MODIFICATION OF OIL BITUMEN WITH POLYETHYLENE PRODUCTS
Article Sidebar
Main Article Content
Abstract
The article presents the results of studies on the use of polyolephilic polymers such as high-density polyethylene film, PV-200 polyethylene wax, low-molecular-weight polyethylene, and polyethylene foam in the production of bitumen materials. It was found that the use of polyolefin polymers such as polyethylene foam and polyethylene wax dissolved in waste industrial oil improves the heat and frost resistance of bitumen while expanding its plasticity range. The studies confirmed the potential for recycling polyethylene products in the production of bitumen materials for non-critical construction projects.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Герман А.М., Ширкунов А.С., Рябов В.Г. Применение полиэтилена и стирол-бутадиенстирольных модификаторов для производства дорожных полимерно-битумных вяжущих на базе неокисленных высококипящих нефтепродуктов // Вестник ПНИПУ. Химическая технология и биотехнология. – 2021. – № 4. – С. 55–69.
A comparative life cycle assessment of hot mixes asphalt containing bituminous binder modified with waste and virgin pol-ymers / J. Santos, V. Cerezo, K. Soudani et al. // Procedia CIRP. – 2018. – № 69. – P. 194–199. DOI: 10.1016/j.procir.2017.11.046
A review of the fundamentals of polymer-modified asphalts: Asphalt /polymer interactions and principles of compatibility / G. Polacco, S. Filippi, F. Merusi et al. // Advances in Colloid and Interface Science. – 2015. – № 224 – P. 72–112. DOI: 10.1016/j.cis.2015.07.010
Phase field simulation and microscopic observation of phase separation and thermal stability of polymer modified asphalt / M. Liang, X. Xin, W. Fan et al. // Construction and Building Materials. – 2019. – № 204. – P. 132–143. DOI: 10.1016/j.conbuildmat.2019.01.180
Phase behavior and hot storage characteristics of asphalt modified with various polyethylene: Experimental and numerical characterizations / M. Liang, X. Xin, W. Fan et al. // Construction and Building Materials. – 2019. – № 203. – P. 608–620. DOI: 10.1016/j.conbuildmat.2019.01.095
Nouali М., Ghorbel Е., Derriche Z. Phase separation and thermal degradation of plastic bag waste modified bitumen during high temperature storage // Construction and Building Materials. – 2020. – № 239. – 117872. DOI: 10.1016/j.conbuildmat.2019.117872
Evaluation of the effect of processed plastic additives on the properties of paving grade bitumen / M. Gajewski, R. Horodecka, W. Bañkowski et al. // Roads and Bridges. – 2023. – № 22(03). – Р. 287–307. DOI: 10.7409/rabdim.023.015
Коваленко П.В. Исследование свойств битумно-полимерных композиций // Вестник Полоцкого государственного университета. Серия B, Прикладные науки. Промышленность. – 2008. – № 2. –С. 128–133.
Модифицирование битумных вяжущих отходами нефтехимии / Ю.А. Булавка, К.А. Гришанин, В.С. Слепенков и др. // Вестник Полоцкого государственного университета. Серия В, Промышленность. Прикладные науки. – 2023. – № 2(48). – С. 75–79. DOI: 10.52928/2070-1616-2023-48-2-75-79
Lebedzeva T.I., Bulauka Y.A. Polymer-modifier for the road bitumen manufacture of the fourth generation // Topical Issues of Rational Use of Natural Resources. – 2020. – Vol. 2. – P. 546-552. DOI: 10.1201/9781003014638-10
Нефтяные композиции на основе низкомолекулярного полиэтилена / Ю.А. Булавка, С.В. Покровская, В.И. Сыцевич и др. // Наука и инновации. – 2017. – Т. 6, № 172. – С. 31–33.
Булавка Ю.А., Петровская Ю.С., Ширабордина В.С. Современные альтернативные направления промышленного использования низкомолекулярного полиэтилена // Вестник Полоцкого государственного университета. Серия B, Промышленность. Прикладные науки. – 2017. – № 11. – С. 103–110.
Most read articles by the same author(s)
- V. IVANOV, Y. BULAUKA, A. SUNTSOV, ANALYSIS OF THE DYNAMICS OF OCCUPATIONAL ACCIDENTS IN THE REPUBLIC OF BELARUS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2025)
- S. YAKUBOUSKI, Y. BULAUKA, A. BAKATOVICH, A. ERMAK, D. AZARENKO, OBTAINING A MODIFYING ADDITIVE FOR BUILDING MIXTURES BASED ON SYNTHETIC FIBER PRODUCTION WASTE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2023)
- A. MITINOV, E. SAFRONOVA, Y. BULAUKA, OBTAINING A CERESIN COMPOSITION FROM BY-PRODUCTS OF OIL DEWAXING PROCESS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- Y. BULAUKA, V. SAMUSEVICH, USE OF DIGITAL TOOLS FOR INTEGRATED SOLUTIONS IN THE SPHERE OF LABOR PROTECTION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 11 (2019)
- S. YAKUBOUSKI, Y. BULAUKA, ANALYSIS OF THE SORPTION CAPACITY IN RELATION TO OIL AND PETROLEUM PRODUCTS OF NATURAL PLANT MATERIALS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 10 (2022)
- Y. BULAUKA, V. LIAKHOVICH, REDUCING THE INFLUENCE OF COKE DUST ON WORKERS BY USING DUST-SUPPRESSING-ANTI-FREEZING MEANS, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2020)
- Y. BULAUKA, A. MIALESHKA, ANALYSIS OF THE EFFICIENCY OF RAPID-TESTS TO DETERMINE THE TIME TO REPLACE USED ENGINE OIL, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2023)
- I. KOVALYOVA, Y. BULAUKA, H. MASKALENKA, THE INVESTIGATION OF THE LOW MOLECULAR WEIGHT POLYETHYLENE ON THE VISBREAKING RESIDUE PROPERTIES DURING OXIDATION, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 3 (2018)
- Y. BULAUKA, K. GRISHANIN, V. SLEPENKOV, E. STELMAKH, MODIFICATION OF BITUMINOUS BINDERS WITH PETROCHEMISTRY WASTE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 2 (2023)
- Y. BULAUKA, K. KOZHEMYATOV, IMPROVING THE ALGORITHM FOR NON-DESTRUCTIVE TESTING OF EQUIPMENT OPERATING UNDER EXCESSIVE PRESSURE, Vestnik of Polotsk State University. Part B. Industry. Applied Sciences: No. 1 (2024)