hypothesis after the formation of normal tensile cracks in the cross-section (uneven deformation of concrete in the compressed zone along the element's length and the work of tensile concrete between and above the cracks). Two options for accounting for the deformation characteristics of cracked reinforced concrete are considered: the use of transformed concrete and reinforcement deformation diagrams for an averaged section, which corresponds to the flat-section hypothesis for the deformation process; and the use of the original deformation diagrams for a section with a crack, followed by a transition to mean deformations.
Article Details

This work is licensed under a Creative Commons Attribution 4.0 International License.
D. LAZOVSKY, Euphrosyne Polotskaya State University of Polotsk
д-р техн. наук, проф.
V. TUR, Brest State Technical University
д-р техн. наук, проф.
D. GLUKHOV, Softclub LLC, Minsk
канд. техн. наук, доц.
References
Karpenko, N.I. (1996). Obshchiye modeli mekhaniki zhelezobetona. Moscow: Stroyizdat. (In Russ.).
Lazovskiy, D.N. (1998). Usileniye zhelezobetonnykh konstruktsiy ekspluatiruyemykh stroitel'nykh sooruzheniy. Novopolotsk: Polots. gos. un-t. (In Russ.).
Bondarenko, V.M. & Kolchunov, V.I. (2004). Raschetnyye modeli silovogo soprotivleniya zhelezobetona. Moscow: ASV. (In Russ.).
Kolchunov, V.I., & Pimochkin, V.N. (2005). Deformatsionnyy effekt pri soprotivlenii rastyanutogo betona mezhdu treshchinami v zhelezobetonnom elemente (ili vskrytiye istinnykh prichin raskhozhdeniya vneshnikh i vnutrennikh usiliy v poperechnom sechenii zhelezobetonnogo elementa, rasschityvayemogo po teorii V.I. Murasheva). Izvestiya Orlovskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Stroitel'stvo i transport, 3-4, 49–55. (In Russ.).
Fedorov, V.S., & Levitskiy, V.Ye. (2014). Raschetnyye modeli v teorii zhelezobetona. Perspektivy razvitiya stroitel'nogo kompleksa, 1, 268–279. (In Russ.).
Trekin, N.N., Kodysh, E.N., Parfenov, S.G., & Andryan K.R. (2023). Razvitiye metoda rascheta zhelezobetonnykh konstruktsiy po obrazovaniyu i raskrytiyu normal'nykh treshchin. Zhelezobetonnyye konstruktsii, 4(4), 20–31. DOI: 10.22227/2949-1622.2023.4.20-31. (In Russ.).
Mirsayapov, I.T., Antakov, I.A., & Antakov, A.B. (2021). K raschetu progibov izgibayemykh betonnykh elementov, armirovannykh kompozitnoy polimernoy armaturoy. Vestnik MGSU, 16(4), 413–428. DOI: 10.22227/1997-0935.2021.4.413-428. (In Russ., abstr. in Engl.).
Murashev, V.N., Sigalov, E.Ye., & Baykov, V.N. (1962). Zhelezobetonnyye konstruktsii. Moscow. (In Russ.).
Nemirovskiy, Ya.M. (1955). Zhestkost' izgibayemykh zhelezobetonnykh elementov pri kratkovremennom i dlitel'nom zagruzheniyakh. Beton i zhelezobeton, 5, 172–176. (In Russ.).
Nemirovskiy, Ya.M. (1968). Issledovaniye napryazhenno-deformirovannogo sostoyaniya zhelezobetonnykh elementov s uchetom raboty rastyanutogo betona nad treshchinoy i peresmotr na etoy osnove teorii rascheta deformatsiy i raskrytiya treshchin. In A. Gvozdev (Eds.) Prochnost' i zhestkost' zhelezobetonnykh konstruktsiy: sb. nauch. st. (47–54). Moscow. (In Russ.).
Bortolotti, L. (1991). First Cracking Load of Concrete Subjected to Direct Tension. ACI Materials Journal, 88(1), 70–73.
Kolleger, J. (1991). Comparison of Fixed and Rotating Crack Models in the Analysis of Panels, Plates and Shells Subjected to Shear. In Concrete Shear in Earthquake: Houston International Workshop, Texas, USA, 13–16 January 1991 (216–225).
Tur, V.V., & Rak, N.A. (2003). Prochnost' i deformatsii betona v raschetakh konstruktsii: monografiya. Brest: BGTU. (In Russ.).
Most read articles by the same author(s)
- N. RYABENKO, V. TUR, SETTING TO DETERMINE THE LENGTH OF THE ZONE OF TRANSMISSION OF STRESS IN THE PRE-STRESSED REINFORCEMENT CONCRETE ELEMENTS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- V. TUR, A. PIKULA, EXPERIMENTAL STUDIES OF ECOLOGICALLY-CLEAN THERMAL INSULATION NON-AUTOCLAVE COMPOSITES BASED ON FLAX SHIVE AND DIFFERENT KINDS OF LIME CONTAINING BINDERS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2015)
- V. TUR, V. MALYHA, EXPERIMENTAL RESEARCH OF BENDABLE CONCRETE ELEMENTS WITH COMBINED REINFORCEMENT BY STEEL AND GLASS-PLASTIC BARS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2013)
- V. DRAGAN, V. TUR, N. MORILOVA, А. DMITRIEVA, CALCULATION OF RELIABILITY OF METAL STRUCTURAL CONSTRUCTION OF A SYSTEM, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2013)
- MIN HAO, V. TUR, STUDY ON THE COMPRESSIVE MECHANICAL PROPERTIES OF RECYCLED AGGREGATE EXPANSIVE CONCRETE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 1 (2026)