UNIVERSALIZATION OF ROTATING CUTTING TOOLS BASED ON UNIFIED CONSTRUCTION MODULES
Article Sidebar
Main Article Content
Abstract
The purpose of the work is to increase the productivity of surface treatment of parts by universalizing cutters. To achieve the goal, the problems of developing designs of end and disk cutters with interchangeable cutting blocks and clamping modules and studying their performance are solved. Analytical and experimental research methods are used, which made it possible to establish the geometric parameters of the cut layer during end and peripheral milling, the dependence of the chip shrinkage coefficients, cutting power and roughness of the machined surface when changing the feed, depth and cutting speed. The research results can be used in machining flat and curved surfaces of parts on CNC machines.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Maklorens, E. (2006). Mnogotselevye stanki. Mirovaya metalloobrabotka, (2), 12–13. (In Russ.).
Cherpakov, B.I. (2003). Tendentsii razvitiya mirovogo stankostroeniya v nachale XXI veka. STIN, (9), (3–7). (In Russ.).
Cherpakov, B.I. (2003). Tendentsii razvitiya mirovogo stankostroeniya v nachale XXI veka. STIN, (10), (3–7). (In Russ.).
Rusetskii, A.M. (2014). Konstruirovanie i osnashchenie tekhnologicheskikh kompleksov. Minsk: Belpruskaya navuka. (In Russ.).
Dal'skii, A.M., Kosilovа, A.G., Meshcheryakov, R.K. & Suslov, A.G. (Eds.). (2001). Spravochnik tekhnologa mashinostroitelya. V 2 t. T. 2. Moscow: Mashinostroenie. (In Russ.).
Most read articles by the same author(s)
- N. POPOK, A. FRIK, ANALYSIS OF THERMOCOUPLES FOR MEASURING TEMPERATURE IN RUBBER MIXERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, N. BELYAKOV, AUTOMATED SELECTION SYSTEM FOR MEASURING GEOMETRIC VALUES FOR TECHNOLOGICAL PREPARATION OF ADDITIVE AND SUBTRACTIVE ENGINEERING INDUSTRIES DETAILS OF COMPLEX SHAPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- N. POPOK, N. BELYAKOV, D. YASNEV, DECISION SUPPORT SYSTEM FOR BASING MODELS OF MACHINE PARTS IN THE WORKING AREA OF 3D-PRINTERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2022)
- N. POPOK, V. ANISIMOV, KINEMATICS OF PROCESSING SURFACES OF PARTS WITH A ROTATING CUTTING TOOL WITH A TANGENT MOVEMENT OF THE CUTTING EDGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- N. POPOK, A. BALYSH, NON-WELDED SEALED FITTINGS FOR SMALL DIAMETER PIPELINES AND TUBING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- N. POPOK, N. BELYAKOV, V. YANOVICH, DIMENSIONAL ADJUSTMENT DECISION SUPPORT SYSTEM END MILLS FOR PROGRAMMING MACHINING ON CNC MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- N. POPOK, N. BELYAKOV, Y. MAKHARINSKY, D. LATUSHKIN, PRACTICAL APPLICATION OF BASING THEORY FOR SYNTHESIS UNIVERSAL-PREFABRICATED DEVICES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- N. POPOK, V. ANISIMOV, DEFORMATION AND CHIP FORMATION WHEN PROCESSING FLAT AND CURVED SURFACES OF PARTS WITH A ROTATING CUTTING TOOL ON CNC LATHES AND MILLING MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2020)
- S. ABRAMENKO, V. ANISIMOV, K. KORBA, SOFTWARE AND HARDWARE COMPLEX FOR MEASUREMENT, REGISTRATION AND FOLLOWING PROCESSING OF PROCESSES PROCESSING AT HIGH-SPEED MECHANICAL PROCESSING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2021)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, PROCESSING TECHNOLOGY FOR PARTIAL SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)