INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE
Article Sidebar
Main Article Content
Abstract
The products of mechanical alloying (MA) of a powder mixture of ultrahigh-molecular weight polyethylene and microcrystalline boron carbide (B4C) produced in the high-energy spherical planetary mill during with an energy density I = 1.1 W/g for a duration of 5 up to 25 minutes were studied by the methods of X-ray diffraction, scanning electron microscopy and FT-IR spectroscopy. It is shown that the polymeric composite particles of flake form of a size of 100…160 μm with a chaotic distribution in them of the boron carbide particles of size of 1…5 μm are formed during mechanical alloying. Oxidative degradation of the polymer is not observed. MA promotes the formation of a boron carbide structure with a lower carbon content (B6.5C). The main possible results of the interaction of the polymer matrix and dispersed filler powders in MA are the cross-linking processes with some possible decrease in its molecular weight.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Structure, mechanical and tribological properties of radiation cross-linked ultrahigh molecular weight polyethylene and composite materials based on it. / V.V. Tcherdyntsev [et al.] // Journal of Alloys and Compounds. – 2014. – V. 586, Is. 1. – P. 443–445.
Механокомпозиты – прекурсоры для создания материалов с новыми свойствами / отв. ред. О.И. Ломовский. – Новосибирск : Изд-во СО РАН (Интеграционные проекты СО РАН, вып. 26), 2010. – 432 с.
Calculation of energy intensity and temperature of mechanoactivation process in planetary ball mill by computer simulation [Text] / E.V. Shelekhov [et al.] // Investigations and Applications of Severe Plastic Deformation ; Eds. T.C. Lowe and R.Z. Valiev ; Kluwer Academic Publishers, 2000. – Р. 139–145.
Increasing wear resistance of UHMWPE by mechanical activation and chemical modification combined with addition of nanofibers / S. Wannasri [et al.] // Procedia Engineering, 1 (2009). – P. 67–70.
Влияние механической активации сверхвысокомолекулярного полиэтилена на его механические и триботехнические свойства / В.Е. Панин [и др.] // Трение и износ. – 2010 (31). – № 2. – P. 13–19.
Iasonna, А. Power measurements during mechanical milling. An experimental way to investigate the energy transfer phenomena / А. Iasonna, M. Magini // Acta Materialia. – Vol. 44 (1996), No. 3. – P. 1109–1117.
Balzar, В. Voight-function model in diffraction line-broadening analysis / В. Balzar // Microstructure Analysis from Diffraction ; ed. by R.L. Snyder, H.J. Bunge, and J. Fiala / International Union of Crystallography, 1999.
Aselage, T.L. Lattice Constants of Boron Carbide / T.L. Aselage, R.G. Tissot // J. Am. Ceram. Soc., 75 [8] 2207–12 (1992).
ИК-спектроскопия карбида бора различной стехиометрии / Е.В. Лифшиц [и др.] // Вопросы атомной науки и техники. – 2004. – № 3. 19. Серия: Физика радиационных повреждений и радиационное материаловедение (85). – С. 19–22.
Clark, H.K. The Crystal Structure of Boron Carbide / H.K. Clark and J.L. Hoard // J. Am. Chem. Soc., 65, 2115–9 (1943).
Vast, N. Boron Carbides from First Principles / N. Vast, J. Sjakste, and E. Betranhandy // J. Phys. Conf. Ser., 176, 012002 (2009).
Kuhlmann, U. Distribution of Carbon Atoms on the Boron Carbide Structure Elements / U. Kuhlmann, H. Werheit, K.A. Schwetz // J. Alloy. Compd., 189 (1992). – P. 249–58.
Domnich, V. Chhowalla M. Boron Carbide: Structure, Properties, and Stability under Stress / V. Domnich, S. Reynaud, R.A. Haber // J. Am. Ceram. Soc., 94 [11] (2011). – P. 3605–3628.
Most read articles by the same author(s)
- F. PANTELEENKO, M. KARPETS, M. BELOTSERKOVSKY, A. SOSNOVSKY, INFLUENCE OF HYPERSONIC METALLIZATION MODES ON THE ADHESION STRENGTH OF METAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- A. DUBKO, N. CHVERTKO, A. LEBEDEV, A. DUDAN, HISTORICAL ASPECTS OF THE DEVELOPMENT OF ELECTROSURGERY, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- V. ZHORNIK, A. ZAPOLSKY, A. IVAKHNIK, A. DUDAN, TECHNOLOGIES AND EQUIPMENT FOR PRODUCTION BIODEGRADABLE GREASES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2022)
- A. DUDAN, T. VIGERINA, V. KRAVCHUK, I. PILIPENOK, INCREASED WEAR RESISTANCE OF PARTS HEAVY-LOADED FRICTION ASSEMBLY OF VEHICLES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- S. PYLYPENKO, A. DUDAN, D. RADULЕVIC, INFLUENCE OF THE BENDING RADIUS OF PIPES ON STRENGTH PARAMETERS AUTOMOBILE PIPELINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- G. VARIKOV, K. DROZD, V. ZHORNIK, INFLUENCE OF MODES OF APPLICATION OF MODIFIED POLYMER COATINGS ON THEIR ADHESION STRENGTH, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. GRIGORCHIK, E. ASTRASHAB, M. BELOTSERKOVSKIY, V. KUKAREKO, A. SOSNOVSKIY, A. DUDAN, WEAR RESISTANCE OF GAS-THERMAL COATINGS FROM COPPER-ALLOYS ON THE BASIS OF COPPER OBTAINED BY HIGH-SPEED METALLIZATION METHOD, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- М. BELOTSERKOVSKIJ, A. DUDAN, A. YALOVIK, RECONDITIONING AND TESTING OF A HYDROLIC POWER CYLIN-DER ROD, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2021)
- V. ZHORNIK, STRUCTURAL-PHASE STATE AND PROPERTIES OF TUNGSTEN-COPPER-COBALT ALLOY MODIFIED BY NANO-SIZED CARBON ADDITIVE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2020)
- M. BELOTSERKOVSKY, I. TARAN, P. KOT, A. DUDAN, TECHNOLOGY FOR OBTAINING AND TRIBOTECHNICAL CHARACTERISTICS OF OXIDIZED ALUMINUM COATINGS APPLIED TO POLYMERS , Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)