CONTROL OF HEAT AND COOLING FLOWS IN RAPID MACHINING OF INCOMPLETE SPHERICAL SURFACES OF MACHINE PARTS
Article Sidebar
Main Article Content
Abstract
Combined rapid machining of incomplete spherical surfaces of parts is considered, formulas for calculating the cutting temperature taking into account the angle of contact between the tool and the workpiece are derived, the results of experimental studies of the temperature of the part and chips depending on the processing time, as well as modeling of cooling air flows in the tool and the cutting zone are presented.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Khmel'nitskii, R.S. (2007). Issledovanie protsessa obrabotki sfericheskikh poverkhnostei detalei sposobom okhvatyvayushchego frezerovaniya [Study of the process of processing spherical surfaces of parts using the method of enveloping milling]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya V. Promyshlennost'. Prikladnye nauki [Herald of Polotsk State University. Series B. Industry. Applied Science], 8, 53–58. (In Russ., abstr. in Engl.)
Karslou, G. & Eger, D. (1964). Teploprovodnost' tverdykh tel [Conduction of heat in solids]. Moscow: Nauka. (In Russ.)
Bogdanova, E.A. (1983). Raschet temperaturnogo polya v tsilindricheskoi detali pri tortsevom rotatsionnom tochenii. Nekotorye voprosy differentsial'nykh uravnenii v reshenii prikladnykh zadach (79–81). Tula: Tul'skii politekhnicheskii institut. (In Russ.)
Reznikov, A.N. (1981). Teplofizika protsessov mekhanicheskoi obrabotki materialov. – Moscow: Mashinostroenie. (In Russ.)
Popok, N.N., Khmel'nitskii, R.S., Anisimov, V.S. & Gvozd', G.I. (2017). Kompleksnye issledovaniya fizicheskikh i tekhnologicheskikh kharakteristik protsessa obrabotki sfericheskikh poverkhnostei detalei [Complex studies of physical and technological characteristics of the process of processing spherical surfaces of parts]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya V. Promyshlennost'. Prikladnye nauki [Herald of Polotsk State University. Series B. Industry. Applied Science], 2(55), 87–97. (In Russ., abstr. in Engl.)
Most read articles by the same author(s)
- N. POPOK, A. FRIK, ANALYSIS OF THERMOCOUPLES FOR MEASURING TEMPERATURE IN RUBBER MIXERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, N. BELYAKOV, AUTOMATED SELECTION SYSTEM FOR MEASURING GEOMETRIC VALUES FOR TECHNOLOGICAL PREPARATION OF ADDITIVE AND SUBTRACTIVE ENGINEERING INDUSTRIES DETAILS OF COMPLEX SHAPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- N. POPOK, N. BELYAKOV, D. YASNEV, DECISION SUPPORT SYSTEM FOR BASING MODELS OF MACHINE PARTS IN THE WORKING AREA OF 3D-PRINTERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2022)
- N. POPOK, A. BALYSH, NON-WELDED SEALED FITTINGS FOR SMALL DIAMETER PIPELINES AND TUBING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, V. ANISIMOV, KINEMATICS OF PROCESSING SURFACES OF PARTS WITH A ROTATING CUTTING TOOL WITH A TANGENT MOVEMENT OF THE CUTTING EDGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- N. POPOK, N. BELYAKOV, Y. MAKHARINSKY, D. LATUSHKIN, PRACTICAL APPLICATION OF BASING THEORY FOR SYNTHESIS UNIVERSAL-PREFABRICATED DEVICES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- N. POPOK, N. BELYAKOV, V. YANOVICH, DIMENSIONAL ADJUSTMENT DECISION SUPPORT SYSTEM END MILLS FOR PROGRAMMING MACHINING ON CNC MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- N. POPOK, N. BELYAKOV, S. SELEZNEV, B. BAZROV, CLASSIFIER OF STRUCTURAL AND TECHNOLOGICAL ELEMENTS WITH BOUNDARIES OF TRANSITION ZONES FOR PROCESSING PROGRAMMING ORIGINAL NON-ROUND PARTS ON CNC MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2025)
- N. POPOK, V. ANISIMOV, DEFORMATION AND CHIP FORMATION WHEN PROCESSING FLAT AND CURVED SURFACES OF PARTS WITH A ROTATING CUTTING TOOL ON CNC LATHES AND MILLING MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2020)
- N. POPOK, S. PORTYANKO, E. TIKHON, TECHNOLOGY FOR DESIGNING BLOCK-MODULAR CUTTING TOOLS USING 3D-PRINTING OF MODELS PLASTIC MATERIALS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)