RESTORATION OF DETAILS OF CARS TAKING INTO ACCOUNT INFLUENCE OF HEATPHYSICAL AND MECHANICAL PROPERTIES OF MATERIALS
Article Sidebar
Main Article Content
Abstract
In work theoretical researches during which dependences of size of axial deformation of elements of the restored detail on the module of elasticity, temperatures of heating and temperature coefficient of linear expansion of material of the restored product and the material used for their restoration are received are conducted. The received dependences allow to predict the stretching tension in the applied material. Also there is an opportunity to determine shortening of a shaft in case of its restoration by a overlaying and the size of width of a crack which is able to pull together the welded seam put with the chosen material. The offered way of tea leaves of cracks cross seams gives such advantages as an exception of heating of preparation, cutting, spotting of the ends of cracks and the subsequent machining of seams, provides the greatest tightness, pulls together a crack due to the increased longitudinal shrinkage of welded seams; gives firmness against formation of cold and hot cracks.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
A. KASTRUK, Polotsk State University
канд. техн. наук, доц.
A. DUDAN, Polotsk State University
канд. техн. наук, доц.
T. VIGERINA, Polotsk State University
канд. техн. наук
References
Кастрюк, А.П. Устранение сваркой трещин в корпусных деталях / А.П. Кастрюк // Инновационные технологии, автоматизация и мехатроника в машино- и приборостроении: тез. науч.-практ. семинара, Минск, 10–13 апр. 2012 г.). – Минск: БНТУ. – 2012. – С. 104–105.
Иванов, В.П. Ремонт машин. Технология, оборудование, организация: учебник / В.П. Иванов. – 2-е изд. перераб. и доп. – Новополоцк: УО «ПГУ», 2006. – 448 с.
Вигерина, Т.В. Влияние наплавки на длину коленчатого вала при восстановлении / Т.В. Вигерина // Вестн. БНТУ. – 2011. – № 6. – С. 14–18.
Кастрюк, А.П. Ресурсосбережение и качество ремонта агрегатов машин с восстановлением их деталей: науч. изд. / А.П. Кастрюк, Т.В. Вигерина. – Новополоцк: ПГУ, 2012. – 199 с.
Most read articles by the same author(s)
- D. KAPSKY, D. LEVANOVICH, T. VIGERINA, A. GOLOVNICH, APPLICATION OF VIDEO TRAFFIC MONITORING METHODS: THEORETICAL AND PRACTICAL BASIS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- A. DUBKO, N. CHVERTKO, A. LEBEDEV, A. DUDAN, HISTORICAL ASPECTS OF THE DEVELOPMENT OF ELECTROSURGERY, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- V. ZHORNIK, A. ZAPOLSKY, A. IVAKHNIK, A. DUDAN, TECHNOLOGIES AND EQUIPMENT FOR PRODUCTION BIODEGRADABLE GREASES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2022)
- A. DUDAN, T. VIGERINA, V. KRAVCHUK, I. PILIPENOK, INCREASED WEAR RESISTANCE OF PARTS HEAVY-LOADED FRICTION ASSEMBLY OF VEHICLES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- S. PYLYPENKO, A. DUDAN, D. RADULЕVIC, INFLUENCE OF THE BENDING RADIUS OF PIPES ON STRENGTH PARAMETERS AUTOMOBILE PIPELINES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- D. KAPSKY, D. LEVANOVIC, T. VIGERINA, A. GOLOVNICH, USTIFICATION OF THE CHOICE OF MEANS AND PROCESSES OF SPEED CONTROL VEHICLE MOVEMENT, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2022)
- T. VIGERINA, V. FRUCKI, V. KOSTRICKI, RESTORATION OF THE BENT SHAFT INSERTS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- A. GRIGORCHIK, E. ASTRASHAB, M. BELOTSERKOVSKIY, V. KUKAREKO, A. SOSNOVSKIY, A. DUDAN, WEAR RESISTANCE OF GAS-THERMAL COATINGS FROM COPPER-ALLOYS ON THE BASIS OF COPPER OBTAINED BY HIGH-SPEED METALLIZATION METHOD, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- М. BELOTSERKOVSKIJ, A. DUDAN, A. YALOVIK, RECONDITIONING AND TESTING OF A HYDROLIC POWER CYLIN-DER ROD, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2021)
- M. BELOTSERKOVSKY, I. TARAN, P. KOT, A. DUDAN, TECHNOLOGY FOR OBTAINING AND TRIBOTECHNICAL CHARACTERISTICS OF OXIDIZED ALUMINUM COATINGS APPLIED TO POLYMERS , Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)