METHODOLOGICAL FOUNDATIONS OF THE SYNTHESIS OF SHAPING KINEMATICS AND KINEMATIC SCHEME TREATMENT IN THE COURSE OF FUNCTIONAL DESIGN OF MACHINE-TOOL EQUIPMENT
Article Sidebar
Main Article Content
Abstract
Basic tasks of the synthesis of shaping kinematics and kinematic scheme treatment at the functional design phase of shape-generating machine systems are considered. It is shown that simplification of the machine kinematics and improvements of its enduring accuracy provide the following: structure synthesis of slave movements, creating favorable conditions for treatment process and for work of the machine mechanism by exception of reverse motion; combination of slave movements for simplicity of kinematic scheme treatment and efficiency improving; added movements introduction; assignment of rational combination of rates and directions of elementary motions or regulation of their rates for managing of shaping and cutting conditions; rational distribution of elementary motions between machine final elements to provide its versatility.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Васильев, Г.Н. Автоматизация проектирования металлорежущих станков / Г.Н. Васильев. – М.: Машиностроение, 1987. – 280 с.
Данилов, В.А. Синтез рациональных общих схем обработки при проектировании станков / В.А. Данилов // Вестн. Полоц. гос. ун-та. Сер. В. Прикладные науки. – 2011. – № 11. – С. 89 – 96.
Коновалов, Е.Г. Основы новых способов металлообработки / Е.Г. Коновалов. – Минск: Изд-во АН БССР, 1961. – 257 с.
Федотенок, А.А. Кинематическая структура металлорежущих станков / А.А. Федотенок. – М.: Машиностроение, 1970. – 403 с.
Данилов, В.А. Формообразующая обработка сложных поверхностей резанием / В.А. Данилов. – Минск: Наука и техника, 1995. – 264 с.
Данилов, В.А. Общие принципы управления формообразованием при обработке резанием / В.А. Данилов, В.А. Терентьев // Машиностроение: республ. межведомств. сб. науч. тр. Вып. 20: в 2-х т. Т. 1; под ред. И.П. Филонова. – Минск: УП «Технопринт», 2004. – С. 21 – 26.
Данилов, В.А. Синтез внутренних связей кинематических групп при проектировании металлорежущих станков / В.А. Данилов // Машиностроение: республ. межведомств. сб. науч. тр. Вып. 25. – Минск: БНТУ, 2010. – С. 312 – 318.
Данилов, В.А. Кинематическое формирование производящих линий поверхности при обработке резанием на базе циклоидальных кривых / В.А. Данилов, Л.А. Данилова // Вестн. Полоц. гос. ун-та. Сер. В. Прикладные науки. – 2004. – № 12. – С. 44 – 53.
Родин, П.Р. Основы формообразования поверхностей резанием / П.Р. Родин. – Киев: Вища школа, 1977. – 192 с.
Most read articles by the same author(s)
- V. DANILOV, A. SELICKI, ANALYSIS OF THE SINE WAVE PROCESSING SCHEME CYLINDRICAL SURFACES WITH AN ECCENTRICALLY MOUNTED FORCIBLY ROTATING CIRCULAR CUTTER, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- V. DANILOV, A. SIALITSKIY, WEAR AND DURABILITY OF THE TOOL AT ROTARY TURNING OF SINUSOIDAL PROFILE SURFACES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- V. DANILOV, A. DANILOV, ANALYSIS AND REALIZATION OF CONTROL METHOD OF COMPLEX MULTI-FACETED SURFACE MACROGEOMETRY IN METAL-CUTTING TECHNOLOGY, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2015)
- V. DANILOV, A. DANILOV, TOPOLOGY MANAGEMENT OF NON-CIRCULAR SURFACES TREATED UNDER THE SHEMEOF INCOMLETE SHAPING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2015)
- V. DANILOV, A. SELITSKY, ANALYSIS OF THE ROTATION SCHEME OF NON-CIRCULAR SURFACES WITH AN EXCENTIALLY INSTALLED ROUND CUT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2017)
- V. DANILOV, A. DANILOV, ANALYSIS AND REALIZATION OF METHODS OF SHAPING NON-CIRCULAR SURFACES OF PROFILED TORQUE TRANSMITTING CONNECTION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2014)
- V. DANILOV, R. KISELEV, O. YALOVSKI, STRUCTURAL AND PARAMETRIC SYNTHESIS OF THE FORMATIVE SYSTEMS OF MACHINE EQUIPMENT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2014)
- V. DANILOV, THE MODULAR STRUCTURE OF FORMING SYSTEMS IN THE FUNCTIONAL DESIGN OF MACHINE TOOLS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2013)
- V. DANILOV, R. KISELYOV, V. KRUTKO, FEATURES OF BUILDING SYSTEMS PROCESS EQUIPMENT SHAPE MODULAR TYPE MATERIAL CUTTING ENERGY BEAM, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2012)
- V. DANILOV, REALIZATION OF FUNCTIONAL CONNECTIONS IN SHAPE-GENERATING SYSTEMS OF MACHINE-TOOL EQUIPMENT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2013)