ANNEALING OF COLD-ROLLED STRIPS IN SHIELDING GAS ATMOSPHERE
Article Sidebar
Main Article Content
Abstract
The results of modeling the processes of annealing cold-worked coils of extra-thin steel strip of high quality in protective atmospheres of hydrogen and nitrogen in bell-type furnaces are presented. An algorithm for calculating the optimal value of the heating time is given, taking into account the thermophysical properties of both processed hard-worked coils of extra-thin steel strip and protective atmosphere gases. A technique for optimizing the modes of annealing of hard-worked coils of extra-thin steel strip in a bell-type furnace in a pure nitrogen environment relative to the basic mode in a pure hydrogen environment is presented.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
S. PILIPENKO, Euphrosyne Polotskaya State University of Polotsk
канд. техн. наук, доц.
O. SHTEMPEL', Euphrosyne Polotskaya State University of Polotsk
канд. техн. наук, доц.
References
Mazur, V.L., Timoshenko, V.I. & Prikhod'ko, I.Yu. (2021). Vliyanie rezhimov otzhiga v kolpakovykh pechakh na napryazhenno-deformirovannoe sostoyanie rulonov kholodnokatanoi stali [Influence of annealing modes in bell-type furnaces on the stress-strain state of cold-rolled steel coils]. Stal' [Steel], (9), 22–29. (In Russ., abstr. in Engl.)
Mikheev, M.A. & Mikheeva, I.M. (1977). Osnovy teploperedachi. Moscow: Energiya. (In Russ.)
Averin, S.I., Gol'dfarb, E.M. & Kravtsov, A.F. (1969). Pod red. N.Yu. Taints. Raschety nagrevatel'nykh pechei. Kiev: Metallurgiya. (In Russ.)
Most read articles by the same author(s)
- V. FRUCKI, S. PILIPENKO, ALTERNATIVE MATERIALS REPAIR ROTARY GROUP, THE PUMP-MOTORS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- S. PILIPENKO, O. SHTEMPEL, V. FRUTSKIY, V. KOSTRITSKIY, RESTORING THE FUNCTIONALITY OF THE “NEEDLE-BODY” CONNECTION OF THE DIESEL ENGINE NOZZLE SPRAYER, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- V. DʹYAKONOV, S. PILIPENKO, O. SHTEMPELʹ, INFLUENCE OF DEFORMATION ON THE MECHANICAL PROPERTIES OF TIN-PLATED TIN, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- S. PILIPENKO, V. GRIGORENKO, INCREASING THE ACCURACY OF DETERMINING THE Q-FACTOR IN CONTROL SECTIONS OF THE STAN DEFORMATION CONE COLD PILGER ROLLING PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- S. PILIPENKO, V. TERESHCHENKO, A. DUDAN, INFLUENCE OF COLD PIPE ROLLING PARAMETERS TO CHANGE THE WALL THICKNESS ALONG THE CONF OF DEFORMATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- S. PILIPENKO, V. FRUCKI, M. KONON, THERMAL PROPERTIES OF GAS-THERMAL REPAIR COATINGS SHAFTS TO FIT BEARINGS , Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- S. PILIPENKO, METHOD FOR CALCULATION OF BROADENING DURING COLD ROLLING OF STRIPS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- S. PILIPENKO, ANALYSIS OF THE INFLUENCE OF SEPARATE CALIBRATION PARAMETERS OF THE WORKING TOOL OF THE COLD ROLLING PIPES MILLS ON THE Q-FACTOR DISTRIBUTION ALONG THE DEFORMATION CONE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- S. PILIPENKO, PARAMETERS OF THE DEFORMATION CONTAINMENT VOLUME AT THE BACKWARD STROKE OF COLD-DIE-PILGERING AND COLD-ROLLER-PILGERING MILLS WHEN FEEDING THE BILLET IN EITHER POSITIONS OF THE STAND, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)