ESTIMATION OF USE THE HYPERSONIC METALLIZATION TO RESTORATION OF HYDRAULIC SYSTEMS ELEMENTS

Article Sidebar

Abstract views: 34
PDF Downloads: 12
pdf (rus) (Русский)
Published: Aug 27, 2015

Main Article Content

M. BELOTSERKOVSKY
The Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk
A. SOSNOVSKY
The Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk
A. YALOVIK
JSC "Neftezavodmontazh", Novopolotsk
A. DUDAN
Polotsk State University

Abstract

The article describes the results of studies of chromium plating by hypersonic metallization. The possibilities of using powder composite wires and wires of cast steels was shown. It is proposed to replace the process of galvanic chrome plating on the technology of hypersonic metallization.

Article Details

How to Cite
BELOTSERKOVSKY, M., SOSNOVSKY, A., YALOVIK, A., & DUDAN, A. (2015). ESTIMATION OF USE THE HYPERSONIC METALLIZATION TO RESTORATION OF HYDRAULIC SYSTEMS ELEMENTS. Vestnik of Polotsk State University. Part B. Industry. Applied Sciences, (11), 36-42. Retrieved from https://journals.psu.by/industry/article/view/5557
Issue
No. 11 (2015)
Section
Machine-building and theoretical engineering
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Author Biographies

M. BELOTSERKOVSKY, The Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk

д-р техн. наук, доц.

A. SOSNOVSKY, The Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk

канд. техн. наук

A. DUDAN, Polotsk State University

канд. техн. наук, доц.

References

Черепко, А.Е. Технологии гиперзвуковой металлизации / А.Е. Черепко, М.А. Белоцерковский, А.С. Прядко // Механика-2011: сб. науч. докл. V Белорус. конгр. по теорет. и прикладной механике, 26–28 окт. 2011 г.: в 2 т.; Объед. ин-т машиностроения НАН Беларуси; редкол.: М.С. Высоцкий [и др.]. – Минск, 2011. – Т. 2. – С. 138–143.

Опыт применения гиперзвуковой металлизации для изготовления деталей карьерных самосвалов / М.А. Белоцерковский [и др.] // Композиционные материалы и защитные покрытия: сб. материалов междунар. науч.-техн. семинара, Минск, 27 нояб. 2012 г.; Объед. ин-т машиностроения НАН Беларуси; редкол.: А.А. Дюжев [и др.]; под общ. ред. П.А. Витязя. – Минск: ОИМ НАН Беларуси, 2012. – С. 211–214.