RESTORATION OF DETAILS OF CARS TAKING INTO ACCOUNT INFLUENCE OF HEATPHYSICAL AND MECHANICAL PROPERTIES OF MATERIALS
Article Sidebar
Main Article Content
Abstract
In work theoretical researches during which dependences of size of axial deformation of elements of the restored detail on the module of elasticity, temperatures of heating and temperature coefficient of linear expansion of material of the restored product and the material used for their restoration are received are conducted. The received dependences allow to predict the stretching tension in the applied material. Also there is an opportunity to determine shortening of a shaft in case of its restoration by a overlaying and the size of width of a crack which is able to pull together the welded seam put with the chosen material. The offered way of tea leaves of cracks cross seams gives such advantages as an exception of heating of preparation, cutting, spotting of the ends of cracks and the subsequent machining of seams, provides the greatest tightness, pulls together a crack due to the increased longitudinal shrinkage of welded seams; gives firmness against formation of cold and hot cracks.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Кастрюк, А.П. Устранение сваркой трещин в корпусных деталях / А.П. Кастрюк // Инновационные технологии, автоматизация и мехатроника в машино- и приборостроении: тез. науч.-практ. семинара, Минск, 10–13 апр. 2012 г.). – Минск: БНТУ. – 2012. – С. 104–105.
Иванов, В.П. Ремонт машин. Технология, оборудование, организация: учебник / В.П. Иванов. – 2-е изд. перераб. и доп. – Новополоцк: УО «ПГУ», 2006. – 448 с.
Вигерина, Т.В. Влияние наплавки на длину коленчатого вала при восстановлении / Т.В. Вигерина // Вестн. БНТУ. – 2011. – № 6. – С. 14–18.
Кастрюк, А.П. Ресурсосбережение и качество ремонта агрегатов машин с восстановлением их деталей: науч. изд. / А.П. Кастрюк, Т.В. Вигерина. – Новополоцк: ПГУ, 2012. – 199 с.
Most read articles by the same author(s)
- А. SMYRNOV, Т. SMYRNOVА, А. DREEV, A. DUDAN, OPTIMIZATION OF THE TECHNOLOGICAL PROCESS OF RESTORING AND STRENGTHENING SURFACES WITH TASKED CHARACTERISTICS AS A CLOUD SERVICE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2020)
- S. PILIPENKO, V. TERESHCHENKO, A. DUDAN, INFLUENCE OF COLD PIPE ROLLING PARAMETERS TO CHANGE THE WALL THICKNESS ALONG THE CONF OF DEFORMATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- M. M., A. SOSNOVSKIY, A. GRIGORCHIK, A. ELOVIC, A. DUDAN, FEATURES OF COATINGS OF PSEUDOPLANES METHOD OF HYPERSONIC METALLIZATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- V. ZHORNIK, S. KOVALEVA, M. BELOTSERKOVSKY, P. VITYAZ, T. GRIGORYEVA, A. DUDAN, INFLUENCE OF MECHANICAL ACTIVATION ON STRUCTURE OF COMPOSITE POWDERS BASED ON ULTRAHIGH-MOLECULAR WEIGTH POLYETHYLENE FILLED BY BORON CARBIDE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- A. DUDAN, A. RUTKOVSKY, M. AHIEIEV, V. MIRNENKO, Т. SMYRNOVА, O. RADKO, INCREASING THE STRENGTH PROPERTIES OF SURFACES OF STEEL PARTS VACUUM THERMOCYCLIC NITROGENIZATION IN PLASMA OF PULSATING GREAT DISCHARGE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- D. KAPSKIY, A. GOLOVNICH, T. VIGERINA, V. KUZMENKO, A. KRASILNIKOVA, Ye. GORELIK, S. SEMCHENKOV, Ye. KOT, DEVELOPMENT OF URBAN TRANSPORT IN THE CITIES OF POLOTSK AND NOVOPOLOTSK, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)
- V. IVANOV, T. VIGERINA, DIRECTIONS FOR IMPROVING STUDENT TRAINING FOR THE SPECIALTY «TECHNICAL MAINTENANCE OF VEHICLES», Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- V. IVANOV, T. VIGERINA, RESOURCE-SAVING RUN-IN OF INTERNAL COMBUSTION ENGINES AT USE OF OIL MODIFYING ADDITIVES, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)
- A. DUDAN, V. LOPATA, V. KALINICHENKO, A. LOPATA, T. IVCHENKO, A. GRISHENKO, USE OF WORKING BODIES WITH DISCRETE COVERINGS TO INCREASE THE EFFICIENCY OF GRAIN CRUSHING, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)