CALCULATION OF RELIABILITY OF METAL STRUCTURAL CONSTRUCTION OF A SYSTEM
Article Sidebar
Main Article Content
Abstract
Calculation of reliability of metal structural construction of a system is shown, particularly of largespan spatial metal constructions of coverage. The task of direct evaluation of reliability of a complex spatial construction system when using DPD-method is considered, for which the functions of influence, connecting actions and their effects, are set on the basis of non-linear calculations with the usage of the method of finite elements. The methodology of research of the reliability parameters of structural constructions of “BSTU” system is proposed. Constructional forms of large-span spatial constructions and evaluation of the parameters of their reliability are analyzed.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Основы проектирования конструкций: ТКП EN 1990. – Минск: Типпроект, 2011. – 137 с.
Общие принципы обеспечения надежности строительных конструкций: СТБ ISO2394. – Минск: Типпроект, 2008. – 142 с.
Нормы проектирования. Нагрузки и воздействия: СНиП 2.01.07-85 / Госстрой СССР. – М.: ЦНИТП Госстроя СССР, 1986. – 36 с.
Общие воздействия. Снеговые нагрузки: ТКП EN 1991-1-4. – Минск: Типпроект, 2009.
Manjuinath, K. Reliability based Analysis of Steel Truss Member / K. Manjuinath, S. Kumar // International Journal of Emerging Technology and Advanced Engineering. – Vol. 2, issue 11, November, 2012. – P. 569 – 572.
Jankovski, V. MATLAB implementation in direct probability design of optimal steel trusses / V. Jankovski, J. Atkociunas // MECHANIKA, 2008, № 6(74). – P. 30 – 37.
Moghads, R. Reliability assement of structure by Monte-Carlo Simulation and neural networks / R. Moghads, M. Fadee // Asian Journal of Civil Engineering (Building and Housing). – 2012. – Vol. 13, № 1. – P. 79 – 88.
Borkovski, A. On reliability analysis and optimization of plastic plane frames / A. Borkovski, K. Sikorski // Rozprawy Inzymerskie. – 1985, 33. – P. 311 – 312.
Пичугин, С.Ф. Надежность стальных конструкций производственных зданий: моногр. / С.Ф. Пичугин. – М.: Изд-во АСВ, 2011. – 456 с.
Аугусти, Г. Вероятностные методы в строительном проектировании / Г. Аугусти, А. Баратта, Ф. Каштиани; пер. с англ. Ю.Д. Сухова. – М.: Стройиздат, 1988. – 584 с.
Лычев, А.С. Надежность строительных конструкций: учеб. пособие / А.С. Лычев. – М.: Изд-во Ассоциации строительных вузов, 2008. – 184 с.
Дереченник, С.С. Автоматизация картографирования в задачах долгосрочного климатического прогнозирования / С.С. Дереченник, А.В. Дмитриева // Вестн. БрГТУ. – 2010. – № 5(65): Физика, математика, информатика. – С. 44 – 48.
Most read articles by the same author(s)
- A. VARABEI, V. TUR, EXPERIMENTAL STUDIES OF THE RESISTANCE SHEAR OF SELF-STRESSED CONCRETE BEAMS UN-DER DIFFERENT LOADING CONDITIONS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2021)
- I. LAZOUSKAYA, R. ANDREEVA, V. TUR, DURABILITY EVALUATION OF SULFUR CONCRETE OF VARIOUS COMPOSITION, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2019)
- V. TUR, A. LAZOUSKI, COMPUTATIONAL MODEL OF BENDING STRENGTH OF HOLLOW CORE SLAB FLOORS AS PARTS OF PLATFORM JOINTS OF BUILDINGS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2016)
- V. TUR, T. PETCOLDT, N. RAK, A NEW APPROACH TO THE CONCRETE STRUCTURES DESIGN: SECOND GENERATION OF EUROCODES AND NATIONAL CODES, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2018)
- V. SANNIKAVA, V. TUR, THE VERIFICATION OF “STRUT-AND-TIES” MODEL FOR THE SINGLE REINFORCED CONCRETE BEAMS WITH THE CONCENTRATED LOAD, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2018)
- V. TUR, V. SANNIKAVA, A DESIGN MODEL FOR RESTRAINED STRAINS ESTIMATION AT EXPANSION STAGE OF CONCRETE IN TWO-WAY RESTRAINT CONDITIONS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2016)
- А. TUR, V. TUR, ON THE APPLICATION OF NONLINEAR ANALYSIS IN THE DESIGN OF STRUCTURAL SYSTEMS OF REINFORCED CONCRETE, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- V. TUR, V. NADOLSKI, F. VEREVKA, PRINCIPLES OF CALCULATION OF DESIGN COMBINATIONS IN ACCORDANCE WITH TCP EN 1990, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2018)
- N. RYABENKO, V. TUR, SETTING TO DETERMINE THE LENGTH OF THE ZONE OF TRANSMISSION OF STRESS IN THE PRE-STRESSED REINFORCEMENT CONCRETE ELEMENTS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 16 (2017)
- V. TUR, A. PIKULA, EXPERIMENTAL STUDIES OF ECOLOGICALLY-CLEAN THERMAL INSULATION NON-AUTOCLAVE COMPOSITES BASED ON FLAX SHIVE AND DIFFERENT KINDS OF LIME CONTAINING BINDERS, Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences: No. 8 (2015)