RESOURCE-SAVING RUN-IN OF INTERNAL COMBUSTION ENGINES AT USE OF OIL MODIFYING ADDITIVES
Article Sidebar
Main Article Content
Abstract
Using the example of the cold stage of running-in of a D-245 diesel engine on a running-brake stand KI-2139B at a crankshaft speed of the engine being run in within 700±10 min–1, it was established that the use of additives to lubricating oils allows reducing the break-in time by 1,5 times. Cold running-in of diesel engines at a repair facility using M-10G2 oil with the SURM KV additive containing 3,2–3,4% at a supply oil temperature of 55–65 °C requires a duration of 60 minutes. The use of the SURM KV additive makes it possible to obtain compression pressures during cold running that are the same as during hot running at idle using the basic technology. The exclusion of the hot running-in mode at idle speed from the technological process of running-in diesel engines is justified. The economic effect of introducing special additives into the lubricant during running-in of internal combustion engines is to reduce its time and reduce fuel consumption.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Yaroshevich, V.K., Savich, A.S. & Ivanov, V.P. (2011). Tekhnologiya proizvodstva i remonta avtomobilei. Minsk: Adukatsyya i vykhavanne. (In Russ.)
Nikiforov, A.D., Kovshov, A.N. & Nazarov, Yu.F. (2007). Vysokie tekhnologii razmernoi obrabotki v mashinostroenii. Moscow: Vysshaya shkola. (In Russ.)
Strel'tsov, V.V. (2995). Resursosberegayushchaya uskorennaya obkatka otremontirovannykh dvigatelei. Moscow: Kolos. (In Russ.)
Bednarskii, V.V. (2005). Organizatsiya kapital'nogo remonta avtomobilei. Rostov-on-Don: Feniks. (In Russ.)
Vityaz', P.A., Kozhuro, L.M., Il'yushchenko, A.F., Devoino, O.G. & Kardapolova, M.A. (2006). In P.A. Vityaz' (Ed.) Struktura i svoistva iznosostoikikh pokrytii. Minsk: Belorusskii gosudarstvennyi agrarnyi tekhnicheskii universitet. (In Russ.)
Ledus, R., Vaerman, J., Craecker, R. De & Brille, G. De. (2005). Etude experementale des relations entre ffottement et usure dans moteurs a combustion interne. Ann. Inst. Beige petrole, (4), 9–15.
Most read articles by the same author(s)
- V. IVANOV, A. KUL'BEY, A. BONDAREV, EVALUATION AND USE OF RESIDUAL RESOURCE EQUIPMENT FOR A PETROCHEMICAL COMPLEX, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- D. KAPSKY, D. LEVANOVIC, V. IVANOV, A. GOLOVNICH, ANALYSIS OF DETECTING TRAFFIC PARAMETERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2022)
- V. IVANOV, REPAIR OF METAL STRUCTURES OF ENTERPRISES PETROCHEMICAL COMPLEX, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- V. IVANOV, PRESENTATION IN THE OF PROVISIONS MADE ON DEFENSE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2023)
- V. IVANOV, STRUCTURAL ELEMENTS OF THE THESIS (content, sequence of presentation, connections and relationships), Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- V. IVANOV, V. LYALYAKIN, V. DRONCHENKO, PROTECTION OF THE ENVIRONMENT FROM OILY WASTE CONTAINING DIESEL FUEL AND FUEL OIL, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- D. KAPSKIY, A. GOLOVNICH, T. VIGERINA, V. KUZMENKO, A. KRASILNIKOVA, Ye. GORELIK, S. SEMCHENKOV, Ye. KOT, DEVELOPMENT OF URBAN TRANSPORT IN THE CITIES OF POLOTSK AND NOVOPOLOTSK, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- V. IVANOV, T. VIGERINA, DIRECTIONS FOR IMPROVING STUDENT TRAINING FOR THE SPECIALTY «TECHNICAL MAINTENANCE OF VEHICLES», Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- V. IVANOV, COMPOSITION CENTERS IN PRODUCTION CASES LAYOUT MOTOR TRANSPORTATION COMPANIES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2021)
- V. FRUCKI, T. VIGERINA, V. KOSTRITSKI, RESTORATION OF TYPE “SHAFT” PARTS BY THE COMBINED EFFECTS OF THE COATING MATERIAL, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2017)