OBTAINING A MODIFYING ADDITIVE FOR BUILDING MIXTURES BASED ON SYNTHETIC FIBER PRODUCTION WASTE
Article Sidebar
Main Article Content
Abstract
An analysis was made of the possibility of using technical waste in the production of synthetic fiber Nitron-D to obtain a modifying additive for building mixtures. An analysis was made of the possibility of using technical waste in the production of synthetic fiber Nitron-D to obtain a modifying additive for building mixtures. A comprehensive analysis of the effectiveness of a modifying additive for building mixtures based on waste from the production of synthetic fibers makes it possible to predict an increase in the plasticity of the mixture and its corrosion resistance, a decrease in W / C, an increase in the workability of building mixtures and a simplification of their surface machinability; increasing the cohesiveness and non-separability of building mixtures at low cement consumption, as well as their high pumpability with concrete pumps. Recycling of waste from the production of synthetic fiber will expand the range of products, reduce the amount of waste to be disposed of and recycled, which, in turn, will reduce the negative burden on the environment and will allow organizations to become resource-saving, low-waste and waste-free.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Shvedov, A.P., Yakubovskii, S.F. & Shvedov, A.A. (2014). Sostav uglevodorodnogo syr'ya i osobennosti tekhnologicheskogo protsessa polucheniya plastifitsiruyushchikh dobavok v betonnye smesi [Composition of hydrocarbon raw materials and features of the technological process of obtaining plasticizing additives in concrete mixtures]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F. Stroitel'stvo. Prikladnye nauki [Bulletin of the Polotsk State University. Series F. Construction. Applied Sciences], (8), 72–79. (In Russ., abstr. in Engl.)
Shvedov, A.P. & Yakubovskii, S.F. (2011). Proizvodstvo khimicheskikh dobavok v betony na osnove sul'firovaniya produktov neorganicheskikh proizvodstv [Production of chemical additives in concrete based on sulfonation of inorganic products]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya B, Promyshlennost'. Prikladnye nauki [Bulletin of the Polotsk State University. Series B, Industry. Applied sciences], (11), 143–148. (In Russ., abstr. in Engl.)
Shvedov, A.P. & Yakubovskii, S.F. (2008). Tekhnologii sinteza superplastifikatorov na osnove naftalinovykh soedinenii [Technologies for the synthesis of superplasticizers based on naphthalene compounds]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F. Stroitel'stvo. Prikladnye nauki [Bulletin of the Polotsk State University. Series F. Construction. Applied Sciences], (8), 75–78. (In Russ., abstr. in Engl.)
Shvedov, A.P., Yakubovskii, S.F. & Zubova A.V. (2007). Rasshirenie syr'evoi bazy dlya proizvodstva superplastifikatorov [Expansion of the raw material base for the production of superplasticizers]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F. Stroitel'stvo. Prikladnye nauki [Bulletin of the Polotsk State University. Series F. Construction. Applied Sciences], (12), 68–72. (In Russ., abstr. in Engl.)
Shvedov, A.P. & Yakubovskii, S.F. (2006). Razvitie tekhnologii polucheniya plastifikatora betonnykh smesei na osnove tyazhelykh zhidkikh produktov piroliza [Development of technology for obtaining a plasticizer for concrete mixtures based on heavy liquid pyrolysis products]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya B, Promyshlennost'. Prikladnye nauki [Bulletin of the Polotsk State University. Series B, Industry. Applied sciences], (3), 45–49. (In Russ., abstr. in Engl.)
Yakubovskii, S.F. & Shvedov, A.P. (2006). Vozmozhnosti rasshireniya syr'evoi bazy dlya proizvodstva superplastifikatorov [Possibilities of expanding the raw material base for the production of superplasticizers]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya B, Promyshlennost'. Prikladnye nauki [Bulletin of the Polotsk State University. Series B, Industry. Applied sciences], (3), 50–52. (In Russ., abstr. in Engl.)
Senchuk, N.V. (2010). Ogranichenie vodopritokov v skvazhiny s ispol'zovaniem reagenta OVP-1 [Restriction of water inflows into wells using the reagent ORP-1]. Trudy BGTU. Seriya IV. Khimiya, tekhnologiya organicheskikh veshchestv i biotekhnologiya [Proceedings of BSTU. Series IV. Chemistry, technology of organic substances and biotechnology], 66–70. (In Russ., abstr. in Engl.)
Senchuk, N.V. & Makarevich, A.V. (2011). Polimernyi reagent na osnove gidrolizovannogo poliakrilonitrila dlya ogranicheniya vodopritokov v neftyanye skvazhiny [Polymer reagent based on hydrolyzed polyacrylonitrile for limiting water inflow into oil wells]. Trudy BGTU [Proceedings of BSTU], 4(142), 107–113. (In Russ., abstr. in Engl.)
Makarevich, A.V., Pysenkov, V.G., Lymar', P.V., Pirozhkov, V.V., Parkalova, E.I., Mel'gui, A.V., … Senchuk, N.V. (2008). Reagent «OVP-1» – Primenenie v tekhnologiyakh ogranicheniya vodopritoka i povysheniya nefteotdachi plastov [Reagent “OVP-1” – Application in technologies for limiting water inflow and increasing oil recovery]. Neftepromyslovoe delo [Oilfield business],(2), 26–29. (In Russ., abstr. in Engl.)
Senchuk, N.V., Makarevich, A.V. & Pushnova G.M. (2011). Tekhnologicheskie otkhody poliakrilonitril'nogo volokna – tsennyi s-r'evoi resurs pri proizvodstve reagentov dlya ogranicheniya vodopritoka v neftyanye skvazhiny [Technological waste of polyacrylonitrile fiber – a valuable raw material resource in the production of reagents to limit water inflow into oil wells]. Ekologiya promyshlennogo proizvodstva [Ecology of industrial production], (2), 45–48. (In Russ., abstr. in Engl.)