INCREASED WEAR RESISTANCE OF PARTS HEAVY-LOADED FRICTION ASSEMBLY OF VEHICLES
Article Sidebar
Main Article Content
Abstract
The paper shows that in order to increase the service life of parts of heavily loaded friction units of cars, it is recommended to use complex lubricants: lithium grease using a structuring and pre-processing additive in the form of a package of nanoscale diamonds and calcium sulfate with fluoroplast additives and a viscous additive. The tests are modeled on the basis of the operating conditions of the axle – bushing balancer friction pairs operated with contact pressure 1.5–6.0 MPa. It is established that for the bronze–steel friction pair under conditions of boundary friction at the specified contact pressure, the maximum wear resistance of the samples at the stages of run-in and established friction is achieved by using a complex calcium sulfate grease with fluoroplast additives and a viscous additive. The use of a complex lithium lubricant with nanoscale diamonds reduces the run-in period in all these modes and is effective at a specific load not exceeding 3 MPa.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Leontʹyev, L.B., Leontʹyev, A.L. & Makarov, V.N. (2014). Sistemnyy analiz tekhnologii formirovaniya iznosostoykikh pokrytiy na poverkhnostyakh treniya detaley [System analysis of technology for the formation of wear-resistant coatings on friction surfaces of parts]. Fundamentalʹnyye issledovaniya [Fundamental research], (12, part 4), 729–734. (In Russ., abstr. in Engl.).
Vityazʹ, P.A., Zhornik, V.I., Kukareko, V.A., Komarov, A.I. & Senyutʹ, V.T. (2011). Modifitsirovaniye materialov pokrytiy nanorazmernymi almazosoderzhashchimi dobavkami [Modification of coating materials with nanosized diamond-containing additives]. Minsk: Minsk: Bielaruskaja Navuka. (In Russ.).
Vityazʹ, P.A., Ilʹyushchenko, A.F. & Zhornik, V.I. (2013). Nanoalmazy detonatsionnogo sinteza: polucheniye i primeneniye [Nanodiamonds of detonation synthesis: production and application]. In Р.А. Vityazʹ (Eds.). Minsk: Minsk: Bielaruskaja Navuka. (In Russ.).
Most read articles by the same author(s)
- S. PILIPENKO, V. TERESHCHENKO, A. DUDAN, INFLUENCE OF COLD PIPE ROLLING PARAMETERS TO CHANGE THE WALL THICKNESS ALONG THE CONF OF DEFORMATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- M. M., A. SOSNOVSKIY, A. GRIGORCHIK, A. ELOVIC, A. DUDAN, FEATURES OF COATINGS OF PSEUDOPLANES METHOD OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- V. ZHORNIK, S. KOVALEVA, M. BELOTSERKOVSKY, P. VITYAZ, T. GRIGORYEVA, A. DUDAN, INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DUDAN, A. RUTKOVSKY, M. AHIEIEV, V. MIRNENKO, Т. SMYRNOVА, O. RADKO, INCREASING THE STRENGTH PROPERTIES OF SURFACES OF STEEL PARTS VACUUM THERMOCYCLIC NITROGENIZATION IN PLASMA OF PULSATING GREAT DISCHARGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- D. KAPSKIY, A. GOLOVNICH, T. VIGERINA, V. KUZMENKO, A. KRASILNIKOVA, Ye. GORELIK, S. SEMCHENKOV, Ye. KOT, DEVELOPMENT OF URBAN TRANSPORT IN THE CITIES OF POLOTSK AND NOVOPOLOTSK, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- V. IVANOV, T. VIGERINA, DIRECTIONS FOR IMPROVING STUDENT TRAINING FOR THE SPECIALTY «TECHNICAL MAINTENANCE OF VEHICLES», Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- V. IVANOV, T. VIGERINA, RESOURCE-SAVING RUN-IN OF INTERNAL COMBUSTION ENGINES AT USE OF OIL MODIFYING ADDITIVES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- A. DUDAN, V. LOPATA, V. KALINICHENKO, A. LOPATA, T. IVCHENKO, A. GRISHENKO, USE OF WORKING BODIES WITH DISCRETE COVERINGS TO INCREASE THE EFFICIENCY OF GRAIN CRUSHING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- M. BELOTSERKOVSKY, V. ZHORNIK, A. YALOVIK, A. DUDAN, RESTORATION OF SHAFTS BY COVERING WITH COMBINED COATINGS BY THE MEANS OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)