IMPROVEMENT OF THE WORKING CHAMBER MODEL OF A CHAIN TECHNOLOGICAL AGGREGATE
Article Sidebar
Main Article Content
Abstract
The improvement made to the structure of the filled working chamber of the chain technological aggregate brings its model closer to the actual design and, thereby, enables a more accurate investigation of the technological process occurring within it. The article presents algorithms for the approximate determination of the coordinates of the center of mass of the material filling the working chamber, as well as its velocity and acceleration. Graphs of the changes in the kinematic characteristics of the center of mass are constructed as functions of the crank rotation angle. Geometric parameters and kinematic characteristics corresponding to the experimental prototype of the chain aggregate were selected for plotting these graphs. The obtained results in the form of graphs allow analyzing the motion of substance particles, their velocities and accelerations, which are necessary for the analysis of impact effects in the working chamber, as well as for selecting its geometric parameters. The developed algorithm can be used to refine the calculation of the required engine power.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Интенсификация технологических процессов в аппаратах адаптивного действия / Л.А. Сиваченко, Л.Л. Сотник, Т.Л. Сиваченко и др.; под науч. ред. Л.А. Сиваченко. – Барановичи: Баранович. гос. ун-т, 2020. – 359 с.
Цепной агрегат в технологии сортировки твердых коммунальных отходов / В.А. Потапов, Л.А. Сиваченко, В.О. Китиков и др. // Научно-технический прогресс в жилищно-коммунальном хозяйстве: сб. тр. / Ин-т жилищ.-коммун. хоз-ва НАН Беларуси; под общ. ред. В.О. Китикова. – Минск: БГУИР, 2025. – С. 160–166.
Сиваченко Л.А., Потапов В.А., Русан С.И. Цепные технологические агрегаты: монография. – Могилев: Белорус.-Рос. ун-т, 2025. – 164 с.
Патапаў У.А., Русан C.I., Сівачэнка Л.А. Мадэліраванне і аналіз сілавога ўзаемадзеяння звенняў у рабочай камеры ланцужнага агрэгата // Вестн. Брест. гос. техн. ун-та. Машиностроение. – 2023. – № 1(130). – С. 95–108. DOI: 10.36773/1818-1112-2023-130-1-95-108
Распрацоўка алгарытму аналітычнага метаду кінематычнага аналізу чатырохзвеннага механізма ланцужнага агрэгата / У.А. Патапаў, С.І. Русан, Л.А. Сівачэнка і інш. // Вестн. Брест. гос. техн. ун-та. Машиностроение. – 2022. – № 2(128). – С. 105–112. DOI: 10.36773/1818-1112-2022-128-2-105-112
Агляд аналітычных метадаў кінематычнага аналізу прываднога механізма ланцужнага агрэгата / У.А. Патапаў, С.І. Русан, Л.С. Сідор і інш. // Вестн. Полоц. гос. ун-та. Серия B, Промышленность. Прикладные науки. – 2025. – № 2. – С. 8–17. DOI: 10.52928/2070-1616-2025-52-2-8-17
Most read articles by the same author(s)
- V. POTAPOV, S. RUSAN, L. SIVACHENKO, STUDY OF THE EQUILIBRIUM POSITION OF THE MECHANISMS OF THE WORKING CHAMBER OF A CHAIN UNIT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- V. POTAPOV, A. SANKO, IMPROVING THE QUALITY OF DIAGNOSTICS OF AN AXIAL COMPRESSOR OF A HELICOPTER GAS TURBINE ENGINE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2023)
- V. POTAPOV, S. RUSAN, E. SIDOR, L. SIVACHENKO, REVIEW OF ANALYTICAL METHODS OF KINEMATIC ANALYSIS OF THE DRIVE MECHANISM OF A CHAIN UNIT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2025)
- V. MALERONOK, V. POTAPOV, S. ROMANIONOK, РАСЧЕТНО-ГРАФИЧЕСКИЙ СПОСОБ ПРОВЕРКИ И ТАРИРОВКИ ТЕНЗОМЕТРИЧЕСКИХ ДАТЧИКОВ АЭРОДИНАМИЧЕСКИХ ВЕСОВ, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2024)
- L. SIVACHENKO, N. KUROCHKIN, M. KIRKOR, R. BONDAREV, T. SIVACHENKO, NEW TECHNOLOGY EQUIPMENT FOR COMPREHENSIVE FOOD PROCESSING RAW PLANT ORIGIN, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2014)