ESTIMATION OF USE THE HYPERSONIC METALLIZATION TO RESTORATION OF HYDRAULIC SYSTEMS ELEMENTS
Article Sidebar
Main Article Content
Abstract
The article describes the results of studies of chromium plating by hypersonic metallization. The possibilities of using powder composite wires and wires of cast steels was shown. It is proposed to replace the process of galvanic chrome plating on the technology of hypersonic metallization.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Черепко, А.Е. Технологии гиперзвуковой металлизации / А.Е. Черепко, М.А. Белоцерковский, А.С. Прядко // Механика-2011: сб. науч. докл. V Белорус. конгр. по теорет. и прикладной механике, 26–28 окт. 2011 г.: в 2 т.; Объед. ин-т машиностроения НАН Беларуси; редкол.: М.С. Высоцкий [и др.]. – Минск, 2011. – Т. 2. – С. 138–143.
Опыт применения гиперзвуковой металлизации для изготовления деталей карьерных самосвалов / М.А. Белоцерковский [и др.] // Композиционные материалы и защитные покрытия: сб. материалов междунар. науч.-техн. семинара, Минск, 27 нояб. 2012 г.; Объед. ин-т машиностроения НАН Беларуси; редкол.: А.А. Дюжев [и др.]; под общ. ред. П.А. Витязя. – Минск: ОИМ НАН Беларуси, 2012. – С. 211–214.
Most read articles by the same author(s)
- M. BELOTSERKOVSKY, ANALYTICAL ASSESSMENT OF NECESSARY PARAMETERS FLAME JET DURING DEPOSITION OF POLYMER COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- M. M., A. SOSNOVSKIY, A. GRIGORCHIK, A. ELOVIC, A. DUDAN, FEATURES OF COATINGS OF PSEUDOPLANES METHOD OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- V. ZHORNIK, S. KOVALEVA, M. BELOTSERKOVSKY, P. VITYAZ, T. GRIGORYEVA, A. DUDAN, INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DUDAN, A. RUTKOVSKY, M. AHIEIEV, V. MIRNENKO, Т. SMYRNOVА, O. RADKO, INCREASING THE STRENGTH PROPERTIES OF SURFACES OF STEEL PARTS VACUUM THERMOCYCLIC NITROGENIZATION IN PLASMA OF PULSATING GREAT DISCHARGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- M. BELOTSERKOVSKY, THE STUDY OF THE FORMATION OF COATINGS OF PSEUDOPLANES HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DUDAN, V. LOPATA, V. KALINICHENKO, A. LOPATA, T. IVCHENKO, A. GRISHENKO, USE OF WORKING BODIES WITH DISCRETE COVERINGS TO INCREASE THE EFFICIENCY OF GRAIN CRUSHING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- M. BELOTSERKOVSKY, V. ZHORNIK, A. YALOVIK, A. DUDAN, RESTORATION OF SHAFTS BY COVERING WITH COMBINED COATINGS BY THE MEANS OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. ZHORNIK, M. BELOTSERKOVSKY, A. YALOVIK, A. DUDAN, SELECTING THE COMPOSITION OF THE APPLICATION COMPOSITION AND DETERMINING THE REGIMES OF TRIBOMECHANICAL PROCESSING OF STEEL GAS-THERMAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. ZHORNIK, A. IVAKHNIK, A. DUDAN, A. HUSHCHA, STRUCTURE AND PROPERTIES OF THE CALCIUM SULFONATE BASED GREASE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)