STRUCTURE AND PROPERTIES OF THE CALCIUM SULFONATE BASED GREASE
Article Sidebar
Main Article Content
Abstract
The article presents the features of the structure of dispersed phase and properties of the complex calcium sulfonate grease prepared on base of chemically synthesized nanosized particles of the crystalline modification of calcium carbonate (calcite). The promising fields of application of developed grease are shown.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
V. ZHORNIK, The Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk
д-р техн. наук, доц.
A. IVAKHNIK, The Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk
канд. техн. наук
A. DUDAN, Polotsk State University
канд. техн. наук, доц.
References
Жорник, В.И. Влияние твердых наноразмерных добавок на структуру пластичной смазки и механизм изнашивания поверхности трения / В.И. Жорник, А.В. Ивахник, В.П. Ивахник // Механика машин, механизмов и материалов. – 2010. – № 3(12). – С. 85–92.
Трибологические характеристики смазок с нанопорошками дихалькогенидов молибдена и вольфрама / К.Э. Гринкевич [и др.] // Смазочные материалы: тез. 9-й междунар. науч.-техн. конф., Бердянск, 4–8 сент. 2006 г. – Львов: Изд. Нац. ун-та «Львiвська полiтехнiка», 2006. – С. 22–24.
Смазочные масла и смазки, содержащие наночастицы: заявл. WO2006119502 США, МПК7 C10M159/24 / J.A. Waynick; заявитель Южно-западный НИИ; заявл. 03.05.2006; опубл. 09.11.2006 // Изобретение стран мира. – 2007. – № 11(44). – С. 32.
Химический принцип модифицирования пластичных смазочных материалов наноразмерными добавками / В.И. Жорник [и др.] // Актуальные вопросы машиноведения: сб. науч. тр., 2014. – Вып. 3. – С. 282–284.
Плескачевский, Ю.М. Структурные аспекты формирования дисперсной фазы пластичных смазок / Ю.М. Плескачевский, Л.В. Маркова, А.В. Ивахник // Проблемы химмотологии: материалы докл. I Междунар. науч.-техн. конф., Киев, 15–19 мая 2006 г.; Нац. авиац. ун-т. – Киев: Книж. изд-во НАУ, 2006. – С. 280–282.
Препарирование пластичных смазок для исследования их структурного каркаса методом сканирующей электронной микроскопии / В.А. Чекан [и др.] // Заводская лаборатория. Диагностика материалов. – 2005. – № 8. – С. 36–38.
Macwood, W. Calcium Sulfonate Grease / W. Macwood, R. Muir // NLGI Spokesman, Journal of the National Lubricating Grease Institute. – 1999. – № 5. – Р. 58–63.
Most read articles by the same author(s)
- V. ZHORNIK, COMPOSITE MATERIALS WITH BIMODAL STRUCTURE BASED ON MICRO- AND NANOPOWDERS OF DIAMOND, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- S. PILIPENKO, V. TERESHCHENKO, A. DUDAN, INFLUENCE OF COLD PIPE ROLLING PARAMETERS TO CHANGE THE WALL THICKNESS ALONG THE CONF OF DEFORMATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- M. M., A. SOSNOVSKIY, A. GRIGORCHIK, A. ELOVIC, A. DUDAN, FEATURES OF COATINGS OF PSEUDOPLANES METHOD OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- V. ZHORNIK, S. KOVALEVA, M. BELOTSERKOVSKY, P. VITYAZ, T. GRIGORYEVA, A. DUDAN, INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DUDAN, A. RUTKOVSKY, M. AHIEIEV, V. MIRNENKO, Т. SMYRNOVА, O. RADKO, INCREASING THE STRENGTH PROPERTIES OF SURFACES OF STEEL PARTS VACUUM THERMOCYCLIC NITROGENIZATION IN PLASMA OF PULSATING GREAT DISCHARGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- A. DUDAN, V. LOPATA, V. KALINICHENKO, A. LOPATA, T. IVCHENKO, A. GRISHENKO, USE OF WORKING BODIES WITH DISCRETE COVERINGS TO INCREASE THE EFFICIENCY OF GRAIN CRUSHING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- M. BELOTSERKOVSKY, V. ZHORNIK, A. YALOVIK, A. DUDAN, RESTORATION OF SHAFTS BY COVERING WITH COMBINED COATINGS BY THE MEANS OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. ZHORNIK, M. BELOTSERKOVSKY, A. YALOVIK, A. DUDAN, SELECTING THE COMPOSITION OF THE APPLICATION COMPOSITION AND DETERMINING THE REGIMES OF TRIBOMECHANICAL PROCESSING OF STEEL GAS-THERMAL COATINGS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)
- О. MIKOSYANCHIK, В. LYASHENKO, N. KUZІN, A. DUDAN, SELECTION OF THE OPTIMAL PARAMETERS OF THE SURFACE LAYERS OF THE STRUCTURE TRIBOSYSTEMS TAKING INTO ACCOUNT THE MECHANICAL PROPERTIES OF THE GRADIENT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)