THE EFFECT OF HIGHLY DISPERSED ZEOLITE ON THE STRENGTH AND DIFFUSION-SORPTION PROPERTIES OF POLYOLEFINS
Article Sidebar
Main Article Content
Abstract
The paper investigates the strength properties of polyolefins (LDPE and HDPE) filled with highly dispersed zeolite particles. It has been found that an increase in the filler content leads to an increase in tensile stress at rupture. The heterogeneity manifests itself in the destruction of all standard injection molding samples without exception during stretching in the part of the working area that is as far away from the gate as possible. The reasons for the rupture, the decrease in strength and the uneven tensile strength along the length of the injection molding samples are explained.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Manin, V.N., Fatoev, I.I., Patrikeev, G.A. i dr. (1985). Otsenka makroneodnorodnostinorplastov metodom kraevogo nadreza. Plasticheskie massy, (9), 36–38. (In Russ.)
Fatoev, I.I., Manin, V.N., Veselov, A.V., Sal'nikova, V.N., Patrikeev, G.A., Abramov, V.V. … Kondratov, A.P. (1986). Plasticheskie massy, (7), 36–38. (In Russ.)
Fatoev, I.I. & Kondratov, A.P. (2001). Defektnost' struktury lit'evykh polimernykh izdelii. Nauchnyi vestnik Bukharskogo gosuniversiteta, (4), 53–57. (In Russ., abstr. in Engl.)
Kalinchev, E.L. (1978). Plastcheskie massy, (1), 12–17. (In Russ.)
Manin, V.N., Gromov, A.N. & Grigor'ev, V.P. (1986). Defektnost' i ekspluatatsionnye svoistva polimernykh materialov. Leningrad: Khimiya. (In Russ.)
Morozova, S.P., Fridman, M.L., Abramov, V.V., Simonov-Emel'yanov, I.D. & Zinchenko, S.A. (1979). Orientatsionnye effekty i struktura lit'evykh izdelii iz poliolefinov. Plasticheskie massy, (9), 39–42. (In Russ.)
Natov, M.A. & Mitsulov, A.I. (1983). O nadmolekulyarnoi strukture. Vysokomolekulyarnye soedineniya. Seriya A, 25(6), 1140–1148. (In Russ., abstr. in Engl.)
Akutin, M.S., Abramov, V.V., Soiref, D.A., Valiotti, N.N. & Paverman, N.G. (1984). Molekulyarno-massovye kharakteristiki PEND pri lit'e pod davleniem. Plasticheskie massy, (12), 29–30. (In Russ.)
Budtov, V.P., Lopatin, A.K. & Tikhonova, G.P. (1985). Mekhanizm relaksatsionnykh protsessov v mikroob"emakh lit'evykh izdelii iz polietilena vysokoi plotnosti. Vysokomolekulyarnye soedineniya. Seriya A, 27(1), 144–155. (In Russ., abstr. in Engl.)
Tikhonova, G.P., Shekhtmeister, I.E., Gol'denberg, A.L, & Leosko, E.A. (1981). Vliyanie molekulyarnykh kharakteristik na strukturu lit'evykh izdelii iz PEND. Plasticheskie massy, (10), 39–40. (In Russ.)
Kalinchev, E.L. & Katsevman, M.M. (1976). Sovremennye problemy khimii i khimicheskoi promyshlennosti, vypusk 10(35). Moscow: NIITEKhIM. (In Russ.)
Fatoev, I.I., Nazarov, D. & Sitamov, S. (1991). Vliyanie mnogokratnoi pererabotki na svoistva vysokonapolnennogo PEVP. Plasticheskie massy, (7), 40–41. (In Russ.)
Nel'sen, L. (1978). Mekhanicheskie svoistva polimerov i polimernykh kompozitsii. Moscow: Khimiya. (In Russ.)
Lipatov, Yu.S., Fainerman, A.E. & Anokhin, O.V. (1976). O roli mezhfaznykh yavlenii v formirovanii smesei polimerov. Doklady AN SSSR, 231(2), 381–384. (In Russ., abstr. in Engl.)
Summ, B.D. & Goryunov, Yu.V. Fiziko-khimicheskie osnovy smachivaniya i rastekaniya. Moscow: Khimiya. (In Russ.)
Bukhina, M.F. (1973). Kristallizatsiya kauchukov i rezin. Moscow: Khimiya. (In Russ.)
Malinskii, Yu.M., Epel'baum, I.V., Titova, N.M. & Kargin, V.A. (1968). Osobennosti strukturoobrazovaniya v tonkikh polimernykh plenkakh. Vysokomolekulyarnye soedineniya. Seriya A, 10(4), 786–798. (In Russ., abstr. in Engl.)
Malinskii, Yu.M. (1970). O vliyanii tverdoi poverkhnosti na protsess relaksatsii i strukturoobrazovaniya v pristennykh sloyakh polimerov. Uspekhi khimii, 39(8), 1511–1535. (In Russ., abstr. in Engl.)
Simonov-Emel'yanov, I.D., Kuleznev, V.N. & Trofimicheva, L.Z. (1989). Vliyanie razmera chastits napolnitelya na nekotorye kha-rakteristiki polimerov. Plasticheskie massy, (5), 61–64. (In Russ.)
Lipatov, Yu.S. (1991). Fiziko-khimicheskie osnovy napolneniya polimerov. Moscow: Khimiya. (In Russ.)
Lipatov, Yu.S., Fabulyak, F.G. & Sergeeva, L.M. (1968). Opredelenie velichiny svobodnogo ob”ema pri temperature steklovaniya iz dannykh po vremenam ob”emnoi relaksatsii. Vysokomolekulyarnye soedineniya. Seriya В, 10(7), 527–529. (In Russ., abstr. in Engl.)
Kalinchev, E.L. & Sakovtseva M.V. (1983). Svoistva i pererabotka termoplastov. Leningrad: Khimiya. (In Russ.)
Fatoev, I.I., Veselov, A.V. & Sal'nikova, V.N. Sopostavitel'nyi analiz struktury i svoistv uprochnennykh i neuprochnennykh polimernykh materialov. Kompozitsionnye i polimernye materialy. Struktura, svoistva i tekhnologii polucheniya (148–154). Tashkent: UzRNTK «Fan va tarakkiet». (In Russ.)
Dzheil, F.Kh. (1968). Polimernye monokristally. Leningrad: Khimiya. (In Russ.)
Shlyapnikov, Yu.A. (1997). Rol' topologicheskogo besporyadka v fiziko-khimii polimerov. Uspekhi khimii polimerov, 66(11), 1064–1076. (In Russ., abstr. in Engl.)
Tager, A.A., Askadskii, A.A. & Tsilipotkina, M.V. (1975). Vysokomolekulyarnye soedineniya. Seriya A, (17), 1346–1351. (In Russ., abstr. in Engl.)
Most read articles by the same author(s)
- K. MAYOROVA, K. ANTUKH, A. UTKIN, I. BURAYA, V. BAKUNIN, А. YERMAK, ASSESSMENT OF SUCCINIMIDE ADDITIVES FOR LUBRICATING OILS DISPERCING ACTIVITY, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2021)
- V. LENCHIKOV, D. DABRAVOLSKI, A. UTKIN, I. BURAYA, A. YERMAK, INFLUENCE OF CARBOXYLIC ACIDS ON FILTERABILITY AND QUALITY LEVEL OF SYNTHETIC LOW ALKALINE CALCIUM SULFONATE (DETERGENT-DISPERSANT MOTOR OIL ADDITIVE), Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2021)
- А. YERMAK, I. BURAYA, A. SPIRIDONOV, Е. SYUBAREVA, I. KOVALYOVA, METHODS OF REGULATING THE CLOUD POINT OF DIESEL FUELS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DOSHCHONOK, K. MAYOROVA, I. BURAYA, INFLUENCE OF THE STRUCTURE OF HIGHER AMINES ON THE PROPERTIES OF SUCCINIMIDE TYPE ADDITIVES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- A. FAKEYEU, S. POKROVSKAYA, I. BURAYA, K. ANTUH, D. NIKOLIN, SYNTHESIS AND INVESTIGATION OF THE FUNCTIONAL PROPERTIES OF HIGH-QUALITY ABSOLUTELY SUFFICIENT SUKCINIMIDE ADDITIVES FOR THE LOW-SAPS MOTOR OILS PRODUCTION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- А. YERMAK, S. POKROVSKAYA, I. BURAYA, Е. SYUBAREVA, A. ZAVADSKIY, THE PROPERTIES AND PROMISING AREAS OF PROCESSING RESIDUAL PRODUCT OF THE PROCESS “UNICRACKING”, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- S. FOZILOV, A. ZOIROVA, Kh. FOZILOV, S. TUROBZHONOV, PRODUCTION OF HIGHER FATTY ALCOHOLS BASED ON LOW MOLECULAR WEIGHT POLYETHYLENE AND ANALYSIS OF THEIR LUBRICATING PROPERTIES FOR DIESEL FUELS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)