PARAMETERS OF THE DEFORMATION CONTAINMENT VOLUME AT THE BACKWARD STROKE OF COLD-DIE-PILGERING AND COLD-ROLLER-PILGERING MILLS WHEN FEEDING THE BILLET IN EITHER POSITIONS OF THE STAND
Article Sidebar
Main Article Content
Abstract
The results of research concerning the development of the theoretical foundations for determining the value of pipe compression by wall thickness in the deformation site, during the reverse working flow of the cage, the cold pilger rolling mill of pipes are presented. Simplified dependencies are derived in the work to calculate the compression parameters during the reverse working stroke of the rolling stand. The proposed dependencies do not take into account the elastic deformations of the rolling mill stand. This will be associated with the further development of the method for calculating the deformation parameters of the considered case of conducting the cold pilger rolling process.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Danchenko, V.N., Kolikov, A.P., Romantsev, B.A. & Samusev, S.V. (2002). Tekhnologiya trubnogo proizvodstva. Moscow: Intermet Inzhiniring. (In Russ.)
Stoletnii, M.F. & Klempert, E.D. (1975). Tochnost' trub. Moscow: Metallurgiya. (In Russ.)
Shevakin, Yu.F. (1963). Kalibrovka i usiliya pri kholodnoi prokatke trub. Moscow: Metallurgizdat. (In Russ.)
Popov, M.V., Atanasov, S.V. & Belikov, Yu.M. (2008). Sovershenstvovanie protsessa periodicheskoi prokatki trub. Dnepropetrovsk: Diva. (In Russ.)
Osada, Ya.E., Plyatskovskii, O.A. & Belikov, Yu.M. (1978). Opredelenie obzhatii pri periodicheskoi prokatke trub na stanakh KhPT pri podache zagotovki v oboikh krainikh polozheniyakh kleti. Stal', (5), 452–454. (In Russ.)
Belikov, Yu.M., Golovchenko, A.P., Tereshchenko, A.A., Frolov, Ya.V., Grigorenko, V.U. & Dekhtyarev, V.S. (2009). Opredelenie obzhatii pri periodicheskoi prokatke trub na stanakh KhPT pri podache zagotovki v oboikh krainikh polozheniyakh kleti [Determination of wringing out at the periodic rolling of pipes on the figures of CRP at the serve of purveyance in both extreme positions of cage]. Obrabotka materialov davleniem [Materials working by pressure], 2(21), 294–299. (In Russ., abstr. in Engl., in Ukrainian)
Pilipenko, S.V. (2022). Teoreticheskie osnovy kholodnoi pil'gernoi prokatki trub. Novopolotsk: Euphrosyne Polotskaya State University of Polotsk. (In Russ.)
Pilipenko, S.V., Grigorenko, V.U., Kozechko, V.A. & Bohdanov, O.O. (2021). A deformation mode in a cold rolling condition to provide the necessary texture of the Ti-3Al-2.5V alloy. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 078–083.
Most read articles by the same author(s)
- V. FRUCKI, S. PILIPENKO, ALTERNATIVE MATERIALS REPAIR ROTARY GROUP, THE PUMP-MOTORS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2019)
- S. PILIPENKO, O. SHTEMPEL, V. FRUTSKIY, V. KOSTRITSKIY, RESTORING THE FUNCTIONALITY OF THE “NEEDLE-BODY” CONNECTION OF THE DIESEL ENGINE NOZZLE SPRAYER, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- V. DʹYAKONOV, S. PILIPENKO, O. SHTEMPELʹ, INFLUENCE OF DEFORMATION ON THE MECHANICAL PROPERTIES OF TIN-PLATED TIN, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- S. PILIPENKO, V. GRIGORENKO, INCREASING THE ACCURACY OF DETERMINING THE Q-FACTOR IN CONTROL SECTIONS OF THE STAN DEFORMATION CONE COLD PILGER ROLLING PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2021)
- A. RADIONOV, N. ZAKREVSKAYA, S. PILIPENKO, O. SHTEMPEL', ANNEALING OF COLD-ROLLED STRIPS IN SHIELDING GAS ATMOSPHERE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2023)
- S. PILIPENKO, V. TERESHCHENKO, A. DUDAN, INFLUENCE OF COLD PIPE ROLLING PARAMETERS TO CHANGE THE WALL THICKNESS ALONG THE CONF OF DEFORMATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2018)
- S. PILIPENKO, A. DUDAN, DEVELOPMENT OF THE METHOD OF CALCULATION OF HEAT EXCHANGES FROM PLASTIC DEFORMATION AT COLD PILGRER ROLLER PIPE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- S. PILIPENKO, V. FRUCKI, M. KONON, THERMAL PROPERTIES OF GAS-THERMAL REPAIR COATINGS SHAFTS TO FIT BEARINGS , Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- S. PILIPENKO, METHOD FOR CALCULATION OF BROADENING DURING COLD ROLLING OF STRIPS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- S. PILIPENKO, ANALYSIS OF THE INFLUENCE OF SEPARATE CALIBRATION PARAMETERS OF THE WORKING TOOL OF THE COLD ROLLING PIPES MILLS ON THE Q-FACTOR DISTRIBUTION ALONG THE DEFORMATION CONE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2020)