MODELLING OF INFLUENCE OF ROUGHNESS OF THE SPHERICAL SURFACE OF THE PART ON FEED SPEED SELECTION OF THE ROTATING CUTTING TOOL
Article Sidebar
Main Article Content
Abstract
Influence of roughness of the spherical surface of the part on feed speed selection of the rotating cutting tool was examined. Goals of the study were formulated. Mathematical modeling of the studied process was carried out. The formulas for calculating the installation parameters of the cutting tool, workpiece and tool feed speed due to the roughness of the treated spherical surface of the part are specified. Results of sample processing of parts for given values of the roughness and the corresponding tool feed were analysed.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Аналитическое решение задачи о формообразовании шаровых пробок путем обжима трубных заготовок в полусферических матрицах / М.М. Тверской [и др.] // Вестн. ЮУрГУ: Серия «Машиностроение», 2014. – Т. 14, № 2. – С. 39–50.
Кожевникова, Г.В. Теория и практика поперечно-клиновой прокатки / Г.В. Кожевникова. – Минск: Белорус. наука, 2010. – 291 с.
Способ изготовления сферической заготовки пробки шарового крана: пат. 2393047 (RU) МПК В22С9/00 / В.П. Анисимов, А.А. Цыбулаев. – № 2008135944/02; заявл. 08.09.2008; опубл. 20.03.2010.
Анализ способов обработки сферических поверхностей / Н.Н. Попок [и др.] // Вестн. Полоц. гос. ун-та: Сер. В. Прикладные науки. Промышленность. – 2006. – № 12. – С. 42–45.
Попок, Н.Н. Теория резания: учеб. пособие для студентов машиностр. специальностей / Н.Н. Попок. – Новополоцк: ПГУ, 2006. – 228 с.
Most read articles by the same author(s)
- N. POPOK, A. FRIK, ANALYSIS OF THERMOCOUPLES FOR MEASURING TEMPERATURE IN RUBBER MIXERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, N. BELYAKOV, AUTOMATED SELECTION SYSTEM FOR MEASURING GEOMETRIC VALUES FOR TECHNOLOGICAL PREPARATION OF ADDITIVE AND SUBTRACTIVE ENGINEERING INDUSTRIES DETAILS OF COMPLEX SHAPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- N. POPOK, N. BELYAKOV, D. YASNEV, DECISION SUPPORT SYSTEM FOR BASING MODELS OF MACHINE PARTS IN THE WORKING AREA OF 3D-PRINTERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2022)
- N. POPOK, A. BALYSH, NON-WELDED SEALED FITTINGS FOR SMALL DIAMETER PIPELINES AND TUBING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, V. ANISIMOV, KINEMATICS OF PROCESSING SURFACES OF PARTS WITH A ROTATING CUTTING TOOL WITH A TANGENT MOVEMENT OF THE CUTTING EDGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- N. POPOK, N. BELYAKOV, V. YANOVICH, DIMENSIONAL ADJUSTMENT DECISION SUPPORT SYSTEM END MILLS FOR PROGRAMMING MACHINING ON CNC MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- N. POPOK, N. BELYAKOV, Y. MAKHARINSKY, D. LATUSHKIN, PRACTICAL APPLICATION OF BASING THEORY FOR SYNTHESIS UNIVERSAL-PREFABRICATED DEVICES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- N. POPOK, V. ANISIMOV, DEFORMATION AND CHIP FORMATION WHEN PROCESSING FLAT AND CURVED SURFACES OF PARTS WITH A ROTATING CUTTING TOOL ON CNC LATHES AND MILLING MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2020)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, PROCESSING TECHNOLOGY FOR PARTIAL SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- S. ABRAMENKO, V. ANISIMOV, K. KORBA, SOFTWARE AND HARDWARE COMPLEX FOR MEASUREMENT, REGISTRATION AND FOLLOWING PROCESSING OF PROCESSES PROCESSING AT HIGH-SPEED MECHANICAL PROCESSING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2021)