MODIFICATION OF BITUMINOUS BINDERS WITH PETROCHEMISTRY WASTE
Article Sidebar
Main Article Content
Abstract
An analysis was made of the possibility of using sludge from the production of sulfonate additives and low molecular weight polyethylene for the modification of bituminous materials. It has been established that the combined effect of the components of the proposed combined additive on the structure of the bituminous binder makes it possible to increase its heat resistance, plasticity and elasticity, with acceptable adhesion to the surfaces of mineral materials. Modification of road bitumen with a combined additive based on sludge from the production of a sulfonate additive and low molecular weight polyethylene will expand the range of polymer modifiers for polymer-bitumen compositions, reduce the involvement of imported additives, reduce the burden on the environment and obtain a positive economic effect.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Gainanova, R.N., Kolysheva, E.O., Budnik, V.A., Evdokimova, N.G. & Fatkullin, M.R. (2012). Modifikatsiya dorozhnykh bitumov OAO «Gazprom neftekhim Salavat» polimernymi dobavkami, poluchennymi na os-nove otkhodov polietilena vysokogo davleniya [Modification of road bitumens of OAO Gazprom neftekhim Salavat with polymer additives obtained on the basis of high-pressure polyethylene waste]. Neftepererabotka i neftekhimiya. Nauchno-tekhnicheskie dostizheniya i peredovoi opyt [Oil refining and petrochemistry. Scientific and technical achievements and best practices], (8), 19–24. (In Russ., abstr. in Engl.)
Shykhaliev, K.S. & Abdullaieva, I.K. (2017). Issledovaniya protsessa polucheniya pokrytii razlichnogo naznacheniya na osnove modifitsirovannogo polimernymi otkhodami neftyanogo bituma [Research into the process of obtaining coatings for various purposes based on oil bitumen modified with polymer waste]. International Scientific and Practical Conference World science, Т. 3, 8(24), 10–12. (In Russ., abstr. in Engl.)
Syrmanova, K.K., Tleuov, D.B., Botashev, E.T., Rivkina, T.V. & Kaldybekova, Zh.B. (2016). Tekhnologiya uluchsheniya svoistv dorozhnogo bituma modifikatsiei vtorichnym polietilenom [Technology for improving the properties of road bitumen by modification with secondary polyethylene]. Nauchnye trudy YuKGU im. M. Auezova [Scientific works of SKSU named after M. Auezov], 2(37), 20–24. (In Russ., abstr. in Engl.)
Provatorova, G.V. (2021). Ekologicheskie aspekty modifikatsii bituma [Ecological aspects of bitumen modification]. Umnye kompozity v stroitel'stve [Smart composites in construction], T. 2, (1), 47–52. (In Russ., abstr. in Engl.)
Bulavka, Yu.A., Petrovskaya, Yu.S. & Shirabordina, V.S. (2017). Sovremennye al'ternativnye napravleniya promyshlennogo ispol'zovaniya nizkomolekulyarnogo polietilena [Modern alternative directions of industrial use of low molecular weight polyethylene]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya B, Promyshlennost'. Prikladnye nauki [Bulletin of the Polotsk State University. Series B, Industrial. Applied Science], (11), 103–110. (In Russ., abstr. in Engl.)
Pokrovskaya, S.V., Oshchepkova, N.V. & Bulavka, Yu.A. Plastichnye smazki na osnove nizkomolekulyarnogo polietilena zavoda «Polimir» OAO «Naftan» [Plastic lubricants based on low molecular weight polyethylene of the plant “Polymir” JSC “Naftan”]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya B, Promyshlennost'. Prikladnye nauki [Bulletin of the Polotsk State University. Series B, Industrial. Applied Science], (8), 173–176. (In Russ., abstr. in Engl.)
Bulavka, Yu.A., Pokrovskaya, S.V., Sytsevich, V.I., Shirabordina, V.S. & Petrovskaya, Yu.S. Neftyanye kompozitsii na osnove nizkomolekulyarnogo polietilena [Oil compositions based on low molecular weight polyethylene]. Nauka i innovatsii [Science and innovations], T. 6, (172), 31–33.