ESTIMATION OF USE THE HYPERSONIC METALLIZATION TO RESTORATION OF HYDRAULIC SYSTEMS ELEMENTS
Article Sidebar
Main Article Content
Abstract
The article describes the results of studies of chromium plating by hypersonic metallization. The possibilities of using powder composite wires and wires of cast steels was shown. It is proposed to replace the process of galvanic chrome plating on the technology of hypersonic metallization.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Черепко, А.Е. Технологии гиперзвуковой металлизации / А.Е. Черепко, М.А. Белоцерковский, А.С. Прядко // Механика-2011: сб. науч. докл. V Белорус. конгр. по теорет. и прикладной механике, 26–28 окт. 2011 г.: в 2 т.; Объед. ин-т машиностроения НАН Беларуси; редкол.: М.С. Высоцкий [и др.]. – Минск, 2011. – Т. 2. – С. 138–143.
Опыт применения гиперзвуковой металлизации для изготовления деталей карьерных самосвалов / М.А. Белоцерковский [и др.] // Композиционные материалы и защитные покрытия: сб. материалов междунар. науч.-техн. семинара, Минск, 27 нояб. 2012 г.; Объед. ин-т машиностроения НАН Беларуси; редкол.: А.А. Дюжев [и др.]; под общ. ред. П.А. Витязя. – Минск: ОИМ НАН Беларуси, 2012. – С. 211–214.
Most read articles by the same author(s)
- О. MIKOSYANCHIK, В. LYASHENKO, N. KUZІN, A. DUDAN, SELECTION OF THE OPTIMAL PARAMETERS OF THE SURFACE LAYERS OF THE STRUCTURE TRIBOSYSTEMS TAKING INTO ACCOUNT THE MECHANICAL PROPERTIES OF THE GRADIENT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- V. KOSTRITSKI, A. LISOVSKI, A. DUDAN, CREATING MICRORELIEF ON THE INNER SURFACE OF THE CYLINDER LINER BY LASER RADIATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- A. GRIGORCHIK, V. KUKAREKO, M. BELOTSERKOVSKY, A. BELY, THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF SPUTTERING AND ION NITRIDING ON MICROSTRUCTURE AND WEAR RESISTANCE OF GAS-THERMAL COATING OF HIGH CHROMIUM STEEL 95X18, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- V. ZHORNIK, S. KOVALIOVA, N. KHOMICH, T. GRIGORIEVA, A. DUDAN, S. GRIGORIEV, FORMATION OF COMPOSITE POWDERS OF SYSTEMS Fe–SiC AND Fe–B4C BY MECHANICAL SYNTHESIS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- M. BELOTSERKOVSKY, А. SOSNOVSKY, D. TRUSOV, A. YALOVIK, A. DUDAN, PECULIARITIES OF RESTORING DETAILS BY METHODS OF METALIZATION USING COMPOSITE POWDER WIRE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- M. BELOTSERKOVSKY, I. SOSNOVSKY, A. KURILYONOK, O. KUZNECHIK, MODELING OF THE PROCESS OF INDUCTION WELDING POWDER SURFACES CONTAINING NANODIMENTIONAL MODIFIERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- V. SENYUT, V. ZHORNIK, A. PARNITSKY, E. MOSUNOV, A. DUDAN, THERMOBARIC SINTERING OF DIAMOND MICROPOWDERS MODIFIED BY SILICON AND TITANIUM, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- M. BELOTSERKOVSKY, A. SOSNOVSKY, D. TRUSSOV, A. YALOVIK, ASSESSMENT OF ALLOWED HEATING TEMPERATURES OF CYLINDRICAL PARTS DURING DEPOSITION OF THE METAL COATING BY HYPERSONIC METALLIZATION USING MAF GAS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2016)
- A. KASTRUK, A. DUDAN, T. VIGERINA, IMPROVEMENT OF TECHNOLOGY TRAINING OF RECONSTRUCTION OF DETAILS DUE TO THEIR CLASSIFICATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- V. NICOLAICHUK, A. DUDAN, E. KOZHEVNIKOVA, L. LOPATA, DETERMINING THE OPTIMAL TIMING OF THE ELECTROCONTACT SINTERING PROCESS FOR POWDER COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)