DIMENSIONAL ADJUSTMENT DECISION SUPPORT SYSTEM END MILLS FOR PROGRAMMING MACHINING ON CNC MACHINES
Article Sidebar
Main Article Content
Abstract
Based on the analysis of the cutting conditions of the milling cutters and their geometric parameters, a approach to modeling the rational positions of the coordinate systems of the workpiece and tool at the beginning and end points of the cutting paths, as well as the values of the cutting tools during face milling with modern carbide plates, is proposed, which provides the minimum values of the cutting lengths and working strokes. The presented decision support system makes it possible to perform automated calculation of the specified parameters for dimensional adjustment of milling machines. The use of the system in machine-building enterprises makes it possible: to reduce the cost of processing flat surfaces with end mills due to the reduction of the main (machine) time by minimizing the values of the working strokes of the cutters; to increase the service life and the stand-up period of the cutter due to the appointment of the sparing cutting modes recommended by tool manufacturers in the area of dynamic loads when cutting the cutters. The results of the work can also be useful in organizations specializing in the development of CAM systems and the educational process.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Iscar: МР [Электронный ресурс] / Сайт производителя. – Режим доступа: https://mpwr.iscar.com/MachiningPower. – Дата доступа: 02.04.2021.
Sandvik coromant: режимы резания [Электронный ресурс] / Сайт производителя. – Режим доступа: https://www.sandvik.coromant.com/ru-ru/products/Pages/toolguide.aspx. – Дата доступа: 26.03.2021.
Walter: калькулятор для расчета режимов резания [Электронный ресурс] / Сайт производителя. – Режим доступа: https://www.walter-tools.com/ru-ru/press/media-portal/apps/tools-more/pages/default.aspx. – Дата доступа: 26.03.2021.
Бортс, А. В приоритете разработчика – повышение эффективности программирования обработки на станках с ЧПУ. Что нового в Mastercam 2021 / А. Бортс, В. Воржаков // CAD/CAM/CAE Observer. – 2020. – № 4 (136). – C. 58–63.
Основы разработки управляющих программ для станков с ЧПУ в системе SiemensNX : учеб. пособие / М.С. Аносов [и др.]. – Ниж. Новгород : Нижегород. гос. техн. ун-т им. Р.Е. Алексеева, 2019. – 110 с.
Компас 3-D. Модуль ЧПУ: Фрезерная обработка [Электронный ресурс] / Сайт производителя. – Режим доступа: https://kompas.ru/kompas-3d/application/machinery/module-chpu-fo/. – Дата доступа: 26.03.2021.
Hexagon. Manufacturing Intelligence: edgecam [Электронный ресурс] / Сайт производителя. – Режим доступа: http://www.edgecamsoftware.ru/edgecam-mill-turn/. – Дата доступа: 26.03.2021.
SolidCAM. The Leaders in integrated CAM: SolidCAM – полноценное CAM htitybt [Электронный ресурс] / Сайт производителя. – Режим доступа: https://www.solidcam.com/ru/cam-reshenija/moduli-cam/. – Дата доступа: 26.03.2021.
Долматовский, Г.А. Справочник технолога по обработке металлов резанием / Г.А. Долматовский. – Изд. 3-е, перераб. – М. : Машгиз, 1962. – 1228 с.
Справочник технолога-машиностроителя : в 2 т. / под ред. А.М. Дальского [и др.]. – 5-е изд., перераб. и доп. – М. : Машиностроение, 2001. – Т. 2. – 941 с.
Справочник технолога-машиностроителя : в 2 т. / под ред. А.С. Васильева, А.А. Кутина. – 6-е изд., перераб. и доп. – М. : Инновац. машиностроение, 2018. – Т. 2. – 818 с.
Беляков, Н.В. Современные тенденции развития оборудования и инструмента для изготовления деталей машин : учеб. пособие / Н.В. Беляков, В.А. Горохов. – Витебск : ВГТУ, 2021. – 639 с.
Попок, Н.Н. Основы технологии машиностроения : учеб. пособие / Н.Н. Попок, В.И. Абрамов. – Новополоцк : ПГУ, 2020. – 271 с.
Most read articles by the same author(s)
- N. POPOK, N. BELYAKOV, D. YASNEV, DECISION SUPPORT SYSTEM FOR BASING MODELS OF MACHINE PARTS IN THE WORKING AREA OF 3D-PRINTERS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2022)
- N. POPOK, N. BELYAKOV, AUTOMATED SELECTION SYSTEM FOR MEASURING GEOMETRIC VALUES FOR TECHNOLOGICAL PREPARATION OF ADDITIVE AND SUBTRACTIVE ENGINEERING INDUSTRIES DETAILS OF COMPLEX SHAPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- N. POPOK, N. BELYAKOV, Y. MAKHARINSKY, D. LATUSHKIN, PRACTICAL APPLICATION OF BASING THEORY FOR SYNTHESIS UNIVERSAL-PREFABRICATED DEVICES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- N. POPOK, V. ANISIMOV, KINEMATICS OF PROCESSING SURFACES OF PARTS WITH A ROTATING CUTTING TOOL WITH A TANGENT MOVEMENT OF THE CUTTING EDGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- N. POPOK, V. ANISIMOV, DEFORMATION AND CHIP FORMATION WHEN PROCESSING FLAT AND CURVED SURFACES OF PARTS WITH A ROTATING CUTTING TOOL ON CNC LATHES AND MILLING MACHINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2020)
- N. POPOK, НАУЧНЫЕ ШКОЛЫ НПИ – ПГУ В МАШИНОСТРОЕНИИ: СОЗДАНИЕ И РАЗВИТИЕ, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- N. POPOK, A. GERASIMOV, E. TIKHON, IMPROVING THE ACCURACY OF BLOCK-MODULAR BORING CUTTING TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- N. POPOK, S. PORTSIANKO, METHODOLOGY FOR STUDYING THE PERFORMANCE OF AXIAL MILLING AND CUTTING TOOLS BASED ON 3D-PROTOTYPING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- N. POPOK, S. PORTYANKO, E. TIKHON, TECHNOLOGY FOR DESIGNING BLOCK-MODULAR CUTTING TOOLS USING 3D-PRINTING OF MODELS PLASTIC MATERIALS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- N. POPOK, R. HMELNICKY, V. ANISIMOV, PROCESSING TECHNOLOGY FOR PARTIAL SPHERICAL SURFACES OF MACHINE PARTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)