RESTORATION OF DETAILS OF CARS TAKING INTO ACCOUNT INFLUENCE OF HEATPHYSICAL AND MECHANICAL PROPERTIES OF MATERIALS
Article Sidebar
Main Article Content
Abstract
In work theoretical researches during which dependences of size of axial deformation of elements of the restored detail on the module of elasticity, temperatures of heating and temperature coefficient of linear expansion of material of the restored product and the material used for their restoration are received are conducted. The received dependences allow to predict the stretching tension in the applied material. Also there is an opportunity to determine shortening of a shaft in case of its restoration by a overlaying and the size of width of a crack which is able to pull together the welded seam put with the chosen material. The offered way of tea leaves of cracks cross seams gives such advantages as an exception of heating of preparation, cutting, spotting of the ends of cracks and the subsequent machining of seams, provides the greatest tightness, pulls together a crack due to the increased longitudinal shrinkage of welded seams; gives firmness against formation of cold and hot cracks.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Кастрюк, А.П. Устранение сваркой трещин в корпусных деталях / А.П. Кастрюк // Инновационные технологии, автоматизация и мехатроника в машино- и приборостроении: тез. науч.-практ. семинара, Минск, 10–13 апр. 2012 г.). – Минск: БНТУ. – 2012. – С. 104–105.
Иванов, В.П. Ремонт машин. Технология, оборудование, организация: учебник / В.П. Иванов. – 2-е изд. перераб. и доп. – Новополоцк: УО «ПГУ», 2006. – 448 с.
Вигерина, Т.В. Влияние наплавки на длину коленчатого вала при восстановлении / Т.В. Вигерина // Вестн. БНТУ. – 2011. – № 6. – С. 14–18.
Кастрюк, А.П. Ресурсосбережение и качество ремонта агрегатов машин с восстановлением их деталей: науч. изд. / А.П. Кастрюк, Т.В. Вигерина. – Новополоцк: ПГУ, 2012. – 199 с.
Most read articles by the same author(s)
- M. BELOTSERKOVSKY, А. SOSNOVSKY, D. TRUSOV, A. YALOVIK, A. DUDAN, PECULIARITIES OF RESTORING DETAILS BY METHODS OF METALIZATION USING COMPOSITE POWDER WIRE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- R. LAGEREV, D. KAPSKI, V. IVANOV, T. VIGERINA, MANAGEMENT OF THE ENTRY FLOW OF CARS ON HIGH-SPEED ROADS OF THE HIGHEST CATEGORY, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- Y. VOLKOV, V. LOPATA, T. VIGERINA, M. AGEEV, RESTORATION OF TREES DIESEL-GENERATORS ELECTROCONTACT SINTERING DISCRETE COATING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- V. SENYUT, V. ZHORNIK, A. PARNITSKY, E. MOSUNOV, A. DUDAN, THERMOBARIC SINTERING OF DIAMOND MICROPOWDERS MODIFIED BY SILICON AND TITANIUM, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- A. KASTRUK, A. DUDAN, T. VIGERINA, IMPROVEMENT OF TECHNOLOGY TRAINING OF RECONSTRUCTION OF DETAILS DUE TO THEIR CLASSIFICATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- V. NICOLAICHUK, A. DUDAN, E. KOZHEVNIKOVA, L. LOPATA, DETERMINING THE OPTIMAL TIMING OF THE ELECTROCONTACT SINTERING PROCESS FOR POWDER COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- M. BELOTSERKOVSKY, A. SOSNOVSKY, A. YALOVIK, A. DUDAN, ESTIMATION OF USE THE HYPERSONIC METALLIZATION TO RESTORATION OF HYDRAULIC SYSTEMS ELEMENTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- A. DUDAN, A. HUSHCHA, METHODS AND MEANS TRIBOMODIFITSIROVANIYA FRICTION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)